What causes low oil level in Honda P3400?
P3400 HONDA Possible Causes 1 Low engine oil level 2 Faulty Rocker Arm Oil Control Solenoid 3 Faulty EOP (Engine Oil Pressure) sensor 4 Incorrect oil type used 5 Engine mechanical condition
What was the P3400 code on my Honda Odyssey?
My ’08 Ody had this P3400 code pop up at around 81k, (first problem ever), so I went to parts store where they pull the code for free, hit Google and found the above excellent post and service bulletin 11-033.
What does the PCM do on a Honda P3400?
The PCM monitors oil pressure in the hydraulic circuit of the VTEC mechanism using the front of rear rocker arm oil pressure switches downstream of the rocker arm oil control solenoids. Need more information on how to fix the P3400 HONDA code?
Where is the oil pressure switch on a Honda Odyssey?
Unplug the rear rocker arm oil pressure switch 1P connector for DTC P3400, or the front rocker arm oil pressure switch 1P connector for DTC P3497. Go to the PGM-FI Data List, and check the ROCKER ARM OIL PRESSURE SWITCH signal. • If the switch signal reads OFF, the wiring is OK. Replace the oil pressure switch. Then, plug in the connector
P3400 HONDA Possible Causes 1 Low engine oil level 2 Faulty Rocker Arm Oil Control Solenoid 3 Faulty EOP (Engine Oil Pressure) sensor 4 Incorrect oil type used 5 Engine mechanical condition
My ’08 Ody had this P3400 code pop up at around 81k, (first problem ever), so I went to parts store where they pull the code for free, hit Google and found the above excellent post and service bulletin 11-033.
Unplug the rear rocker arm oil pressure switch 1P connector for DTC P3400, or the front rocker arm oil pressure switch 1P connector for DTC P3497. Go to the PGM-FI Data List, and check the ROCKER ARM OIL PRESSURE SWITCH signal. • If the switch signal reads OFF, the wiring is OK. Replace the oil pressure switch. Then, plug in the connector
The PCM monitors oil pressure in the hydraulic circuit of the VTEC mechanism using the front of rear rocker arm oil pressure switches downstream of the rocker arm oil control solenoids. Need more information on how to fix the P3400 HONDA code?