How to fix a door failure on a Jeep Cherokee?
Push the new door onto the connector and slide the connector pin all the way into the installed door. Install the second door, sliding the connector pin into the far side of the second door.
Why is my Jeep JGC blend door not working?
What I discovered was this is a very common problem with my model of JGC (1999-2004). I love my Jeep, but the person that designed this blend door actuator system needs to find new work. The design is inherently weak, and relies on a calibration phase that puts intense pressure on the weakest points in the system.
How to install far blend door in Jeep Cherokee?
To install the far blend door you will probably not be lucky enough to have the connector key in the right place. No worries – disconnect your battery for about 30 seconds and reconnect. This clears the Automatic Tempature Control computer and it will run the calibration test automatically. Turn the ignition to run and turn the climate control on.
Push the new door onto the connector and slide the connector pin all the way into the installed door. Install the second door, sliding the connector pin into the far side of the second door.
What I discovered was this is a very common problem with my model of JGC (1999-2004). I love my Jeep, but the person that designed this blend door actuator system needs to find new work. The design is inherently weak, and relies on a calibration phase that puts intense pressure on the weakest points in the system.
To install the far blend door you will probably not be lucky enough to have the connector key in the right place. No worries – disconnect your battery for about 30 seconds and reconnect. This clears the Automatic Tempature Control computer and it will run the calibration test automatically. Turn the ignition to run and turn the climate control on.
Why are the doors on my Jeep stuck?
No climate control recalibration was needed at the Jeep garage, as it works exactly as it should. (Save $100). The doors on the old box were glued shut by black goo that was made of melted rubber insulation. This causes the plastic gears on the box to fail.
How do you open the rear hatch of a Jeep Grand Cherokee?
The next method will only work if you do not have plastic lift handles. Scan the area between the bumper and the gas tank on the bottom part of your cargo floor, there you will see two metric nuts in the size 15mm that are there to hold on to the striker bracket strongly to the floor. This thing is what allows the door to be closed.
Can you open the trunk of a Jeep Grand Cherokee?
If you or anyone at all gets locked up inside of the trunk of a Jeep Grand Cherokee then you can easily pull on the latch to open it. This is really good input from the designers and engineers since it could literally save someone’s life if there was ever a situation of that sort. How to Open a Stuck Rear Hatch Door of a Jeep Grand Cherokee?
Why is the latch on the rear door stuck?
The rear door latches often get stuck because they simply aren’t used as frequently as the front doors. One thing that happens is the door handle button will feel like it isn’t doing any “work”, and/or the door lock slider on the inside will be jammed in between the lock and unlock positions.
Why are my power door locks not working?
Please try again later. Power door locks are prone to failures due to electrical interruptions, corrosion, broken wires or blown fuses. Find out why a lack of any movement in door locks is most likely a result of a blown fuse with help from an auto mechanic in this free video on troubleshooting car problems.
How to fix a door lock on a Jeep Grand Cherokee?
Fixing a stuck door lock on your 2005-2010 Jeep Grand Cherokee is one of the easiest things you can do yourself. Removing your interior door panel to access the locking mechanism is easy, and I’ll walk you through it. Don’t spend $200+ on this at the dealer. Instead, watch this detailed video and save yourself some dough.
What’s the problem with my 1998 Jeep Cherokee?
1998 jeep Cherokee classic has door locking/unlocking problem. sometimes they work and sometimes they don’t. passenger door lock makes a ticking noise when I push the door lock on drivers door. nothing will lock or unlock electronically. any help on how to fix would be very helpful. oldman44oldjeep98, May 1, 2018.
How to fix Jeep Cherokee a / C blend door failure?
When you put the ignition to run and turn on the climate control system it will run though the calibration test that broke the OEM equipment to begin with. Watch the doors move, and pay attention to the amount of torque applied to the doors – the plastic ones didn’t stand a chance!
Why is my passenger door lock not working?
If the passenger door button doesn’t work you will have to dig deeper and figure out where the problem is like 2oldjeeps says. The switch is the most common problem though. The door lock circuit is actually in the passenger door. I have an issue with my 00 XJ where they will work only occasionally and I can hear one of the relays clicking.
1998 jeep Cherokee classic has door locking/unlocking problem. sometimes they work and sometimes they don’t. passenger door lock makes a ticking noise when I push the door lock on drivers door. nothing will lock or unlock electronically. any help on how to fix would be very helpful. oldman44oldjeep98, May 1, 2018.
How does the idle work on a 1998 Jeep Cherokee?
The idle on the 1998 Jeep Cherokee is controlled by an idle air control valve. This part works with the vehicle’s main internal computer to regulate the air and idle speed of the engine.
Where is the throttle body on a 1998 Jeep Cherokee?
If that doesn’t work, you can replace the part to regulate the idle speed once again. Open the hood of your 1998 Jeep Cherokee. Find the throttle body straight back from the A/C compressor, to the left of the fuel injector and to the immediate right of the air intake temperature sensor on the engine block.
How do you reset the remote on a Jeep Cherokee?
The programming sequence will also allow you to reset the remote systems, and you can have them ready to use in minutes using just the ignition key. Enter your Jeep and press the Lock button on your keyless remote five times in 10 seconds. Insert your key into the car’s ignition, turn it to the “Run” position and wait for the car’s chimes to stop.
Can you reset the panic alarm on a Jeep Cherokee?
The Jeep’s remotes allow you to control your panic alarm, your door locks and your trunk release, and can be programmed completely from your driver’s seat. The programming sequence will also allow you to reset the remote systems, and you can have them ready to use in minutes using just the ignition key.