Is the 10 Amp Fuse on my heater fan burned out?
The 10 amp fuse was not burned out. The blower motor resistor was a little rusty.I inspected and found no burned or melted wires anywhere , at the inside three way dash switch , at the blower motor and at the resistor.I know the air bag is tied into the same fuse , I must have replaced the fuse 12 times .
How many times should I replace the fuse on my air conditioner fan?
The blower motor resistor was a little rusty.I inspected and found no burned or melted wires anywhere , at the inside three way dash switch , at the blower motor and at the resistor.I know the air bag is tied into the same fuse , I must have replaced the fuse 12 times .
What happens when you change the fuse on a heater blower?
If the fuse is blown, replace it and then try the blower. If the fuse blows right away, your car may have a bad blower motor or some other problem in the system. If the blower works when you change the fuse, you may not be out of the woods yet. When the motor gets old and tired it will draw more current through the wires than a new motor.
What causes a cooling fan relay to stop working?
Cooling fan relays can stop working for any number of reasons. Common causes for relays going bad include: There are several ways to tell if a bad cooling fan relay is to blame for an overheated engine. The easiest method is to start the engine and then turn on the air conditioning.
What should I do if my heater fan doesn’t work?
Replaced 10 amp fuse , blower relay,blower motor,dash s dash switch and switch out under the hood relays. Seems no power to anything when checked with a test light. Blower motor *resistor* been tested? ..
How can I tell if my AC unit has blown a fuse?
If you suspect that your AC may have blown a fuse, the first thing you shall notice is that the outside unit of your AC is not doing anything. You may hear a minor humming sound, but that is the extent of it. The humming sound is produced because, despite no power, the furnace keeps asking the AC to run.