Who made the oil pump?
In a valley in northwestern Pennsylvania in 1859, Edwin L. Drake drilled America’s first commercial oil well, launching the U.S. petroleum industry. For his oil well pump, Drake borrowed a common kitchen hand-pump to retrieve the important new resource from a depth of 69.5 feet.
Does a motorcycle have an oil pump?
This is the oil pump from a Honda CBR600RR. It sits under the engine with its foot down in the oil sump. A gerotor pump has end lobes on an interior rotor and end plus one on the exterior rotor. …
When was the first hot oil pump made?
1918 Byron Jackson produces the first hot oil pumps for the petroleum industry. 1920 Viking builds its first domestic oil burner pump using a mechanical seal. 1921 Harry LaBour founds LaBour Pump Company.
How does the oil pump in an internal combustion engine work?
Gerotor type oil pump from a scooter engine. The oil pump in an internal combustion engine circulates engine oil under pressure to the rotating bearings, the sliding pistons and the camshaft of the engine. This lubricates the bearings, allows the use of higher-capacity fluid bearings and also assists in cooling the engine.
What kind of oil pump is used in a small engine?
Gear pumps trochoid pumps and vane pumps are all commonly used. Plunger pumps have been used in the past, but these are now only used rarely, for small engines. To avoid the need for priming, the pump is always mounted low-down, either submerged or around the level of the oil in the sump.
What kind of drive shaft does an oil pump use?
Placing the oil pump low-down uses a near-vertical drive shaft, driven by helical skew gears from the camshaft. Some engines, such as the Fiat twin cam engine of 1964, began as OHV engines with an oil pump driven from a conventional camshaft in the cylinder block.
What does oil do to a motorcycle engine?
First, obviously, oil acts as a lubricant. If your engine is operating correctly, there is almost no metal to metal contact – everything is riding on a thin film of oil. However, oil has several other important jobs to do. Oil circulates throughout your engine, and cools parts that cannot get near a water jacket.
What kind of oil pump does an internal combustion engine use?
Gerotor type oil pump from a scooter engine. The oil pump in an internal combustion engine circulates engine oil under pressure to the rotating bearings, the sliding pistons and the camshaft of the engine.
Placing the oil pump low-down uses a near-vertical drive shaft, driven by helical skew gears from the camshaft. Some engines, such as the Fiat twin cam engine of 1964, began as OHV engines with an oil pump driven from a conventional camshaft in the cylinder block.
How does an oil pump work in a turbocharged engine?
Some ‘ turbo timer ‘ electric auxiliary oil pumps are sometimes fitted to turbocharged engines. These are a second oil pump that continues to run after the engine has stopped, providing cooling oil to the hot bearings of a turbocharger for some minutes, whilst it cools down.