Why is my dirt bike clutch so hard to pull in?
There are several factors that can contribute to a stiff clutch. An old, worn or dirty clutch cable is one reason. Other factors include dirty lever, stiff clutch springs, dirty or worn actuator arm or push rod. Clutch position and hand strength can also be a factor.
How do you adjust the clutch cable on a motorcycle?
When it’s turned all the way in like this one, you have run out of adjustment, and therefore it’s time to… … hit the adjuster at the other end of the cable. On my R1, that’s down at the clutch, on the other side of the bike. Loosening the nut on the left with a 12mm wrench lets you pull the cable and sheath free.
How to adjust a motorcycle clutch on a Harley Big Twin?
With the clutch adjusted, snug down the jam nut with your screwdriver. RevZilla photo. With the fight against clutch malfeasance won, it’s time to shield back up and reattach the clutch cover. When doing this on your Harley Big Twin, it is a pretty simple process. Always start this process with your fingers to get the bolts going.
What should the clutch be on a Harley Davidson?
As you mentioned the motor/clutch MUST be stonecold, If you got it right neutral will be very easy to find, and the bike wont lurch or creep when you shift from neutral to first.
Why is my clutch cable too loose on my Harley Davidson?
If you have the cable too tight it won’t allow the clutch to fully engage when it’s supposed to, if you have the cable too loose the clutch will not fully disengage when you pull the clutch lever in both of which will cause premature wear on your clutch components.
How do you adjust the clutch on a Softail Harley?
Bob teaches you how to adjust the clutch and primary chain on your Harley Softail or Dyna model. Be sure to achieve free play on the clutch cable to verify that you have proper adjustment on the clutch cable pack, and check for the proper specs in your service manual for adjusting the primary chain (if your model has the adjustment window).
If you have the cable too tight it won’t allow the clutch to fully engage when it’s supposed to, if you have the cable too loose the clutch will not fully disengage when you pull the clutch lever in both of which will cause premature wear on your clutch components.
When to turn the clutch adjuster on a Harley Davidson?
When you are positive you are exactly at zero lash, no more no less, continue to turn the adjuster in 1/8 to 1/4 of a turn. This will set the preload on the pressure with a bunch of miles on them. it, run the jamnut down and torque it to aprx 1 grunt (thats a technical term).
How do you close the clutch on a Harley?
End of dialog window. This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. Bob teaches you how to adjust the clutch and primary chain on your Harley Softail or Dyna model.