How do you reset the scanner on a 96 pro?
Member
- Turn off the scanner, then turn it on again. The scanner briefly displays the DSP boot version, then the WELCOME screen.
- Press “0” (zero) while on the WELCOME screen. The scanner displays: System Tests. Select Test.
- Press “1” (one). The scanner displays: Factory Init. Erase Memory.
- Press ENTER. The scanner displays:
How do you use a Radio Shack digital trunking scanner?
Press the “Program” button, then “Limit.” “LO” will appear on the screen. Enter the low frequency where you want to begin searching. Press the “WX/E” button and “HI” will appear on the screen. Enter the highest frequency you want to search to and press “WX/E” again.
What is a dual trunking scanner?
From The RadioReference Wiki The Pro 95 is a dual trunking handheld scanner designed by GRE and sold by Radio Shack. It features the ability to track both conventional and trunked radio systems at the same time. It will follow Motorola type I and II systems, as well as EDACS trunked radio systems.
What does trunking mean on a scanner?
A trunked radio system is a two-way radio system that uses a control channel to automatically assign frequency channels to groups of user radios. These systems typically have access to multiple channels, up to 40-60, so multiple groups in the same area can communicate simultaneously.
How do I reset my radioshack 95 scanner?
To Reset the scanner, turn off the scanner then turn it back on. Insert a pointed object, such as a straightened paper clip, into the reset opening above and to the right of the power jack on the side of the scanner. Then gently press and release the reset button inside the opening.
What kind of scanner is the Radio Shack Pro 96?
From The RadioReference Wiki The Pro-96 is discontinued and was manufactured for Radio Shack by GRE America Inc. The Radio Shack is a Digital Trunk Tracking scanner which boasts the ability to track APCO 25 digital trunking systems, in addition to following Motorola type I/II systems and EDACS trunking systems.
Is the pro-96 compatible with the trunking system?
This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range: The Tap Point for a PRO-96, is in the exact same place as the Tap Point for the PRO-95.
Where is the tap point on a Pro 96?
The Tap Point for a PRO-96, is in the exact same place as the Tap Point for the PRO-95. (TP4) PART #: 10983344 Pot Assy, W/Switch Volume 8.75