Where are the speakers on a Jeep Grand Cherokee?
The dash speakers can be found at the base of the windshield. (Crutchfield Research Photo) The dash speakers are 2-1/2″ diameter tweeters. Since this is an odd size and there isn’t a lot of space to work with, your best option for replacement is to install aftermarket tweeters.
How do you install a tweeter on a dash?
Install the tweeter in the dash for an easy bottom mount installation. In a bottom mount installation, the tweeter is placed underneath an existing speaker grille, meaning you don’t need to drill any new holes to install it. Simply use a wrench to screw the tweeter into the factory-installed holes underneath the grille.
How to disassemble a Jeep Grand Cherokee dashboard?
Remove the final retainer bolt positioned on top of the brake pedal in a similar fashion.Slide the dash towards you and disconnect the electrical connectors going into the back side of the dash. Drag the dash up and carry it out of your Jeep. “Jeep Grand Cherokee 1993 thru 2004: All Models; Haynes Repair Manual”; John Haynes; 2004
How do you remove radio from Jeep Cherokee?
Identify the two retainer screws for the radio panel. There is one screw on each side of the radio. Remove these screws with the Phillip’s head screwdriver and slide the panel forward. Unplug the radio’s electrical connectors. Drag the heater control assembly forward.
The dash speakers can be found at the base of the windshield. (Crutchfield Research Photo) The dash speakers are 2-1/2″ diameter tweeters. Since this is an odd size and there isn’t a lot of space to work with, your best option for replacement is to install aftermarket tweeters.
How tall is the stereo in a Jeep Grand Cherokee?
Replacing the stereo in your Grand Cherokee is a pretty simple process. Unfortunately, double-DIN (4″ tall) stereos won’t fit in your Jeep without modification, but you can choose nearly any single-DIN (2″ tall) receiver, thanks to a dash that’s almost seven inches deep.
How do you change the stereo in a jeep?
Put the key into the driver’s door and turn it to lock, then unlock the door. This will disarm the system and make the lights stop flashing. It’s relatively easy to retain your Jeep’s steering wheel audio controls when you install a new stereo.
Replacing the stereo in your Grand Cherokee is a pretty simple process. Unfortunately, double-DIN (4″ tall) stereos won’t fit in your Jeep without modification, but you can choose nearly any single-DIN (2″ tall) receiver, thanks to a dash that’s almost seven inches deep.
Put the key into the driver’s door and turn it to lock, then unlock the door. This will disarm the system and make the lights stop flashing. It’s relatively easy to retain your Jeep’s steering wheel audio controls when you install a new stereo.