Why is my Mercedes CLS electronic turbo actuator failing?
Professional diagnosis & fitting services available. Sometimes the turbo failure can be due to carbon build up inside the turbocharger unit and in such cases, it is advised to have the turbocharger rebuilt at the same time to avoid damaging the newly rebuilt actuator unit.
Where are the Mercedes-Benz CLS fuse box locations?
Where are the Mercedes-Benz CLS fuse box location? Main fuse and relay box in the engine bay. Left / driver side of engine. Interior fuse box. Located on the left side of dash. Main fuse and relay box in trunk. Front prefuse box. Passenger side front fender. N118 Unit 3 and 4. Fuel Pump Control Unit. Located in the trunk, Right side.
What to do if your Mercedes convertible is not working?
Check the convertible top relay as well. Swap it with a known working relay that is identical. You can also bridge the top relay for a couple of seconds to see if the hydraulic pump start to run. Replace the convertible top relay if necessary, PN 0025421319. Next, check the micro switch where the divider locks.
Where are the fuses located on a SRS restraint?
The unit where the fuses are installed is also called the driver side SAM control unit (N10/1) which has fuses and relays. SRS Restraint system. Tension retractor In the fuse box located on the side of the dash, driver side, you will find fuses 21 to 42. This is the interor fuse box, F34. Seat adjusment, memory for passenger.
Why does the seat switch on my Pelican stop working?
Press backward and the seat moved forward. This can be caused by few different things. In the event that the functions become reversed or stop working, first try pushing the switch forward and holding it there for around ten seconds. This will cause the system to “relearn” the stop positions for the seat.
Is the seat adjustment switch on my Mercedes W210 working?
Shown here is the seat adjustment switch for the Mercedes Benz W210 chassis. The switch itself is a known failure item due to problems with the solder joints on the circuit board. In this article, we will go over the steps with removing, testing and attempting to repair the switch.
How do you reset the ECU on a Mercedes Benz?
Once both windwos are all the way down make both swithches click by pressing them all the way down. This lets the ECU learn that that is the end of the window track and it records it in memeory. Do the same closing the windows by holding both switches and making them click once the windows are all the way up.
Why is my seat adjustment switch not working?
The switch itself is a known failure item due to problems with the solder joints on the circuit board. In this article, we will go over the steps with removing, testing and attempting to repair the switch. Try moving the detents on the switch to full stop and hold them there for around ten seconds.