How many Litres of ATF does Avanza need?
| System | Capacity (l) | Type |
|---|---|---|
| Manual transmission | ||
| 1.1 | Gear oil GL-4 75W-80 | |
| Automatic transmission | ||
| 4.9 | Toyota ATF Type T-IV / Dexron III |
How do you check the transmission fluid on a VE Commodore?
To check your automatic transmission fluid, follow these steps:
- Pull out the dipstick. With the gearshift in Neutral or Park and the parking brake on, let your engine run.
- Check the fluid.
- Wipe the dipstick with a clean, lint-free rag; then reinsert it and pull it out again.
How to check the level of ATF fluid?
1. Park the vehicle on the level ground. 2. Warm up the engine to normal operating temperature (the radiator fan comes on), then turn the engine off. 3. Remove the dipstick (yellow loop) (A) from the dipstick guide tube, and wipe it with a clean cloth. 4. Insert the dipstick back into the dipstick guide tube. 5.
How do you check the fluid level in a car?
The ATF level is checked when fluid is a specific temperature and with engine running. The ATF temperature is read out by the Vehicle Diagnosis, Testing and Information System VAS 5051B . If the test temperature has been reached, the sealing plug in the oil pan is removed to check the ATF. Marty
When to add ATF to a transmission fluid change?
Wait approximately 30 seconds and if no more ATF drips out, top it off. Add ATF using ATF Filler Tool V.A.G 1924 until ATF exits from check hole.
How to check the ATF level in a Honda Pilot?
• Check the ATF level within 60—90 seconds after turning the engine off. • Higher ATF level may be indicated if the radiator fan comes on twice or more. 1. Park the vehicle on the level ground. 2. Warm up the engine to normal operating temperature (the radiator fan comes on), then turn the engine off.
https://www.youtube.com/watch?v=VOROpb9qDcc