How do you fix oil temperature?
If the AT Oil Temp light flashes while driving, please stop the car as quickly as possible in a safe place and allow the engine to cool or idle until the light goes off. If you keep driving the car in such condition for long you could cause more expensive transmission damage to your car.
What does the oil light mean on a Subaru?
Low Oil Level
It Could Indicate Low Oil Level The oil warning light could also indicate that your Subaru vehicle’s oil level is low. You should check your oil level right away if the light is on. If the oil doesn’t come up to the line, you may have found the cause of the engine warning light.
What should your transmission temp be?
175 to 220 degrees
The optimal temperature range for transmission fluid is 175 to 220 degrees. Above that, for every 20 degrees bad things happen, starting with formation of varnish at 240 degrees, followed by seals hardening, plates slipping, seals and clutches burn out, carbon is formed, and, ultimately, failure.
How to get a temp light on a Subaru Forester?
Turn the ignition switch OFF (Went onto side of road – put it in park, turned off car, removed key) 3. Turn the ignition switch ON (Waited 5 seconds, then put key in and turned on ignition so dash lights up) 4. Start the engine (started car) 5. Drive the vehicle at speeds greater than 12 MPH (put car into D and drove for about 30 seconds at 40 mph)
What to do at oil temp light flashing?
Move the gear selector to “3” (with foot still on brake, move gear selector to “3”. Leave it there for <1 second) Move the gear selector to “D” (with foot still on brake, move gear selector to “D”. Leave it there and look at dash – no blinking AT OIL TEMP light. Its lit up solid instead).
What’s the code for the at temp light flashing?
In the past few weeks we’ve been having issues with the AT temp light coming on and flashing on longer freeway drives – 30-ish miles or more – with Slynki (MY98, Phase I 4EAT). Did the secret handshake hokey pokey and came up with code 23 (engine speed signal – no signal input above 10km/h).
What are the sensors on a Subaru Forester?
27 ATF temperature sensor. Detects open or shorted input signal circuit. 31 Throttle position sensor. Detects open or shorted input signal circuit. 33 Front vehicle speed sensor. Detects open or shorted input signal circuit. 36 Torque converter turbine speed sensor. Detects open or shorted input signal circuit. 38 Torque control signal.