Where is the jack on a Nissan Micra?
loosen rear wheel nuts. jack up via the middle of beam axle. rest rear axle on stands. remove rear wheels….pollyp
- preferably jack up only the front or rear end of the car at a time with the other end touching ground,
- handbrake on and in-gear,
Does the Nissan Micra have a spare wheel?
There’s a large well underneath the luggage compartment which is big enough to take a full-size or emergency spare wheel, although these are cost options (a can of spray gunk is standard).
How big are the wheels on a Nissan Micra?
Nissan Micra 16 inch Vegas Silver Wheel Trims (1992-2003) (Fits: Nissan Micra) Enhance the exterrior appearance of your vehicle in the most cost effective way possible with these sporty wheel trims. Therefore the size of that wheel above is 14″.
What to do in case of a flat tire in a Nissan Micra?
Place suitable blocks at both the front and back of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up. WARNING Be sure to block the wheel as the vehicle may move and result in personal injury. Open the rear hatch. Lift the floorboard. Remove the jacking tools from the storage location.
Where to find shock absorber lower nut on Micra?
That should be in the service manual: You can search for one using Google and this in the search box: “2009 k12 nissan micra service manual” without the quotes, it should show a lot of different sources for one. Before servicing the vehicle, refer to the Precautions Section. Shock absorber lower nut.
How to remove inner race from DS3 wheel?
Using tool 09432-11000 (or suitable puller), remove inner race from axle hub. Apply thin coat of grease to bearing contact surface and hub. Using and appropriate tool, press bearing into hub. CAUTION Do not press against outer race of wheel bearing.
Place suitable blocks at both the front and back of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up. WARNING Be sure to block the wheel as the vehicle may move and result in personal injury. Open the rear hatch. Lift the floorboard. Remove the jacking tools from the storage location.
How big is the nut on a Nissan Micra?
Torque the nut to 85 ft. lbs. (115 Nm) for 2002-04 models; 129 ft. lbs. (175 Nm). Upper ball joint. Torque the nut to 76 ft. lbs. (103 Nm). Lower ball joint. Torque the nut to 76 ft. lbs. (103 Nm). Align the steering knuckle cam and torque the bolt to 85 ft. lbs. (115 Nm). Brake line to the wheel cylinder.
That should be in the service manual: You can search for one using Google and this in the search box: “2009 k12 nissan micra service manual” without the quotes, it should show a lot of different sources for one. Before servicing the vehicle, refer to the Precautions Section. Shock absorber lower nut.
Using tool 09432-11000 (or suitable puller), remove inner race from axle hub. Apply thin coat of grease to bearing contact surface and hub. Using and appropriate tool, press bearing into hub. CAUTION Do not press against outer race of wheel bearing.