How do you turn up the shock on Invisible Fence?
How to Change the Strength of an Invisible Fence
- Push the button on the receiver. A light on the receiver will flash.
- Adjust the distance from the boundary wire to trigger a warning alarm. Most transmitter boxes have a knob or lever to use to change the distance.
- Change the metal prongs on the receiver.
Why is my underground dog fence beeping?
If your Invisible Fence control panel is beeping every second, the most likely issue is that you have a wire break somewhere on your property. If your Invisible Fence control panel is beeping with a lengthy pause between each beep, it’s possible your backup battery unit needs to be replaced.
How do you cancel out parts of underground fence for dogs?
The only way to cancel out a part of an underground pet fence is to twist two boundary lines together. Taking the wire that emits the signal to the transmitter, you should estimate where you want the area to be that your dog can pass through unharmed. Then create a double loop layout.
How do I know if my invisible fence collar is working?
A light on the battery tester and audible tone on the receiver confirms that the collar is operating properly. If you get the audible warning but not a light, replace the battery.
What does blinking green light mean on Invisible fence?
When you first insert the battery into your receiver, the status light will flash green. This indicates that the receiver has started properly. In the event that the lights do not flash, check the battery to be sure that it has been inserted properly.
How do you test an invisible fence?
Make sure you touch both points on the receiver at the same time when you hear the collar beeping. It will tell you definitively that the fence is or is not working. It is a good thing if when you test your collar at the signal field and it makes continuous “Beep-Beep-Beep” sound.
Can you put underground dog fence in conduit?
Yes, in-ground dog fence wire can go through conduit as long as you don’t bury it greater than 6 inches below the soil and no less than a few inches under the driveway or sidewalk.
How deep do you bury dog fence wire?
between 3″ and 24″
The main reasons for burying dog fence wire are aesthetics, protection, and trip hazard. If you are planning on burying the wire we recommend a depth between 3″ and 24″ – burying the wire too deep may begin to alter the signal strength and risks running into other buried lines on utilities in your yard.
How does PetSafe in ground fence work for dogs?
A radio signal travels from the Fence Transmitter through a buried wire, marking the boundaries you wish to set for your dog. Your dog wears a Receiver Collar that detects the signal at the boundary. As your dog approaches the boundary, the receiver issues a warning tone. If he proceeds further, he receives a safe but startling Static Correction.
What should I do if my dog approaches my fence?
As your dog approaches the boundary, the receiver issues a warning tone. If he proceeds further, he receives a safe but startling Static Correction. While harmless, the correction will persuade him to stay in the containment area you’ve established.
Is it safe to dig boundary wire for in ground fence?
Warning: Before digging to bury the Boundary Wire of your In-Ground Fence™, make sure that there are no buried power, telephone, or other electrical cables in the vicinity. Many underground cables carry high voltage and digging into them, or laying your Boundary Wire on them, may lead to hazard from shock or electrocution.
Where can I get an invisible fence installed?
Invisible Fence®Brand installers will come to your home and install your new PetSafe®System for an additional cost. Contact your local dealer at 1-877-866-DOGS (3647) or visit our website at www.invisiblefence.com for more information.