What is the gear ratio of a Ford?
Ford developed based on solid axle that’s popular as gear for the car in that time. After this technology was released, almost many Ford models rely on this gear. The ratio consists of several numbers between 2.73 and 6.00 that you see on chart.
What are the rear end gears fuel economy?
Rear End Gears Fuel Economy. This is the ratio of gears in the rearend (differential) that you may have heard of in the numerical terms 2.73 to one, 3.23 to one, 3.55 to one, 3.73 to one, and 4.10 to one (commonly written in the following manner 3.23:1 with a colon). These numbers specifically relate the ratio of the speed at which…
How can I tell what rear end ratio I have?
The Axle Ratio is stamped on a Gear Ratio Tag on the axle cover. The stamped numbers on the left or right axle tube can also identify the axle. Chrysler Dodge differential gasket patterns can help you indentiy what rear end you have. 2000 – 2002 Front Axle Model Designation changes.
How is tire size and differential gear ratio related?
The following chart of Tire sizes and axle gear ratios are meant to give a general idea of the relationship between the differential gear ratio and the tire size and what effect the ratio has on power output and fuel economy.
How do you calculate rear end ratio?
Step 1 How to Calculate Your Rear End Ratio. Here is the formula to calculate rear end ratio: =(60*RPM)/(Tire Size*Xmission Final Ratio*Road Speed) Here’s what you need to know: Your Tire size in a number represented as “revolutions per mile”.
How to find out your gear ratio on a Ford Mustang?
- Step 1. Measure the diameter of either rear tire with a measuring tape. Record the diameter in inches.
- Step 2.
- Step 3.
- Step 4.
What is rear differential gear ratio?
The rear axle gear ratio is the number of turns that the input of the differential at the driveshaft makes in relation to its output at the rear wheels. Different gear ratios can have different effects in the way a vehicle performs.
How do you determine axle gear ratio?
- Slide a floor jack under the rear of the vehicle and raise it until the rear wheels are off the ground.
- Crawl under the vehicle and locate the drive shaft where it attaches to the front of the rear axle.
- Place a piece of masking tape on the edge of one of the rear tires.