Why does my Chevy C5500 have no crank?
It has no crank not start once you hit the key. Replaced the starter same issue, fuses look good. We did get it to start but by bumping the terminals on the starter with a screw driver. Any thought on what could be going on?
Can a 2006 Chevy C5500 start without a key?
I have a 2006 Chevy C5500 with the duramax. Its a bus and I am going to turn it into a dump truck….hopefully. My issue as i said is no crank no start from the key. I was able to get it started by turning the key on and crossing a screwdriver over the terminals on the starter but I am not able to start it with the key.
Why does my GM car say no start no crank?
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
How can I jump start my Chevy C5500?
1. Battery positive wires to touch the heatsink of the TCM [e.g.When jump starting vehicle] 2. Positive battery power chassis harness wire to pin 10 and pin 70 of the TCM to be wired without fuse protection of 10-15 amps. 3. Physical contact between heatsink and vehicle chassis or other ground circuit points.
It has no crank not start once you hit the key. Replaced the starter same issue, fuses look good. We did get it to start but by bumping the terminals on the starter with a screw driver. Any thought on what could be going on?
I have a 2006 Chevy C5500 with the duramax. Its a bus and I am going to turn it into a dump truck….hopefully. My issue as i said is no crank no start from the key. I was able to get it started by turning the key on and crossing a screwdriver over the terminals on the starter but I am not able to start it with the key.
Why does my GMC Silverado have no crank?
This is a fix for a known electrical issue with the 2003-2007 C/K series GM Trucks where a bad ground causes multiple issues. Such as no start, no crank, intermittent no gauges, and sometimes the theft light would stay on, and the parking lights would stay on.
1. Battery positive wires to touch the heatsink of the TCM [e.g.When jump starting vehicle] 2. Positive battery power chassis harness wire to pin 10 and pin 70 of the TCM to be wired without fuse protection of 10-15 amps. 3. Physical contact between heatsink and vehicle chassis or other ground circuit points.
What causes a Chevy pickup to hard start?
If after you have circled the key a few time the engine starts normally then you now know for sure you have a fuel pressure leak down problem causing your hard start. If this video was helpful please help support my youtube channel by subscribing here: https://www.youtube.com/channel/UChCX…
What should I do if my long crank wont start?
Just a recap of what you should do first to determine if your long crank before starting is fuel related or not. First, before you try cranking the engine over, turn the ignition key to the run position then back off without cranking the starter.
If after you have circled the key a few time the engine starts normally then you now know for sure you have a fuel pressure leak down problem causing your hard start. If this video was helpful please help support my youtube channel by subscribing here: https://www.youtube.com/channel/UChCX…
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
What to do if no engine crank or no start?
Recommendations/Instructions: Take the following steps to check for damaged ground wire bondsif the symptoms for a concern are ”No Engine Crank” and/or ”No Communications” with Tech II. 1.Switch ignition key off. 2. Disconnect the TCM electrical connector and remove TCM from the vehicle. 3.
Who is the owner of the 2005 Chevy Silverado?
2005 Chevrolet Silverado Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the name SILVERADO are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.
Who is the owner of the 2005 Chevrolet Express?
2005 Chevrolet Express Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the name EXPRESS are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.
What are the most common Duramax 6.6L engine problems?
5 Most Common LBZ Duramax 6.6L Engine Problems. 1 1. LBZ Cracked Pistons. The LBZ is revered for its tune-only performance capabilities. With various upgrades, this engine is easily capable of 2 2. Duramax LBZ Water Pump Failure. 3 3. Glow Plug Failure – LBZ. 4 4. Allison 1000 Transmission Line Leaks. 5 5. Duramax EGR Problems.
What does no crank condition on Ford car mean?
A no crank condition means that the engine is not cranking when you turn the key to crank the engine. If your Ford vehicle is experiencing a no crank condition, you probably should start by checking the starter motor.
https://www.youtube.com/watch?v=Zy0RBGP_8hQ
Can a 6.6L Duramax crank no start?
Hi I could really use a tip if you could help. I am working on a 2006 6.6 duramax and can’t get it to run. Drove ina couple months ago but ran very poor like a missfire. then stopped running completly. Will start on starting fluid but then stalls when runs out of starting fluid.
What does it mean when your GMC Sierra won’t start?
The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your Sierra won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.
What causes a car to crank but not start?
One of the biggest issues that causes a vehicle to crank but not start is ignition issues. When there is no spark, the engine will not start. You’ll probably have a misfire related code such as P0300, P0301, etc…..
What to do if your truck wont start?
To avoid throwing guesses and parts at your truck, have the truck scanned for trouble codes as a first step. Some of the auto parts suppliers offer free code reading like Pepboys, Nappa, Advanced auto parts,etc and some of the guys are very knowledgeable and may have seen the issue often and put you on the right track.
What does no start no crank no click mean?
If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that. In the old days, power flowed through the ignition switch and down to the starter solenoid. Not anymore.
Why is my Pto not working on my truck?
Transmission malfunction affecting PTO operation. Contact Ford dealer to correct transmission problem. Engine does not advance to 1200 (diesel) or 1300 (gas) RPM when PTO is engaged. Improper connection to Ford SEIC wiring. Check wiring for proper connections. Ensure that wire connections are correct for truck model year.
What’s the difference between a C4500 and C5500?
Brakes are far superior, turns tighter, more interior room and I can legally haul my rock buggy on the flatbed AND pull the toyhauler with the bikes in it. That’s why I went with a 5500 instead of a 4500. That extra 2000 lbs. of rated capacity made the difference.
Can a PTO be connected to a SEIC?
Improper connections to Ford wiring. PTO wiring must interface with Ford Stationary Elevated Idle Control (SEIC). Check wiring for proper connections. Refer to PTO Installation and Owners Manual. Ensure that wire connections are correct for truck model year. Ensure that all connections are secure. Weak or improper ground.
What are the warning lights on a Chevrolet?
The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 50 of them so search carefully!
Why are the dashboard lights on my Chevy not working?
If the dashboard lights in your Chevy are dim, chances are you can fix it yourself. If it’s light out, make sure that the headlights aren’t turned on. Many headlights often dim the dash automatically when they’re switched on, so this might be the cause of the problem. If that’s not it, look for the dimmer switch.
Why are the lights on my car not working?
If it’s light out, make sure that the headlights aren’t turned on. Many headlights often dim the dash automatically when they’re switched on, so this might be the cause of the problem. If that’s not it, look for the dimmer switch.
What kind of engine does a GMC C5500 have?
2005 GMC C5500 24′ Flatbed Truck 8.1L V8 Gas Engine Allison Automatic Transmission 184,763 Miles 20,000 GVWR (No CDL Required) NEW Flatbed Body 24′ Lo… 2005 GMC C5500 24′ Flatbed Truck 8.1L V8 Gas Engine Allison Automatic Transmission 171,011 Miles 20,000 GVWR (No CDL Required) NEW Flatbed Body 24′ Lo…
Why does my Chevy Duramax not turn over?
Engine won’t turn over with key at all. Batteries are hot. You can take a power probe and shoot 12v to starter solenoid wire and it will crank and run fine. I traced that wire back to the fuse panel under the hood on the driver’s side. There is a CRANK fuse as well as a starter relay in that panel.
Why does my 2005 Chevy 2500 HD not start?
My 2005 Chevy 2500 HD won’t start. Engine won’t turn over with key at all. Batteries are hot. You can take a power probe and shoot 12v to starter solenoid wire and it will crank and run fine. I traced that wire back to the fuse panel under the hood on the driver’s side. There is a CRANK fuse as well as a starter relay in that panel.