How to replace Transmission Control Module on Mercedes ML Class W163?

Hey guys, in this video we will show you how to remove and locate tranmssion control module on Mercedes ML Class W163. The transmission control module is married to the car so you will need some programming in order to replace it. In this video we will show you ONLY how to remove and locate it.

Is there a problem with the Transmission Control Module?

The gear shifting problem could be a dangerous one. These are all transmission control module symptoms, indicating a problem with the component. Although, you can easily check if the module is the source of trouble if there is a manual override. There will be no doubt about it if you can move to the right gear manually.

How to troubleshoot a Mercedes Benz transmission problem?

To properly troubleshoot the transmission problem on your Mercedes-Benz, you will need a diagnostic scanner that can retrieve the fault codes from the transmission control unit (TCU). The next step is to get a hold of such an advanced diagnostic scanner, read the TCU error codes which will help you narrow down the problem with your Mercedes-Benz.

What do you call a Transmission Control Unit?

A Transmission Control Module (TCM), also known as a Transmission Control Unit (TCU), is an electronic device that controls the automatic transmission in your vehicle.

Where are the transmission codes stored in a Mercedes?

Specific codes related to the transmission are stored in the TCU (Transmission Control Unit) and come generic codes such as P0705 are stored in ECU (Engine Control Unit). You don’t need to pay anyone to read the codes; you can retrieve them yourself in a couple of minutes with the right OBD II scanner.

What happens when a transmission sensor goes into limp mode?

Vehicle goes into limp mode The transmission position sensor, also known as the transmission range sensor, is an electronic sensor that provides a position input to the Powertrain Control Module (PCM) so that the transmission can be properly controlled by the PCM according to the position commanded by the sensor.

What kind of transmission does a Mercedes Benz have?

This will make your car fun to drive again, it’s like getting a free tune-up. This procedure applies to all Mercedes-Benz that come with the 5-speed 722.6 and 7 -speed 722.9. This is about 95% of Mercedes-Benz cars on the road today with the exception of models made before 1995.

Can you reset the transmission on a Mercedes Benz?

Is it possible to program a 2003 Mercedes ECM?

You will not have to go to Mercedes! We can program your 2003 mercedes ecm so that your current transponder key will work with the new computer we provide. This means our replacement ecu will be be plug and play and ready to install.

Mercedes-Benz transmissions are very solid, and whole transmission replacement is very rarely needed. The 5-speed transmission that was used between 1995 up to 2008 is one of the best transmission ever built. Now let’s see if we can help you troubleshoot your transmission.

How to replace seat sensor on Mercedes SRS?

Tip the seat top down and remove the complete car seat from the car. 11. Remove the connector block and unplug the yellow sensor (PIC 13 ) connector from it’s housing under the seat. 12.Take off the plastic side covers. 13. Loosen the 2 back bolts, (PIC 14-15 ) and remove the 2 front ones, This is optional and done to make the job easier. 14.

What does the SRS light mean on a Mercedes Benz?

What does SRS light mean? SRS stands for Supplemental Restraint System. If this warning light stays on in your Mercedes Benz, that means that there is a problem with the airbags or the components that are part of the SRS system.

How to replace the SRS seat pad light?

1. At some point, have the codes read, by an inde, (PIC 1 ) as having the seat pad SRS light on will ‘MASK’ other ( emergency tensioning retractor belt and bag) faults. 2. Buy a NEW sensor first, (PIC 2 ) I have not seen ANY signs of wear ( wires, scraping, breaks ) at all. The sensor ‘dots’ fail with use/age. Sensors cost 140 US$ at MB. 3.

Where is the SAM module located in a Mercedes Benz?

The location of the SAM module depends on the Mercedes-Benz chassis. Most SAM modules are usually installed by the fuse box. Mercedes-Benz cars may have a rear and front SAM module. Left SAM in located in engine compartment.

Can you reset the SRS module on a Mercedes?

MyAirbags is proud to offer Mercedes SRS Airbag Module Reset and Mercedes Seat Belt Pretensioner Repair services to get your Mercedes-Benz back on the road again safely.

How many miles does a Mercedes Benz ML last?

Sort of surprised, I expected it go a lot longer. The one on the ML lasted 200,000 miles.

What’s the BCM code on a Mercedes ML?

The one on the ML lasted 200,000 miles. Mine lasted 22,617 miles, I just looked at the shop order, it took the MB tech 13.6 hours to figure out, he listed codes 1106,0365 and 1337 proceeded to take half the engine apart to inspect the harmonic balancer, found out it had normal wear, replaced 4 camshaft solenoids and the alternator.

What are the most common Mercedes Benz transmission problems?

Top 5 Mercedes-Benz Transmission Problems. Won’t come out of Park gear due to a defective brake light switch. ( DIY How to replace the Brake Light Switch) Continue to read if you would like to learn how to troubleshoot your Mercedes-Benz transmission yourself and where you should start. 1. Check Fluid Level

When did Mercedes Benz start using 5 speed transmission?

The 5-speed transmission that was used between 1995 up to 2008 is one of the best transmission ever built. Now let’s see if we can help you troubleshoot your transmission. By continuing to read this article you agree to use this information at your own risk. Top 5 Mercedes-Benz Transmission Problems.

Is the Mercedes-Benz ml500 a sports car?

A standard hill-descent system automatically creeps the ML down hills when a dash-mounted button is pressed. But this Benz is no hard-core off-roader. On road, it feels more sedan than truck, more family hauler than sports car.

How many horsepower does a 2002 Mercedes ml500 have?

With 288 horsepower, the ML500 outhorses the 2001 X5 4.4 by six. For 2002, BMW added 8 hp, so it has a scant two more than the Benz. With Chevy surrendering the Ford Mustang / Chevy Camaro performance race later this year, could these two V-8 utes be the ones to take their place?

What’s the difference between a Mercedes ml500 and ML320?

The changes are subtle but easily identified. Other than badges, the only exterior differences between the ML500 and ML320 are the ML500’s wider tires (275/55VR-17 versus 255/60SR-17) and chrome strips on the ML500’s tailgate and door handles. The ML55 AMG’s exterior is unchanged.

What’s the difference between BMW X5 and Mercedes ml500?

With just the middle seats up, the Benz has 35 cubic feet of space compared with the X5’s 24. And the ML500 is less expensive–$45,615 to the BMW X5 4.4i’s base price of $50,045. But wait, the plot thickens. With 288 horsepower, the ML500 outhorses the 2001 X5 4.4 by six. For 2002, BMW added 8 hp, so it has a scant two more than the Benz.

What happens when a Mercedes Benz goes into limp mode?

When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level. The transmission has a dipstick tube but with no dipstick in it.

What to do if your Mercedes transmission is leaking oil?

Before you spend hundreds of dollars on a new valve body (will talk more about the valve body in the next step) replace the Mercedes Transmission 13-Pin Connector Adapter Plug + O-rings. The O-ring plug leaks oil and disrupts the communication between the TCU and the valve body. The O-ring is very easy to replace.

Are there any problems with the Mercedes transmission?

Including Engine, Transmission, ABS, Airbag, SRS, SBC Brakes, ESP, EPS, Air Suspension and more. In depth troubleshooting, but only works on MB cars. 2. Launch Creader X431 VII works in European, Asian and Domestic Cars.

How to reset transmission adaptive shifting in Mercedes Benz?

If you race your Mercedes-Benz, it will remember that and keep the gearbox in gear longer. If you drive it gently, it will adapt to that as well and change gears earlier. Turn the key to position 2. You should see all the dash lights come on. Do NOT start the car.

How to fix Mercedes transmission that does not shift limp?

If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: YQEnTufkSyPA_Wxt) An error occurred while retrieving sharing information.

How to check transmission fluid in a ML320 Benz?

On many cars, checking the transmission fluid level is a two-minute process just like checking the engine oil level. But with the Mercedes Benz ML320, there’s an important extra step. The ML320 is designed to require no maintenance, so it doesn’t ship with a dipstick as standard equipment.

Navigation