How do you turn the channel lock on a Nissan Altima?
Nissan makes a special tool for this (J38879), but you can also use a very large pair of channel-lock pliers or vise grips. If it’s not too tight, you might even be able to turn it by hand. Unscrew the lock ring counterclockwise. Lift up the tube plate and disconnect the fuel tube and electrical connector on the bottom of the plate.
Where is the fuel pump in a car?
That’s the job of the fuel pump, located in the top of the fuel tank. The pump is an electrical device that feeds fuel from the tank, through the fuel lines, to the engine. A car that will crank, but not start, is often a sign of problems with the pump. Changing the pump will take about an hour.
Where is the fuse box for changing the fuel pump?
Changing the pump will take about an hour. Open the fuel cap to relieve pressure in the fuel tank. Open the fuse box cover in the passenger compartment. The fuse box is located below and to the left of the steering wheel and has a snap-off cover.
How do I replace the lock ring on my gas pump?
Attach the fuel tube and electrical connector of the new pump, to the bottom of the tube plate and seat the plate back into the inspection hole. Replace the lock ring by screwing it clockwise. The factory specifications are for 22 foot-pounds of torque, but as long as you tighten it firmly, it will be all right.
Where is the fuel pump relay located in a car?
The relay is located in your vehicle’s Intelligent Power Distribution Module (IPDM) which is located on the right front of the engine compartment, right behind the headlight. In the diagrams down below I have included diagrams for the location of the IPDM and a diagram with the fuse and relay locations in the module itself.
Where is the FP relay on a car?
The FP Relay is in the intelligent power distribution module in the right front engine compartment. Check fuse no.32 15amp in the IPDM Do this find the fuel pump connector and power the black and yellow wire from the battery this will cause the fuel pump to come on.
Changing the pump will take about an hour. Open the fuel cap to relieve pressure in the fuel tank. Open the fuse box cover in the passenger compartment. The fuse box is located below and to the left of the steering wheel and has a snap-off cover.
Nissan makes a special tool for this (J38879), but you can also use a very large pair of channel-lock pliers or vise grips. If it’s not too tight, you might even be able to turn it by hand. Unscrew the lock ring counterclockwise. Lift up the tube plate and disconnect the fuel tube and electrical connector on the bottom of the plate.