Why are the lights on my Harley Davidson not working?
Discussion in ‘ Sportster Models ‘ started by CorkyShark, Apr 7, 2010 . I have a 1994 Custom XL1200C; the problem is the signals lights do not work. But the emergency lights do work. The bulbs are good. The switches work, because the emergency lights come on when I push both switches.
Where is the brake light switch on a Sportster?
This is the rear brake light switch. The front brake light switch is located in the right side handlebar switch housing. If neither switch works the brake light, odds are you have a short circuit in the wiring from the rear brake light switch to the rear brake light itself.
Why is my tail light not working on my Sportster?
You can’t post conmments that contain an email address. try starting with the bulb. brake light bulbs are dual fillament, meaning you have 2 bulbs in one basicly. if your brake side has blown then the tail light could still work.
What are the turnsignals on a Harley Davidson?
1) Turnsignals all stock means the front signal lights one of the two filaments in the front; the rear signal lights use single filiament lights.
Are there turn signals on a Harley Davidson Sportster?
Plus, we have Harley-Davidson Sportster front turn signals (and rear signals) in L.E.D or traditional bulbs. You can trust all our top manufacturers like Kuryakyn, J&P, Arlen Ness, Custom Dynamics, BikeMaster, New Rage Cycles, Accutronix, and more. Remember, we have all kinds of Harley-Davidson Sportster lights to keep your bike shining bright.
Discussion in ‘ Sportster Models ‘ started by CorkyShark, Apr 7, 2010 . I have a 1994 Custom XL1200C; the problem is the signals lights do not work. But the emergency lights do work. The bulbs are good. The switches work, because the emergency lights come on when I push both switches.
What does the brake light mean on a Harley Davidson?
What that means is the fronts have “running light filiament AND a signal filiament”, the backs have a single filiament that only has a single turnsignal filiament, with the brake light coming on when you hit the brakes.
Why is my left turn signal not working?
I have 2005 Road king Classic, the alarm light is coming while riding and the fob is not being touched to arm or disarm the alarm. The light comes on for the alarm and stays on while riding and at that time my right turn signal stops working, the left one still works fine.
Why does my badlander turn signal not flash?
Installed a badlander load equalizer 17 years ago for run and brake lights on the rear. If the bike is not moving the right turn signal functions correctly. If bike is moving, if you press the right turn signal, it will light up, but not flash. Looked in the service manual and this problem is not listed for troubleshooting the turn signals.
Why does my bike turn signal not flash?
If the bike is not moving the right turn signal functions correctly. If bike is moving, if you press the right turn signal, it will light up, but not flash. Looked in the service manual and this problem is not listed for troubleshooting the turn signals. Any suggestions? Hi, Mike. Would try the signal function without the Badlands module.
Why is my turn signal not flashing on my Fatboy?
Had the same problem on a 99 Fatboy changed the ignition switch and problem was solved Have a 97 FXDWG. Installed a badlander load equalizer 17 years ago for run and brake lights on the rear. If the bike is not moving the right turn signal functions correctly.
Why is my speedometer not working on my Sportster?
Electronic Speedometer: The electronic gauges fitted on 1995 and later Sportsters do not typically fail, but Harley has outlined a diagnostic procedure to confirm if the gauge is faulty or if the problem is elsewhere in the system. This procedure assumes that the wiring harness is securely plugged into the back of the gauge.
Are there any problems with my Harley Davidson Sportster?
Faulty Low Fuel Warning Light Some Harley Davidson Sportsters, mostly 2007 and 2008 are known to have a faulty low fuel warning light. Check with your dealer and you may be due a replacement under recall. Use your trip odometer to measure your true mileage and level of fuel consumption to see if it is accurate.
Installed a badlander load equalizer 17 years ago for run and brake lights on the rear. If the bike is not moving the right turn signal functions correctly. If bike is moving, if you press the right turn signal, it will light up, but not flash. Looked in the service manual and this problem is not listed for troubleshooting the turn signals.
Why are my turn signal lights not working?
(3) (If in fact you have filament type bulbs) Your lack of turn signal activity strongly suggests a faulty TSM. As fwcle, Jasyson459, Jack Klarich & NEWHD74FAN have already pointed out. The part finally came in and yes it was the TSM. Replaced it today and now my signal lights are working.
1) Turnsignals all stock means the front signal lights one of the two filaments in the front; the rear signal lights use single filiament lights.
What happens to the fuse on a Harley Davidson Sportster?
When a wire finds a path to ground that’s bypassing the device it’s powering, a shorter circuit is made. This generates heat and melts the metal strip inside the fuse. Without the right fuse (amp rating on top of the fuse), a fire can occur.
Where do you start on a Harley Davidson Sportster?
Always start at the fuse box when your Sportster experiences an electrical problem. This article applies to the Harley Davidson Sportster (2000-2015). Fuses, relays, and circuits breakers: they’re all circuit protection devices that can be found inside your Sportster’s fuse box, depending on its year.
What kind of lighting does a Harley Davidson use?
CorkyShark, welcome to HDTimeline and your first troubleshooting “exercise”. What others are trying to say is you need to determine if the turnsignal lighting is filament type (stock) or LED type (aftermarket).
Why is my turn signal not working when the headlights are on?
When the headlights are on-look at the turn signal in the dark. If there is a faint glow, you have a powered ground. Electricity—takes the path of least resistance. The turn signals on most older GM cars do not have a ground wire.
Why are my turn signal lights so slow?
Turn Lights Flash Too Fast or Slow. Changes in the flashing rate of the turn signal lights aren’t common and hard to notice as one of turn signal problems. In case this occurred after replacing the flasher or one of the light bulbs, you must have installed the wrong type of flasher or bulb for your vehicle model.
CorkyShark, welcome to HDTimeline and your first troubleshooting “exercise”. What others are trying to say is you need to determine if the turnsignal lighting is filament type (stock) or LED type (aftermarket).