Why is timing important on a Harley Davidson?
Setting the timing correctly keeps your motorcycle running smoothly and efficiently. Maladjusted timing may result in sluggish performance, poor fuel economy and possible damage to internal engine components. Setting the timing is relatively easy and ensures the maximum life from the engine.
How do you time a Harley Davidson engine?
Point the timing light into the timing inspection hole. If the ignition is properly timed, the timing bar will align with the circular timing reference mark. The reference marks on a correctly timed engine will appear as a vertical bar through the center of the circle.
How do you set the timing on a Honda motorcycle?
Carefully turn the motor over using the ratchet and deep socket one time, until the timing mark comes back around to the center of the window. Check all timing marks again. When all marks are aligned, and the tensioner and all pulley bolts have been tightened, install the timing belt covers. Park the motorcycle on its kickstand.
How many horsepower does a Harley Davidson 1200cc have?
Vehicle shown may vary visually by market and may differ from vehicles manufactured and delivered. Availability may vary by market, please see your local dealer for details. Blacked-out chopper profile with the power to go beyond the city limits. 1200cc at your command to deliver tons of torque for an unforgettably fun ride.
How to check the timing on a Harley Davidson motorcycle?
Check the position of the jack on the right side of the bike to ensure that it’s bearing on the frame member and not touching the exhaust pipe. The pipe hangs lower than the frame and you can damage it with the jack. Place the transmission in fifth gear and turn the ignition switch to the “On” position.
What to do when your timing is out of whack?
You need to go through the orange circuit, looking for bad connections to repair, starting where the line splits between the two coils. The diagram implies that there are only two splices between the coil split and the switch; if true, that limits the points to test.
Where is the timing hole on a motorcycle?
The timing hole is located on the primary chain case side of the motor on the engine block and capped with a solid hex-head plug. Install a clear plastic timing hole plug to prevent oil splash. Connect the positive terminal of an inductive timing light to the positive battery terminal of the motorcycle.
Why are my 2 stroke timing out of whack?
This indicates that one coil is able to discharge through the other. Do you have a dual condenser, one with a wire to each point set, and a common case? If so, either the ground to the case is questionable, or the condenser needs replacing. i have 2 points, 2 condensers and 2 coils. they are all pretty much separate..