What does it mean when your odometer says no start?
Error on the odometer usually means a miscommunication between the PCM (and sometimes BCM). In my case, I had to get a new PCM. Your first order is to get the battery functional though. Well, we got a new battery as the old one was shot. However, it did not solve the problem. Still nothing and swinging needles and error on odometer.
Do you have to reset the odometer when you change an engine?
In case, you opt for manually resetting the odometer; you would have to face legal charges. This is because the engine change status needs to be documented and the mileage change should be calculated and presented. If none of that happens, you would have to bear the dire consequences that follow.
Why is odometer tampering a big problem?
Odometer tampering is a huge problem when buying a used car and the reason is simple, lower mileage used cars sell better, and they’re worth more money. So what can you do as a consumer to protect yourself from odometer mileage tampering?
Do you have to put an odometer replacement sticker on your car?
If a digital odometer is replaced legally, the mileage doesn’t have to be synced onto the new odometer, but the shop or garage doing the work will have to install an odometer replacement sticker somewhere very noticeable in the vehicle.
How can I tell if my odometer has been replaced?
Step 3: Check for an odometer replacement sticker. If the odometer was faulty and replaced at some point in the vehicle’s history, it is legally required that the odometer reading be recorded on a decal that is displayed on the vehicle.
What to do when your odometer has zero miles on it?
When a shop/garage has to replace a digital odometer, the replacement odometer sent from the factory has zero mileage on it, so the odometer needs to be sent out to a professional speedometer facility to have the mileage from the old odometer transferred onto the new odometer. The process is not complex, but it is time consuming.
Odometer tampering is a huge problem when buying a used car and the reason is simple, lower mileage used cars sell better, and they’re worth more money. So what can you do as a consumer to protect yourself from odometer mileage tampering?
Why did they change the odometer to digital?
On others, the speedometer cable was designed to count the miles up whether the cable was turned in the forward or reverse direction. And finally, odometers were almost completely changed to digital readouts, which were thought to be foolproof. With advances in technology, access to information is astounding.
What does a blinking odometer mean, if anything?
This can happen is a battery is low, or has been disconnected. It is what Fiat calls a Proxy Alignment. Basically, one of three modules (the radio being one) is not communicating. I disconnected the battery yesterday and drove the car about 200 miles today. It was flashing then stopped when I restarted the car.
What does a blinking odometer mean on a Fiat 500?
It means you are the first to get a Fiat 500 to that mileage and you’ve won a prize! In all seriousness, I have no idea – probably a software glitch.
Why does my Pontiac G6 say lost communication?
Borrowed a diagnostic tool from a friend and it showed the following… lost communication with engine control module/powertrain control module “A”. Also want to add that battery shows only 9 volts at terminals + neg. cable is a bit loose connecting to battery. Will a low battery cause this lost communication thing?
Error on the odometer usually means a miscommunication between the PCM (and sometimes BCM). In my case, I had to get a new PCM. Your first order is to get the battery functional though. Well, we got a new battery as the old one was shot. However, it did not solve the problem. Still nothing and swinging needles and error on odometer.
Why is my odometer blinking at 5, 400 miles?
Bringing back an old thread because this just happened to me. My odometer started blinking today at about 5,400 miles. No oil change message, no other lights/symbols. My car, stereo, and cluster are stock. No apparent reason for the blinking. I disconnected the negative battery terminal for a minute then re-connected.
Why does my odometer stop working on my Chevy?
If your odometer stops working in your Chevrolet, it may be due to a couple reasons. Depending upon the year and model of your vehicle, the fix may be something you can do or something you may need to take to your dealership for repair. If neither of these indicators is working, then the problem may lie within the speed sensor on your vehicle.
What happens when the fuel gauge goes to zero?
The fuel gage goes to empty. The speedometer either goes to zero or it just bounces up and down. The RPM gauge goes up and down. Low Fuel or Power Steering messages pop up where the tacomter display is. You can’t tell how fast you are going or how much gas you have and it jerks sometimes.
What to do if the OBD II scanner doesn’t communicate with the vehicle?
What to do if the OBD II scanner doesn’t communicate with the vehicle. TEST 1: Connect the positive DMM lead to DLC pin 4 and the negative DMM lead to the negative battery terminal, using jumper wires if necessary. Do not connect to the body or chassis ground but to the battery terminal directly.
What to do if your Toyota won’t start?
Battery – If the connections on your battery become corroded, there is no longer a connection to the rest of the car. This can keep you from starting. Clean the posts and try to start the car. Additionally, the battery may be dead. Take a battery tester and test the cranking amps to see if they are weak.
Why does my son’s 08 G6 not start?
My son’s 08 G6 will not start or even try to turn over. It shows error on odometer after all needles have swung on the cluster.I searched the forum for solutions and tried some to no avail.
My son’s 08 G6 will not start or even try to turn over. It shows error on odometer after all needles have swung on the cluster.I searched the forum for solutions and tried some to no avail.
What do you do when your car won’t start?
Owning a vehicle can be the highlight of a day and a nightmare all in one. The first time you drive the car off of the lot, you feel like a proud parent. But, those feelings can quickly turn sour the first time the car won’t start. If you find yourself wondering why your car won’t start, we’ve got some common causes to consider.
How can I tell if my car injectors are opening?
To check if the injectors are opening you can measure the voltage with a multimeter. The injectors usually do have two pins, one 12+ power and one ground signal to the engine control unit. Make sure you have 12 volts on one of the wires while cranking and you can check if you get any ground signal with a LED light.
What does the P0420 code on a check engine light mean?
When check engine lights are scanned, a p0420 code is a very common result. It’s actually a generic code, meaning it can be thrown from any vehicle after 1996. Commonly, people think the p0420 code indicates that the oxygen sensors need to be replaced, but that’s definitely not always the case.
How can I find the trouble code on my car?
Watch the “Check Engine” light for codes as documented previously. Turn the key to the “On” position while simultaneously depressing the odometer “Trip” and “Reset” buttons if your dash cluster is digital. The trouble codes read from the odometer display in this method.
What is the code for the Check Engine light?
The C1201 code is the one that tells the vehicle to turn on the check engine light and disable the traction and VSC. Basically, when the other two codes pop up, this one is in charge of letting you know there’s a problem.
Watch the “Check Engine” light for codes as documented previously. Turn the key to the “On” position while simultaneously depressing the odometer “Trip” and “Reset” buttons if your dash cluster is digital. The trouble codes read from the odometer display in this method.
How to record car trouble codes with no equipment?
Once the sequence has been initiated, the “Check Engine” light begins to flash. Each flash represents a number in a two-digit trouble code stored in the computer. A pause separates the first digit from the second digit. For instance, the code “23” flashes as follows: flash, flash, pause, flash, flash, flash. Record the codes as they flash.
What kind of trouble code does a 1995 car have?
Vehicles older than 1995 models typically feature the OBD-1 trouble-code system; cars made after 1995 usually have the OBD-2 system.
What causes no start on Pontiac G6 CYL?
A condition has been identified that could cause a NO crank/No communication on the LE5-4 cyl engine. This condition has been identified as a loose ground G105 behind the A/C compressor. Remove the bolt from G105 and clean the engine block surface. You should also make sure the terminal is tight after the bolt is tightened up.
What causes a Mercedes Benz to not start?
In most cases you will get a fault code related to one of the following: 1 ECM / PCM computer failure 2 Camshaft position sensor 3 Shifter Selector module 4 Fault codes related to driver authorization or immobilizer 5 Electrical problems
Why does the DTC u0001 not have a current status?
The DTC U0001 does not have a current status. A supervised periodic message that includes the transmitter module availability has not been received. The module uses a default value for the missing parameter.