How do you turn off the sensor light on a TCL TV?

How do you turn off the sensor light on a TCL TV?

Follow the steps below:

  1. Press the HOME button on your TCL remote.
  2. On the left side of the screen, select the SETTINGS option and press OK.
  3. Select the SYSTEM option and press OK.
  4. Go to POWER and press OK.
  5. Select STANDBY LED and press OK.
  6. Here you have the option of turning this light on or off.

Why does light flash on TCL TV?

If your TCL TV light keeps blinking or flashing, this could be an indication that you haven’t connected to your wireless or wired internet yet and it is searching for a signal.

Why wont my TCL turn off?

If your TCL TV won’t turn on or off, first check to make sure that the TV itself is not the issue. To complete a power cycle, unplug the TV from its power source for 60 seconds then plug the TV back into that same power source to help things reset and restore back to normal.

How do I force shutdown my TCL TV?

Below are the step-by-step instructions:

  1. Press on your remote to open the main screen.
  2. Scroll up or down and select Settings.
  3. Press the right arrow button and select System.
  4. Press the right arrow button and select Power.
  5. Press the right arrow button and select System Restart.
  6. Press the right arrow button and select Restart.

Why does my TCL TV keep going black?

If a TCL Roku TV’s screen has gone black but the audio still works, it is mostly due to loose cable connections or a hardware issue affecting your TV’s LED lighting. Unplugging the TV from all cable connections, including power, and then plugging it back in after 5-10 minutes resolves the issue.

Is there a reset button on a TCL TV?

2nd way to do a factory reset TCL Smart TV Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on the TV connector panel. Continue to hold the RESET button for approximately 12 seconds. When the reset cycle completes, the status indicator comes on dim. Release the RESET button.

How do I reset my TCL TV black screen?

In order to power reset your TCL Roku TV, follow the steps below:

  1. Turn off your TCL Roku TV using the remote.
  2. Unplug the Power Cable.
  3. Wait for 5-10 Minutes and plug the power cable again.
  4. Check if the issue is resolved.

How do I reset my TCL TV without a remote?

Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on the TV connector panel. Continue to hold the RESET button for approximately 12 seconds. When the reset cycle completes, the status indicator comes on dim. Release the RESET button.

What to do when your TCL TV light won’t turn off?

If your TCL TV light is blinking and it won’t turn off, use your remote to disable the light. To do this, press ‘Home’ on your remote control, ‘Settings’ > ‘OK’ > ‘System’ > ‘OK’ > ‘Power’ > ‘OK’ > ‘Standby LED’ > ‘OK’ > then, do disable the light select ‘OFF’ > then press ‘OK’ on the remote to confirm that you want the light off.

What does the status light on a Tcl TV mean?

All TCL televisions have status lights on the bottom-middle of the bezel. Whether the light is on, off, or blinking indicates the current status of the TV. The status light should blink every time you use the remote. The blinking idicates the TV is receiving a signal from the remote. Try pressing a button on the remote.

How do I Turn On my TCL remote?

Press the HOME button on your TCL remote. On the left side of the screen, select the SETTINGS option and press OK. Select the SYSTEM option and press OK. Go to POWER and press OK.

Why does my TCL TV keep flashing black?

If your TCL TV keeps flashing black, a power cycle may help to correct any small glitches that have found their way into your TV. To complete a power cycle, reference back to the previous section “TLC Light Blinking Won’t Turn On” and follow the steps to reset your TCL TV.

If your TCL TV light is blinking and it won’t turn off, use your remote to disable the light. To do this, press ‘Home’ on your remote control, ‘Settings’ > ‘OK’ > ‘System’ > ‘OK’ > ‘Power’ > ‘OK’ > ‘Standby LED’ > ‘OK’ > then, do disable the light select ‘OFF’ > then press ‘OK’ on the remote to confirm that you want the light off.

All TCL televisions have status lights on the bottom-middle of the bezel. Whether the light is on, off, or blinking indicates the current status of the TV. The status light should blink every time you use the remote. The blinking idicates the TV is receiving a signal from the remote. Try pressing a button on the remote.

Press the HOME button on your TCL remote. On the left side of the screen, select the SETTINGS option and press OK. Select the SYSTEM option and press OK. Go to POWER and press OK.

If your TCL TV keeps flashing black, a power cycle may help to correct any small glitches that have found their way into your TV. To complete a power cycle, reference back to the previous section “TLC Light Blinking Won’t Turn On” and follow the steps to reset your TCL TV.