What kind of oil does a Yamaha Grizzly use?
Refill the oil tank with Yamalube 10W-40 oil using the specifications provided by Yamaha, which is 2.2 quarts of oil. PRO TIP: Add 2 quarts of oil first, then let your machine run for a minute with the dipstick on to circulate the oil. Next, shut your machine off and let it sit for 10 minutes.
How do you change oil on a Yamaha Grizzly?
The bolt is #25 on our Yamaha Grizzly drive shaft diagram. Get a drain pan underneath it and remove it with a 6mm Allen. This bolt also has a gasket. Once again, the presence of a milky fluid indicates water intrusion. Step 3. Replace the drain bolt and gasket once it’s drained. The torque is 7 foot-pounds. Step 4.
What are the specs of a Yamaha Grizzly 350?
The Yamaha Grizzly 350 went out in the market when its almost-big-bore sibling, the Grizzly 660, was undergoing enhancements and transitioning from a 660- to a 700-displacement power quad. Just like the Grizzly 660, this mid-size 4×4 boasted superb ergonomics, a three-position On-Command 4WD system, and fully-locked differentials.
How often should I Change my Grizzly differential oil?
A rule of thumb is to change these fluids every time you do your regular your oil changes so that it’s easy to keep track. Changing the drive gear fluids on your Grizzly can save you a ton of drivetrain woes. Here’s how to do this simple maintenance task for your Yamaha ATV. Step 1. Locate the 21mm fill nut near the top of the front differential.
Where is the fill nut on a Yamaha Grizzly?
Changing the drive gear fluids on your Grizzly can save you a ton of drivetrain woes. Here’s how to do this simple maintenance task for your Yamaha ATV. Step 1. Locate the 21mm fill nut near the top of the front differential. It’s #23 in our Yamaha Grizzly YFM700 front differential diagram.
How to start a Yamaha Grizzly 350 engine?
EBU18060 EBU18100 Handlebar switches Start switch “ ” Push this switch to crank the engine with the start- ECB00050 CAUTION: See the starting instructions on page 6-1 prior to starting the engine. EBU18151 Light switch “ /OFF” Set this switch to “ ”… Check the operation of the throttle lever be- fore you start the engine.
How to change the engine oil on a Yamaha 350 Wolverine?
In this video, I go through the process step by step of changing the engine oil on a Yamaha Wolverine 350 2WD, for this you need 3 qt. or liters of atv/powersport oil, and the correct oil filter. Loading…
Is there a speed limiter on a Yamaha Grizzly 350?
Check the operation of the throttle lever be- fore you start the engine. If it does not work smoothly, check for the cause. Correct the problem before riding the ATV. Consult a Yamaha dealer if you can’t find or solve the problem yourself. EBU18311 Speed limiter Your ATV was delivered with an adjustable speed 1.
How big is the fuel tank on a Yamaha Grizzly 350?
Fuel tank cap UNLEADED GASOLINE ONLY Fuel tank capacity: EBU18730 13.5 L (3.57 US gal) (2.97 Imp.gal) Fuel Fuel reserve amount: Make sure that there is sufficient fuel in the tank. HOW TO AVOID THE HAZARD Your Yamaha engine has been designed to use Do not overfill the fuel tank.