What oil does a Honda Big Red take?
3 Quarts of Honda GN4 10W-40 4-Stroke Motorcylce Oil.
What type of oil do I use on a 83 Honda 185s?
How to change the oil on a 1983 honda atv/atc 185s 3 wheeler/three wheeler, the kind of oil and type I used was GN4 10W-40 4-stroke motorcycle oil.
What kind of oil do you put in a 3 wheeler?
Recommended – SAE 10w-40 (SE or SF).
How much oil does a Honda ATC 70 take?
ATC70 Technical Data
| Production Years : | 1973-1974, 1978-1985 |
|---|---|
| Oil Capacity : | 1 QT |
| Carburetion : | ??mm |
| Starting system : | Recoil Starter |
| Fuel capacity : | 0.55Gal, 0.11Gal Res. |
How many DEG’s does a Honda Big Red ATC 200E have?
1.16 Quarts (normal oil change) Lubrication System: Forced pressure and wet sump Intake valve: OPENS 5 deg. BTDC @ 1 mm lift CLOSES 35 deg. ABDC @ 1mm lift Exhaust valve: OPENS 35 deg. BBDC @ 1mm lift CLOSES 5 deg. ATDC @ 1mm lift Valve Clearance: Intake 0.05mm (0.002 in)
When did the Honda Big Red 200E come out?
The 1982-1983 first generation BIG REDS had the model designation 200E. The “E” stood for electric start. The 1982 model was the first BIG RED and was the first Honda ATC (all terrain cycle) to be designed specifically as a utility machine.
What kind of oil to use on a Honda ATV?
The Honda GN4 oil is the stock oil recommended for the application.. At about $20/gal it’s the same price as most of the major brand ATV oil. Why not avoid the guessing and go that way..??
Where is the engine serial number on a Honda Big Red?
Engine dry weight: 38.6 KG (85.0 lbs) Engine Serial Number : located on lower left crankcase. JH3TB055*EC300001 and up Note: information obtained from factory service manual.
What’s the difference between a Honda 200E in 1982 and 1983?
There are a few differences between the two 200E models that Honda made in 1982 and 1983. This may not be a complete list as I am using Honda literature and Honda 200E atc’s that I have owned for sources of information.
What’s the difference between the 1982 and 1983 Honda Big Reds?
This may have been a design change trying to keep the exhaust from melting the plastic tool box. Both of the 1982 and 1983 200E BIG REDS were chain drive and did not have reverse which make them less desirable as compared to the later model BIG REDS. If you know of more differences or have corrections please let me know.
What kind of power supply did the Honda Big Red 200E have?
The 12 Volt DC power supply had a maximum rating of 60 Watts (5 amps). Chain covers– I found one additional access port on the 1983 chain cover. This access port was added to allow the chain to be lubed easier.
What was the DC power supply on a 1983 Honda Big Red?
DC accessory power outlet – 1983 was the first year the BIG RED got an auxiliary power outlet that could be used to power tools and lights that were offered by Honda. The 12 Volt DC power supply had a maximum rating of 60 Watts (5 amps).