What kind of oil does a 2002 Toyota Tundra use?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (All TEMPS) |
|---|---|
| Capacity: | 6.6 quarts (with filter)After refill check oil level. |
| Torque: | 29 ft/lbs (Oil Drain Plug) |
How do you reset the oil light on a 2002 Toyota Tundra?
So let’s do it.
- Get in the car and turn it on without starting it.
- Make sure you’re on the TRIP A.
- Next, turn off the ignition.
- Press and hold the ODO/TRIP button while turn on the ignition key.
- Continue to hold down the ODO/TRIP button.
- Now you can turn it off and then start the engine to confirm that everything is done.
What type of oil does a 2003 Toyota Tundra take?
Both engine models will need to use 5W-30 synthetic blend oil. The capacity for the V6 model will be 5.5 US quarts while the V8 model will have a capacity of 6.6 US quarts.
How do you change oil on tundra?
The first step on a Toyota Tundra 5.7 oil change is to remove the skid plate. This will give you access to the oil pan and oil filter locations. Draining the oil pan is pretty straight forward. The oil pan is relatively small for the size of the motor.
How do you change the oil filter on a Toyota Tundra?
The oil filter can be replaced from under the hood in the Toyota Tundra. Use your oil filter wrench to remove it, then install the new one in place. Rub some oil on the new filter’s gasket so it doesn’t dry.
What is the recommended oil for Toyota Tundra?
If you’re running an older vehicle or one with high mileage and engine wear, you may wish to use 5W30 or even 10W30 engine oil in your Toyota Tundra. Check the transmission dipstick for the recommended type of transmission fluid in your Toyota Tundra. Most Tundras should use DEXRON -III transmission fluid.