How to operate the remote start function on your Infiniti?
Press the LOCK button on the key fob. Then, within 5 seconds, press and hold the ENGINE START button for at least 2 seconds. The engine will start, the parking lights will turn on and the Automatic Climate Control will begin heating or cooling the vehicle depending on the selected temperature.
How many fuses are in an Infiniti G35?
Fuse Box Diagram № Ampere Rating Assignment 1 10 Fuel Injectors, Body Control Module (BCM 2 – Not Used 3 – Not Used 4 – Not Used
How do you start a car with remote start?
To start driving after using remote start, depress the brake pedal and press the ignition switch. The ignition switch is pushed with an Intelligent Key in the vehicle but the brake pedal is not depressed. The Remote Start function has been switched to the OFF position in Vehicle Settings of the vehicle information display.
How long does the remote start function last?
The first 10-minute run time will start when the remote start function is performed. The 10-minute extension will start immediately after the remote start function is performed a second time. For example, if the engine has been running for 5 minutes, and you press the ENGINE START button, the engine will run for a total of 15 minutes.
Press the LOCK button on the key fob. Then, within 5 seconds, press and hold the ENGINE START button for at least 2 seconds. The engine will start, the parking lights will turn on and the Automatic Climate Control will begin heating or cooling the vehicle depending on the selected temperature.
Why is my I-key system not working?
Once you press the button, the switch is off or if off if not in park. When I turned the car on and switched it to drive the i-key system error came on. The drive indicator showed the correct gear and the car ran fine. When I scanned the car, b2603 came up.
Why is my Nissan Altima saying I-Key System Error?
Hey guys, had a question and was wondering if anyone knew the solution. I have a 2014 Altima 2.5 S. When getting in last night the message “I-key system error” was on the dash display. The manual says go see a dealer but I wanted to know if I could fix the error myself.
Do you have remote start, does it work?
Go to the dealer and document it. Just in case it gets worse, like the entire programming messes up. Does the key lock unlock the doors, the trunk and does it set off the alarm? If so, then everything sounds fine. Do you have remote start, does it work?
What to do when remote engine start is not working?
Press and hold the RES button within five (5) seconds of pressing the LOCK button until the turn signal lights turn ON. Whenever an applied vehicle has a concern with the Remote Engine Start (RES) feature not working properly, make sure to verify the incident before starting any diagnosis and/or replacing parts.
Do you need a pin for remote engine start?
As an added security measure, A PIN is required before Remote Engine Start/Stop feature can be used on the INFINITI InTouch Services app or Owners Portal. Please secure your PIN appropriately and do not share it.