Is the Yamaha Virago a good bike to buy?
It proved attractive to riders as it was easy to ride and offered decent performance. If you are looking for a trusty cruiser with laid-back behavior, the Virago is an attractive option. But you’re here because you’re wondering if these bikes have any common problems and, if so, how severe they are.
How big is the fuel tank on a Yamaha Virago?
The Yamaha Virago’s reputation as a trusty cruiser is sometimes hampered by its dismal fuel holding capacity, particularly for the Virago 535, a small 12-liter tank. Virago owners are often reluctant to take long-distance moto-trips on their Virago; the tank only lasts only about 100 miles.
Why does my Yamaha Virago keep losing power?
Once the bike is back in use, the sludge-clogged components interfere with the fuel’s bath, and the bike is “starved” of fuel. This causes the motorcycle to sputter and jerk while riding. If the fuel supply has been restricted severely, the bike may lose power completely. Another hidden culprit of poor performance on a Virago is rust.
What happens if the rectifier on a virago goes bad?
The rectifier/regulator is the part responsible for maintaining a suitable current. A bad rectifier can destroy the battery. Signs of failed regulator/rectifier include engine sputtering, rough idling, or loss of acceleration power. The regulator controls the battery’s voltage and keeps its power output within limits.
Where can I find specifications for a virago?
The following specifications were assembled as a courtesy to our fellow Virago riders. If you have others to offer, please email us or post in the forums. Thanks!
What kind of oil does a Yamaha Virago use?
Virago Specifications Engine oil XV-920 (1981-1982 CHAIN DRIVE) 8.9 oz (264 cc) XV-920 (1981-1982 SHAFTDRIVE) 10.2 oz (303 cc) XV-1000, XV-1100 12.6 oz (372 cc) Final Gear Oil (SHAFT DRIVE) .21 qts (200 cc)
What are the symptoms of a faulty Yamaha Virago starter?
Symptoms of a faulty electrical starter on the Yamaha Virago motorcycle include: Typically, the engine should come to life immediately on pressing the starter. However, if the starter turns slowly and the bike cannot start promptly, something is wrong with the starter. II. Starter Makes a Clicking Noise:
What are the specs for a Yamaha Virago?
Virago Specifications Ignition Timing Fixed Valve Clearance (cold) 1981-1983 Intake 0.004in. (0.10 mm) Exhaust 0.006 in. (0.15 mm) Valve Clearance (cold) 1984-on
How many bars are in a virago XV1000 chain drive?
TR1 (XV1000 chain drive) models Front Up to 90 kg (198 lbs) load . 1.79 Bars (26 psi) 90 to 201 kg (198 to 443 lbs) load 1.93 Bars (28 psi) High speed riding 1.93 Bars (28 psi) Rear Up to 90 kg (198 lbs) . 1.93 Bars (28 psi) 90 to 201 kg (198 to 443 lbs) 2.20 bars (32 psi) High speed riding 2.20 Bars (32 psi)
What kind of brake fluid does a virago use?
It has a distinct color bluish-purplish color. http://www.clearcoproducts. com/dot5-brake-fluid.html The chart makes it look as though it can be mixed “DOT 3 or DOT 4 or DOT 5”. If Dot 5 is to be used, the whole braking system will have to be purged of all of the glycol-based fluids and Vice Versa. *NOTE*Also, Fuel Octane is 87 not 89 – unleaded.
What kind of fuel octane does a virago use?
If Dot 5 is to be used, the whole braking system will have to be purged of all of the glycol-based fluids and Vice Versa. *NOTE*Also, Fuel Octane is 87 not 89 – unleaded. Unless there are exceptions that are higher compression, but I believe the bulk of Virago’s are 87 Octane* Rev. 1/06 Note: This Tech Article was created from the VOC site data.