How much gear oil does a T18 transmission hold?
A T18 4 speed takes 7 US pints(3 1/2 US quarts).
What’s the difference between T18 and T19?
T19 versions offer a 6.32:1 (IH), 5:1 or 4:1 (Ford) low gear. The T18 is synchronized in the second through fourth gears. All gears are helically cut except first and reverse, which are spur gears. T19s are fully synchronized in all gears and feature all helically cut gears.
How much does a T18 transmission weigh?
The cast iron T18 transmission case measures 11.87″ in length, 17.45†in height, and weighs approximately 145lbs. The T18 utilizes a cast iron top cover which is retained by six bolts.
Is the T18 transmission any good?
The Borg-Warner T18 transmission is famous for its strength and durability in the truck and off-road world and was built for quite a few Ford trucks, IH vehicles, and Jeeps. Extremely strong, but with good highway and trail manners, it’s adaptable to essentially all of the Jeep transfer cases from ’66 to ’91.
Are all NV4500 transmissions the same?
Dodge 4wd NV4500 transmissions have always maintained the same gear ratios and bolt patterns throughout production; however, variations occur between diesel (and V10) versus gas models. Diesel NV4500 4WD transmissions always have a 29 spine rear output shaft with a 6-1/4″” rear tailhousing.
How do I identify my Borg Warner transmission?
Locate the identification tag number. A quick way to confirm that your transmission is a Borg Warner and what vehicle it was designed for, is to locate the identification number stamped into the “metal tag bolted onto the tail housing,” according to 5speeds.com.
How much HP can a NV4500 handle?
Registered. The NV4500 will not hold up to steady towing even if you limit it’s input to less than 300HP. If you limit application of power to everything but 4th it should hold up pretty well.
Which is better NV4500 or NV5600?
The NV5600 is the workhorse trans that has tighter ratios (ending with the same final drive) than the NV4500. The gap between 3rd and 4th in my 4500 is considerable, so towing lots of weight uphill takes forethought on what gear you wanna be in/what point you need to shift, but nothing crazy.
How do I know what Borg Warner 4-speed transmission I have?
On a T5, the identifier should begin with 13-52. The casing number on a Borg Warner T19 is 1309and the T18 casing number is 1301. Both the T18 and T19 are “top loaded heavy-duty 4-speed transmissions with [a] cast iron case and shift cover,” according to motivegear.com.
How do I identify a Borg Warner T 10 transmission?
Look at the transmission from the driver’s side of the vehicle by going under the vehicle at the driver’s-side door. If the transmission is off the vehicle, it is on the left side, when looking from behind the unit and the input shaft is pointing forward.
How often do you change fluid on a Borg Warner T-10?
And remember to change your fluid at least every 3 years or 15,000 miles (whichever comes first) and your Muncie, Super T-10, and T-10 should reward you with many years of reliable service.
When did Borg Warner make the T18 transmission?
Borg-Warner T18 & T19 Transmissions. The T18 is a renowned, heavy-duty truck transmission designed for and used in ½, 3/4 and 1+ ton trucks. The T18 was made by Borg-Warner Gear from 1965 to 1991. They are found in Ford, Jeep and IH trucks.
What’s the maximum torque of a Borg Warner Super T-10?
Discussion in ‘ Transmission & Driveline Topics ‘ started by Adam G, Sep 15, 2005 . Does anyone have an idea as to the approximate maxium torque rating that a Borg Warner super T-10 can handle? Dickson TN. 350ftlbs I would guess is the max with traction.
Where are the drain plugs on a Borg Warner T-10?
The first order of business is making sure that you have access to the transmission underneath your car. You should be able to view and touch with at least one of your hands the two transmission square head drain plugs on the passenger side of the transmission. The drain plugs are square and point directly towards the passenger side door.