What kind of material is G10?
G10/FR-4 is a composite material that consists of glass fabric, electrical grade epoxy resin. The material is extremely strong and stiff, has a low coefficient of thermal expansion, and outstanding electrical properties. G10/FR-4 is widely used as an insulator for electrical and electronic applications.
Is G10 chemical resistant?
G10/FR4 offers excellent chemical resistance, flame ratings and electrical properties under both dry and humid conditions. It also features high flexural, impact, mechanical and bond strength at temperatures up to 266°F (130°C).
What is the difference between G10 and FR4?
The main difference between NEMA Grades G10 and FR4 is that FR4 is a fire retardant grade of G10. Therefore, FR4 may be substituted where G10 is called out except in applications where halogens are not desired. G10 can never be substituted where FR4 is called for.
How is G10 material made?
G-10 is a high-pressure fiberglass laminate, a type of composite material. It is created by stacking multiple layers of glass cloth, soaked in epoxy resin, and by compressing the resulting material under heat until the epoxy cures. It is manufactured in flat sheets, most often a few millimeters thick.
How strong is G10 material?
According to Accurate Plastics technical data for G10, the tensile strength of G10 measures in at 40,000+ PSI lengthwise and at 35,000+ PSI crosswise. Compression strength yields 60,000+ PSI flatwise and 35,000+ PSI edgewise.
What is G10 fiberglass?
What is G10 Rod?
G10 is a moulded rod manufactured from high quality woven E glass fabric which is bonded with an epoxy resin. Rods are available moulded, ground or machined to size required in diameters of up to 100mm. We recommend a selection of rod size that is slightly larger diameter than the required finish size I.e. 10% larger.
What is G10 board?
G10 fiberglass boards are made of a special glass epoxy laminate that has extremely high strength. G10 fiberglass is used in marine applications due to its superior strength, moisture resistance, and excellent electrical and fire insulation. G10 boards are sold in 1/4 and 1/2 inch thickness.
Is G10 a good material?
G10 is a very durable composite material that comes in a variety of sizes and bold vibrant colors and color combinations. It is made with glass fiber and epoxy which is compressed under extremely high pressure and heat cured to provide an extremely tough and durable material.
Does G10 melt?
Built from durable fiberglass and epoxy resin, and formed under high temperature and pressure, G-10 is unlike other polymers — it will not melt. G-10 is also resistant to temperature and is extremely lightweight.
How is G-10 rod made?
What kind of composite material is G10 / FR-4?
G10/FR-4 is a composite material that consists of glass fabric, electrical grade epoxy resin.
What is the thermal conductivity of g-10cr resin?
G-10CR resin 1.18 G-11CR resin 1.228 Source: (J. G. Hust, Thermal conductivity of G-10CR and G-11CR industrial laminates and their component parts at low temperatures) 2. Thermal conductivity from 2 K to 300 K Figure.
What is G10 glass epoxy composite laminate material?
What Is G10 Material. G-10 FR-4 is a thermosetting industrial fibre glass composite laminate consisting of a continuous filament glass cloth material with an epoxy resin binder. This product, first introduced in the 1950’s, has characteristics of high strength, low moisture absorption, excellent electrical properties and chemical resistance.
What is the temperature of G10 Fiberglass sheet?
Another variation of G10 fiberglass sheet is G10 CR laminate used in cryogenic applications. Both G-10 and FR-4 are rated at 285 degree F continuous operating temperature. Because they are thermosets, no melting will occur with these grades, however charring will be observed after extended periods above this temperature rating.