Why is my Mazda RX8 rotary engine burning oil?
More than not, you will have to check your oil levels, and ensure you’re running a sufficient amount of oil. Perhaps this is the biggest problem with the rotary engine. With this engine you are burning significant amounts of oil, while it is also a challenge to seal off the different chambers.
What kind of engine does a Mazda RX8 have?
What Engine Does a Mazda Rx8 Have? The Mazda RX-8 receives power from the 1.3L RENESIS two-rotor rotary engine that creates 212 horsepower at 7,500 rpm as well as 159 pound-feet of torque at 5,500 rpm. With a manual transmission, the Mazda RX-8 rotary engine can create 232 horsepower at 8,500 rpm.
When to check oil level in Mazda RX-8?
The amount of oil used depends upon how hard the engine is driven. Driving the car without enough oil can severely damage the engine. Mazda recommends checking the oil at every second fuel fill. Before inspecting the oil level, warm up the engine to normal operating temperature. Stop the engine and allow the oil to settle for a minute.
Where is the oil dipstick on a Mazda RX-8?
Mazda recommends checking the oil at every second fuel fill. Before inspecting the oil level, warm up the engine to normal operating temperature. Stop the engine and allow the oil to settle for a minute. Remove the plastic engine cover and standing in front of the bonnet, the oil dipstick is located to the right side of the engine.
What kind of oil should I use in my Mazda RX-8 rotary engine?
For a more detailed explanation of why we recommend 10w40 grade oil for your RX-8 and to find out how using alternative grades can adversely affect your engine, read on… Since way back in 1967, in the days of the Mazda Cosmo 110s, rotary engines have been ran on either 15w40 or 10w40 mineral oil.
The amount of oil used depends upon how hard the engine is driven. Driving the car without enough oil can severely damage the engine. Mazda recommends checking the oil at every second fuel fill. Before inspecting the oil level, warm up the engine to normal operating temperature. Stop the engine and allow the oil to settle for a minute.
What kind of rubber is on Mazda RX-8?
The rubber oil control ring o-ring’s in Mazda’s RX-8 were switched from the traditional rubber base material to a more modern Viton based rubber material which can better withstand the aggressive chemicals in modern oils.
What’s the best way to stop a Mazda RX 8?
Stopping Procedure Should your Mazda RX-8 not reach normal operating temperature before the end of your journey, please use the following stopping procedure: With the engine running and transmission in neutral, increase engine revs to 4,000 rpm. Hold revs at 4,000 rpm for 10 seconds. Turn off the ignition while the engine is running at 4,000 rpm.