What does the p0012 code on an engine mean?

What the P0012 code means. P0012 is the OBD-II generic code indicating the engine control module (ECM) has determined that the intake camshaft timing for bank 1 is more retarded than what the ECM has commanded it be.

Where do I find the fault code on my Hyundai?

Connect your OBD-II scanner into the OBD-2 port under the dashboard on the driver’s side. Note: Even a $20 generic OBD-2 scanner can retrieve check engine / ECU Hyundai fault codes. Those are P-codes in the Hyundai list below.

What is the fault code for the Hyundai Elantra?

Hyundai Sonata, Excel 90 on , Scoupe 91 & 92 , Elantra. Hyundai Scoupe 93 through 95 and Accent vehicles. 4155 ECM failure A/C relay, IAC, PC.” You will need a Hyundai multi-system OBD-2 scanner to read Hyundai specific fault codes.

What to do if your check engine light says p0022?

Check to see if there are any other codes along with P0022 and clear your Check Engine Light with FIXD. Check the engine oil level and condition. If it’s low, adjust to spec and test drive to see if the concern is resolved. If it’s dirty, change the oil and filter and test drive to see if the concern is resolved.

What are the symptoms of the p0012 code?

What are the symptoms of the P0012 code? 1 The ECM will turn on the Check Engine Light if the timing cannot be commanded to move. 2 The engine will have a hard start condition due to the retarded timing position. 3 Fuel mileage may go down since the camshaft is not in a position to get the best possible fuel mileage.

What causes the variable camshaft timing code p0012?

This over-retarded timing condition could be during the advancing or retarding phase of the camshaft timing. What causes the P0012 code? The variable camshaft timing (VCT) oil control valve (OCV) stuck in the open position.

What does c1201 engine control system malfunction mean?

The C1201 code means that there is problem with the engine. You should try fixing the P0456 code first, clear all the codes and check again. Do you have any other symptoms? Read more: https://www.autocodes.com/p… Hi, I have Toyota auris 2009..there is only one code c1201. What does this mean?

How to fix check engine light p0012-camshaft position a?

How To Fix Check Engine Light P0012 – Camshaft Position A – Timing Over Retarded (Bank 1) – YouTube A check engine light and low oil pressure light can trigger this code. A check engine light and low oil pressure light can trigger this code. Skip navigation Sign in Search Loading… Close This video is unavailable.

How much does it cost to repair a c1201 Toyota engine?

If the C1201 is combined with an Oxygen (O2) Sensor code, repair the O2 sensor code first and clear the codes. What does this mean? The cost of diagnosing the C1201 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type.

Why does my Ford Escape have a p0012?

With P0012, the camshaft actuator is leaving the timing retarded. Camshaft Position Actuators change the lift of the camshaft up to 25 degrees. They are hydraulic, which means that they use the vehicle’s engine oil to control lift. So, if you have low oil pressure or dirty oil, it can keep them from doing their job properly, and trigger P0012.

What is the meaning of the code p0016?

Code P0016 Definition The correlation of the camshaft and crankshaft positions on bank 1 is incorrect based on the intake camshaft position sensor. What Does P0016 Mean? In order for the engine to run smoothly and efficiently, it has to know exactly where the camshaft and crankshaft is in its rotation.

Where is the p0016 sensor located on a PCM?

Should the timing be off, the PCM will set a code P0016. This code stands for Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor A). Where is the P0016 sensor located?

What causes a crankshaft to be in p0016 position?

To sum things up, the common causes for code P0016 are as follows: 1 A faulty cam or crank sensor 2 The cam or crank circuit is open or shorted 3 The timing belt/chain is out of time 4 The cam or crank tone ring is slipped/broken 5 A problem in the VVT system 6 The PCM is faulty

What does the OBD code p0016 mean?

P0016 code definition Camshaft Position A – Camshaft Position Correlation (Bank 1) What the P0016 code means P0016 is the OBD-II generic code indicating that the camshaft position sensor for bank 1 does not correlate to the signal from the crankshaft position sensor.

Should the timing be off, the PCM will set a code P0016. This code stands for Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor A). Where is the P0016 sensor located?

Is there a repair cost estimate for p0016?

Due to the high number of possible causes of code P0016, as well as the wide range of current prices of replacement parts for every possible part that can fail and set this code as a result, it is not possible to provide a repair cost estimate for this code that is even reasonably accurate for any part of the USA.

What do you need to know about a Mazda CX 7 p0012?

If the engine is showing signs of sludge, and the actuator solenoid had to be cleaned, then you are probably facing having to replace the camshaft actuator, the timing chain and guides and the cam bearing journals need to be inspected for wear.

What is the cel code for a Mazda CX7?

I have a 2009 CX7 with 95,000 KLMs. It runs great and I am quite happy with it. However, I am getting an intermittent CEL with a code of P0012. I know that is the variable valve timing actuator. The CEL comes on once a week or so for a day and then resets itself.

What is the OBD2 code for a Mazda p0012?

OBD2 Code P0012 Mazda definition: A code P0012 Mazda definition:the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car’s PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0012 Mazda DTC specifically definition:the camshaft (cam) timing.

What happens if you have low oil pressure in your car?

The only way you can ensure that your engine stays protected is by having the right motor oil pressure. If you have low oil pressure, it can undermine your engine’s performance and possibly cause damage to its components. In short, it can spell serious motor trouble in the long run.

Why does my blood pressure drop when I stop the oil pump?

While the oil pump is not a human heart, its function is quite similar to that. Hence, when it gets damaged, you can expect the pressure within the oil passages of the engine to drop, too. Stop the heart and you also lose blood pressure or you have a drop in blood pressure. There are many causes of oil pump failure.

What causes a p0456 code on a gas tank?

What Causes the P0456 Code? 1 There might be a leak in the hoses leading to or from the fuel tank. 2 The hoses of the EVAP system might be broken or cracked. 3 There might be a leak in the purge valve or the vent valve. 4 The EVAP canister might be leaking. 5 The gas cap vent might not fit properly so it doesn’t seal.

What does the p0606 fault code on a car mean?

What is the P0606 Fault Code? The P0606 fault code means that there’s an error with your power control module (PCM). Your PCM is the computer inside your car that monitors all the vital systems. Basically, it’s the brain of your car.

How long does it take to diagnose a p0456 code?

Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P0456 code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.

How to diagnose EVAP control system leak p0456?

Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P0456 code is 1.0 hour of labor.

What causes the ECM to trigger a p0012 fault?

Here are a few things which could cause the ECM to trigger a P0012 fault: Contaminate engine oil (rare fault). Inadequate oil flow to the variable camshaft timing (VCT) oil control valve (OCV). Defective VCT oil control valve (OCV). Control valve more than likely stuck in open position. Defective camshaft phaser.

What can cause a p0012 BMW to stall?

P0012 BMW Possible Causes 1 Low or Dirty Engine Oil 2 Faulty VANOS solenoid 3 Faulty Camshaft Position Sensor 4 Mechanical timing condition More …

What does the p0012 code on an ECM mean?

The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. The P0012 code is set when the ECM detects the camshaft timing for the intake camshaft on bank 1 is more retarded than what it has been set to be. What Are The Symptoms Of Code P0012?

P0012 BMW Possible Causes 1 Low or Dirty Engine Oil 2 Faulty VANOS solenoid 3 Faulty Camshaft Position Sensor 4 Mechanical timing condition More

How much does it cost to repair a p0012 BMW?

The cost of diagnosing the P0012 BMW code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

What is the diagnostic code for camshaft position a-timing?

Cost of diagnosing the P0012 code. P0012 is a diagnostic trouble code (DTC) for “Camshaft Position A – Timing Over-Retarded (Bank 1)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.

How to check Bank 1 intake camshaft timing?

Replacing the camshaft oil control valve for bank 1 intake camshaft. Check the timing chain alignment for jumped timing problems and repair as needed. The camshaft phaser controls the timing advance and retard function through oil pressure and oil. The oil needs to be the proper viscosity for the camshaft timing control to work as designed.

What does variable valve timing do to the camshaft?

With Variable Valve Timing (which is very common on today’s engines) camshaft timing can be altered dynamically while the engine is under load. This strategy is used to enhance fuel economy, increase power, and reduce tailpipe emissions. The camshaft angle is only adjustable on engines equipped with variable valve timing (VVT).

What does the ECM do on a Toyota p0012?

P0012 Toyota Description The Engine Control Module (ECM) controls the Oil Control Valve (OCV) to regulate the intake camshaft angle. As a result of the angle change, the engine timing is advance or retard.

How much does it cost to repair a p0012 Toyota engine?

The cost of diagnosing the P0012 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Navigation