How to change the ignition cylinder on a Sienna?
Unscrew and remove the black circle with the green light from the chip reader that sits on top of the ignition cylinder. Insert key and turn to ACC position. Obviously turning the key is the whole problem, but you need to do this.
How do you replace a tumbler on a Sienna?
Slide the tumbler cylinder out of the metal housing. Insert your key and observe the offending split tumblers that do not retract. Remove these with pliers. Be sure to take out the springs that sat under those tumblers so they don’t fall in one day.
Where is the transponder on a Sienna ignition switch?
Further investigating, I found out that the chip (transponder) is embedded in the key, but the antenna is in the ring around the cylinder, and not in the part I took out. So, I now know that there are unchipped keys, which are slim, and chipped ones which are “fat”.
Why is my Sienna ignition switch not working?
When I told him I found it online for $35, he said that it is b/c my key has the immobilizer chip in it, and he guarantees that the replacement part will not work. Further investigating, I found out that the chip (transponder) is embedded in the key, but the antenna is in the ring around the cylinder, and not in the part I took out.
What are the keys for a Toyota Sienna?
Click HERE for programming information. 1998, 1999, 2000, 2001, 2002, 2003 Toyota Sienna XLE, Sienna LE non-transponder key replacement (X217/TR47) – (Plastic Cover) Q: I lost my Toyota Sienna car keys, have no spare, and need a replacement.
Can You program a key for a Toyota Sienna?
For Toyota Sienna models that are equipped with a transponder system and/or remote/ intelligent key/ fob key: Codes are available. However, programming is necessary and therefore you will have to either tow the car to the dealer or have an automotive locksmith come and program the key on site.
When to remove master key from ignition lock cylinder?
Remove master key from ignition lock cylinder. Within 10 seconds of removing master key from ignition lock cylinder, insert master key to be registered in ignition lock cylinder. Within 10 seconds of inserting master key to be registered in ignition lock cylinder, depress and release accelerator pedal one time.
How to insert third transponder key in ignition lock cylinder?
Insert third transponder key into ignition lock cylinder for registration DO NOT TURN ON. After security light goes off remove third key from ignition. The security light should extinguish and then commence to blink regularly. 5. Wait 30 seconds for the programming cycle and programming mode to close.