How to replace the serpentine belt on a Toyota Corolla?
How to replace the serpentine belt on a 1.8L Toyota Corolla, Yaris. Matrix and others – YouTube How to replace the serpentine belt on a 1.8L Toyota Corolla, Yaris.
How to replace drive belt or serpentine belt?
How to replace drive belt or serpentine belt Toyota Corolla. VVT-i engine. Years 2000-2009. – YouTube
When to replace serpentine belt on Toyota Yaris?
An adjustment bolt on the alternator provides belt tension on Toyota’s 1.8L engine. This belt is easier to replace than many, but does require that the alternator mounts are loosened up. This engine was used from 2009 to 2013 and is also found on the Yaris, Matrix, Scion xD and Pontiac Vibe.
How often to replace serpentine belt on Toyota I4?
On an I4 taking it off and on is pretty easy if you don’t have other issues that are waiting to fail (like Vang’s tensioner). Take the belt off and inspect it for cracks. If it looks good, put it on and give it another ??? miles, then inspect again. Or just put a new one on – they are not expensive.
How to replace the serpentine belt on a 1.8L Toyota Corolla, Yaris. Matrix and others – YouTube How to replace the serpentine belt on a 1.8L Toyota Corolla, Yaris.
Where can I get a new seatbelt for my Toyota Corolla?
Replacement seatbelts are available at any auto store or you can order custom seatbelts for your Toyota Corolla online. Follow the harness side of your seatbelt (this is the side you pull across your shoulder and lap to connect to the anchor side) to the points where it connects to the car frame.
An adjustment bolt on the alternator provides belt tension on Toyota’s 1.8L engine. This belt is easier to replace than many, but does require that the alternator mounts are loosened up. This engine was used from 2009 to 2013 and is also found on the Yaris, Matrix, Scion xD and Pontiac Vibe.
How do you remove a pulley belt from a car?
With the tension relieved from the belt, pull it off of the pulley that has been placing tension on it, then remove it from the around the rest of the pulleys on the engine. If the belt is severely damaged, be sure to remove any parts that may have come off of it as well. Compare the new belt to the old one.
Where do I find the serpentine belt on my car?
To access the serpentine belt, you will need to open the hood of the vehicle. The hood release can usually be found near the door on the driver’s side of the vehicle. With the hood released, you will also need to release the safety latch located at the front of the vehicle.
How can I increase the tension on my serpentine belt?
Increase the tension on the belt. If your vehicle does not have an auto tensioner, insert a pry bar or piece of wood between the alternator and the engine. Run the belt over the alternator pulley, then use the bar to pry the alternator away from the engine and increase the tension on the belt.
How do you remove a serpentine belt from a battery?
Use the appropriate sized wrench or socket to loosen the nut holding the black ground cable on the negative terminal of the battery. Slide the cable off of the terminal and tuck it to the side of the battery. You will not need to disconnect the positive terminal. Locate the serpentine belt.
What should tension be on a serpentine belt?
2) Turn the adjustment bolt clockwise until the rearmost length of the thread matches up with mark on the paper made earlier. Check the tension on the belt. There should be 1/2″ of deflection at the midpoint of the longest straight run of the belt.
Shown is a 2010 Toyota Corolla. Tools: 10, 12 and 14mm 3/8″ sockets and ratchet, breaker bar (optional). Make note of the belt path for reassembly. I have a drawing of it here. 2) Loosen the top 12mm bolt alternator mounting bolt. 3) Loosen the lower 14mm alternator pivot bolt. This is where a 1/2″ breaker bar can be useful.
Which is the smooth side of the serpentine belt?
The kind of serpentine belt diagrams you will see on our site will be easily understandable diagrams for your make and model vehicle. The serpentine belt track to the right uses a tensioner and is from a 7.4L big-block. Notice that the smooth side of the belt is always against the smooth surface of the pulley.
When was the new serpentine car belt invented?
The new serpentine belt, which was invented in 1979 is a much wider belt then the traditional automotive belt. This wider belt can be put under much tighter tension, which removes a lot of slippage and friction experienced by older belt systems.
How often do you change the timing belt on a Toyota Corolla?
It is a freewheeling engine, which means that should the belt stretch past its useful life, engine damage most likely will not occur. Toyota does not provide a recommended interval for changing the timing belt, but previous service use and history suggests that the timing belt should be changed every 60,000 miles.
Where is the timing mark on a Toyota Corolla?
Check the timing mark on the camshaft. The small hole in the sprocket should line up with the dot on the head at the 12 o’clock position. If it is not lined up, turn the crankshaft one more turn, and both marks will line up.
What’s the best way to replace a timing belt?
Loosen the tensioner bolt and push the tensioner away from the belt. Tighten the bolt just enough to hold the tensioner out of the way. Lift the timing belt off the sprockets and pulleys. Remove the tensioner pulley. Spin the pulley in your hand. If you hear it squeaking or grinding, replace it. If it has any resistance, replace it.
What kind of engine does a Toyota Corolla have?
This engine was used from 2009 to 2013 and is also found on the Yaris, Matrix, Scion xD and Pontiac Vibe. Shown is a 2010 Toyota Corolla. Tools: 10, 12 and 14mm 3/8″ sockets and ratchet, breaker bar (optional).
What kind of belt does a 3800 V6 use?
3800 V6 Belt Routing Picture and Ro… Supercharged 3.8L V6 Drive Belt rou… Vortec 5.3 and 4.8L V8 Truck Belt R…