Is wheel bearing and hub bearing the same?
Also called a wheel hub bearing, hub assembly, wheel hub unit or hub and bearing assembly, the wheel hub assembly is a crucial part of your steering system contributing to the safe steering and handling of your vehicle.
What are two types of hub bearings?
Most automotive wheel bearings are one of two basic designs: ball bearings or tapered roller bearings. Each type of bearing has pros and cons, depending on the application.
Which is the best bearings and hub assembly?
Wheel Bearing and Hub Assembly by MOOG®. If you hear a rumbling noise while driving and have excessive play when the wheel is rocked, you’re in need of new bearings. MOOG has hub assemblies with OE style bearings and superior seals to… Wheel Bearing and Hub Assembly by Timken®. Get optimum vehicle performance with Timken bearings.
Where are the bearings located in the wheel?
Usually located in the wheel’s hub, rotor, or brake drum, bearings help the wheel rotate smoothly when the vehicle moves. If you notice a humming or whirring noise while you are driving or your ABS light turns on, it may be time to change your bearings.
Can you replace a wheel bearing at Pep Boys?
On some cars, you can just replace the bearing and call it a day. On others, the hub assembly must be removed and replaced. The most difficult type involves removing the hub assembly and setting it in a press. If you’re not sure what type of wheel hub assembly you have, stop by or give your local Pep Boys store a call.
What is the function of an axle bearing?
Axle Bearing and Hub Assembly by GSP North America®. The main function of Auto hub is to bear the weight of vehicle and provide accurate direction for hub transmission. The hub is a very important safety part which will bear the axial… Wheel Seal by National®. Don’t just repair a leak, prevent future problems with a National Oil Seal.
Why is my wheel bearing hub axle nut torquing?
The torque specification for this center nut is critical to the performance and longevity of the hub. One of the leading causes of premature hub failure is improper torquing of the axle nut. Most drive axle hubs have a center nut that must be torqued down onto the axle shaft to a specific torque value.
What causes a wheel hub to back off?
Cause: Loss of bearing retention is the leading cause of hub bearing damage, resulting in wheel vibration and/or noise. The axle-retaining nut backs off when bearings demonstrate improper torque or have lost their self-retention features. This changes the setting of the bearings inside the hub, causing misalignment and accelerating wear.
How do you replace a rear wheel bearing?
For rear wheel bearing replacement, remove the spindle nut and the washer (fig. 2). Remove the lower ball joint retaining nut. Separate the suspension knuckle from the lower control arm ball joint stud. Lift the suspension knuckle up from the lower control arm (fig. 3). For rear wheel bearing replacement, remove axle from bearing.
What causes an axle retaining nut to back off?
The axle-retaining nut backs off when bearings demonstrate improper torque or have lost their self-retention features. This changes the setting of the bearings inside the hub, causing misalignment and accelerating wear. Solution: Always use a new axle retaining nut and tighten it to the proper torque to avoid a rough and worn surface under the nut.