Why is the fuse not working on my tail lamp?
If you’re not getting +12 to the fuse, then the TAIL LAMP relay is not closing or is defective or there is a wiring/connector issue between the relay and the fuse. Another way to check the fuse (s) is to touch both sides of it with a test light or your meter set to volts.
How are dash lights and tail lights connected?
Tail lights and dash lights are connected through the fuse. Sounds like your fuse is blown. This is a standard thing in all cars (at least before Auto Light controls) When the dash goes dark you know you are driving without tail lights.
What to do if your tail light is not working?
CHECK THE FUSE WITH A METER FIRST. Assuming the fuse is good, then the problem is between the tail lamp relay and the fuse or possibly the logic side of the tail relay. You can jump pins 2-3 (load side) on the relay to see if the rest of the circuit is functioning correctly.
What to do if your dash light is not working?
If your dash lights work but won’t dim and your running light won’t work and your license plate lights are out. Then there are 4 relays directly above the glove box. you can’t see them until you drop the panel.
Why are my dash and tail lights not working?
If your car was damaged to the front and you had to repair any wires, you may connect 2 identical wires together. Also you can mess them up very easy when you connect aftermarket stereo system. They could be identical but wrong wires. Recommend to recheck them at those places that you where working on. Was this answer helpful?
What to do if your dashboard light does not work?
A blown fuse can disable the vehicle’s dashboard light. The fuse box may be under the hood, or near the floor, near the brake pedal, or there may be two fuse boxes in both places. Refer to the diagram on the fuse box cover to locate the correct fuse. Replace the dashboard light fuse if necessary. Note: also check if the tail lights are working.
Where are the fuses for running lights located?
Step 10 – If all running or tail lights are not working, a fuse is used to protect the lighting system from overload and short circuits, anytime more than one light bulb is out, the fuse is the first place to check, these fuses are located in the power distribution center (pdc). Learn More
How can I tell if my tail lights have a fuse?
When you have located the fuse for the tail lights use a fuse tester to check the connection. If the tester lights up – your fuse is functioning fine. If it does not light up then, replace the fuse with another of the similar amperage and size. In many instances, you can see the break in the metal strip of the fuse.