How does the security system on a Harley Davidson work?
The security system installed in a Harley Davidson motorcycle protects against intruders by sounding an alarm if disturbed. You can troubleshoot common problems that can cause the alarm to malfunction.
Where is the alarm on a Harley Davidson?
Return the back end of the seat to its original position so it covers the module. Trace the wiring from the alarm’s sensor which is typically mounted under the seat, along the frame of the Harley Davidson motorcycle, until you reach the alarm system next to or near the handlebar.
What happens if you dont Set Your Harley alarm override pin?
With the newer HD Security Systems using proximity FOBs where the key FOB needs to be close to the bike for it to start, this is now more important then ever. If the battery in your FOB dies or it is damaged and you have not set your Harley Alarm Override PIN Code, you will not be starting your bike.
How to set or change a Harley-Davidson security system Pin code?
Here is how to set or change a Harley-Davidson Security System Alarm Override PIN code. With the newer HD Security Systems using proximity FOBs where the key FOB needs to be close to the bike for it to start, this is now more important then ever.
The security system installed in a Harley Davidson motorcycle protects against intruders by sounding an alarm if disturbed. You can troubleshoot common problems that can cause the alarm to malfunction.
Do you have to reset the factory alarm on a Harley Davidson?
Your Harley came with a key fob. If for some reason you do not have the key fob present, but you do have the key, you will need to have reset the factory alarm with your own personal identification number.
Can you start a Harley Davidson without a key fob?
Changing the personal identification number will allow you to start your Harley when you do not have the key fob, or even if the battery in key fob has not been changed. Without resetting your alarm, your Harley will only be a pretty lawn ornament.
Where is the siren on a Harley Davidson?
Route the siren harness lead out from under the right side of the fender. Get the siren (1) from the kit and insert connector [142B] (2) into the siren receptacle until the connector latches securely. 7. With the sounder disc (3) facing the mud flap, position the siren on the mud flap as shown in Figure 5.
Can a factory security system disarm a Harley Davidson?
Yes ( 0 ) Hello Roadking Kevin, The security system reads the fab and will disarm on its own. If the bike came factory with a security system, your owners manual should tell you more. I am unaware of how to completely disarm it if that is what you are looking to do.
Where is the security module on a 2007 fxstb?
I have a 2007 FXSTB purchased from a salvalge yard and want was trying to find where the module is for the security system (if it has one ) would be located. The “key” icon lights when the ignition is turned on. Does this indicate it has the option , or is that light on all models whether the system was factory installed or not?
How to reset the security code on a Harley Davidson touring?
This article will show you how you can reset the security code, or override the fob on your Harley Davidson Touring. Turn the ignition switch located on the gas tank to “off,” and then turn it to “on.” Figure 1. Turn ignition switch. Press both turn signal switches together and keep them pressed.
Harley Davidson security system works while the ignition is turned off. After you park and turn off your ignition, the smart security system automatically activates within five seconds if it cannot detect any motion near the bike. The security system arms the bike until it is disarmed by using the key fob.
How to start a bike without a fob?
Here is how to use the code you jus entered to start your bike without the Fob present!! 1. Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window. 2. Enter the first digit of your PIN (a) by pressing the left turn signal switch (a) times.
Why does my Harley Davidson bike not start?
When I turn on the bike and put it in the run position, the fuel pump kicks on, but when I push the start switch the bike doesn’t even try to turn over. The battery is fully charged and the fuel pump turns on when I push the switch, but nothing else happens.
Can You disarm a bike with a pin?
When armed, the security system will not allow a PIN disarm because it detects the bike is in motion, so be careful not to move it while trying to reset the system. The factory security override PIN code is 3-1-3-1-3, which you should have changed as soon as you got the bike to something more secure.
Here is how to use the code you jus entered to start your bike without the Fob present!! 1. Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window. 2. Enter the first digit of your PIN (a) by pressing the left turn signal switch (a) times.
Harley Davidson security system works while the ignition is turned off. After you park and turn off your ignition, the smart security system automatically activates within five seconds if it cannot detect any motion near the bike. The security system arms the bike until it is disarmed by using the key fob.
When I turn on the bike and put it in the run position, the fuel pump kicks on, but when I push the start switch the bike doesn’t even try to turn over. The battery is fully charged and the fuel pump turns on when I push the switch, but nothing else happens.
What should I do if my bike wont start?
Charge the battery or replace it if it’s dead. Am easy way to test your battery is by checking the voltage-drop with a multimeter as you try starting the bike. If your fully charged battery drops below 11,5 volts under load (while you crank the starter), it needs to be replaced.