What does the Ford p1151 trouble code mean?
This particular DTC article refers to a P1151 trouble code on Ford vehicles. This does not apply to other makes of vehicles. A Heated Exhaust Oxygen (HO2S) sensor indicating lean at the end of a test is trying to correct for an over-rich condition.
What is the OBD 2 fault code P1150?
OBD II fault code P1150 is a manufacturer specific code that is defined by carmaker Toyota and by extension, Lexus, as “Air/Fuel Ratio Sensor Circuit Range/Performance Malfunction Bank 2 Sensor 1.
What does lack of ho2s-21 sensor code mean?
The test fails when the fuel control system no longer detects switching for a calibrated amount of time. You will likely not notice any drivability problems. A code P1151 may mean that one or more of the following has happened: Corrosion or poor mating terminals and wiring Improperly seated engine oil dipstick
What do you need to know about Toyota P1150?
In light of the above, it is vitally important that when code P1150 is present on any Toyota/Lexus application, that all fault codes and available freeze frame data be recorded, and that all codes are researched and resolved in the order in which they were stored.
This particular DTC article refers to a P1151 trouble code on Ford vehicles. This does not apply to other makes of vehicles. A Heated Exhaust Oxygen (HO2S) sensor indicating lean at the end of a test is trying to correct for an over-rich condition.
What causes a ho2s reading of p1151?
Any other these would result in an incorrect HO2S reading and trouble code P1151. The next system to check is your fuel system. Leaking fuel injectors, low fuel, or too much fuel pressure could all result in this trouble code.
The test fails when the fuel control system no longer detects switching for a calibrated amount of time. You will likely not notice any drivability problems. A code P1151 may mean that one or more of the following has happened: Corrosion or poor mating terminals and wiring Improperly seated engine oil dipstick
What does the OBD code p0125 stand for?
P0125 is the OBD-II generic code for the engine computer, or Engine Control Module (ECM), not detecting enough heat in the cooling system before the fuel management system can take control. The ECM has a predetermined value after you start your vehicle to expect a certain coolant temperature.