How do you check the stator on a Honda 300?
To test the stator, find the three yellow wires coming from the stator and unplug the connector. Check resistance between each of the three yellow wires. You’re looking for 0.09-0.11 ohms or somewhere close to that, doesn’t have to be exact. Now, test for continuity between each yellow wire and ground.
Why does my Honda FourTrax 300 have no spark?
I have been working on a 1990 fourtrax 300. I have no spark at all. I have checked all fuses, checked all of the connections, replaced the coil, checked the kill switch, replaced the CDI, and replaced the starter (not the problem but needed changed anyhow). The motor will crank but that’s it.
What to do if your Honda has no spark?
Used a multi meter to check the spark plug (from instructions on YouTube videos) and there was no continuity on the spark plug. Replaced the spark plug, turned the engine over with the plug grounded to the cylinder head, visible spark.
What causes an ATV to not have a spark?
When your ATV is not getting a spark, the problem is with one or more of these electrical components: 1 The spark plug 2 The spark plug wire 3 The ignition coil 4 The stator 5 The crankshaft positioning sensor 6 The CDI or ECU 7 The battery 8 Wiring and connectors connecting these components
Why does my engine not have a spark?
Be careful not to crank the engine for too long before checking the plug, or youøss risk overheating and possibly damage the starter motor. Whether the spark plug gapping is incorrect, the plug has gone bad, or it’s the wrong plug altogether for your engine, it may no longer be able to provide a spark.
I have been working on a 1990 fourtrax 300. I have no spark at all. I have checked all fuses, checked all of the connections, replaced the coil, checked the kill switch, replaced the CDI, and replaced the starter (not the problem but needed changed anyhow). The motor will crank but that’s it.
Used a multi meter to check the spark plug (from instructions on YouTube videos) and there was no continuity on the spark plug. Replaced the spark plug, turned the engine over with the plug grounded to the cylinder head, visible spark.
How can I tell if my ATV engine is sparking?
To quickly tell if your ATV is getting spark, remove the spark plug from the engine. Reinsert the plug back into the coil wire. Hold the electrodes of the spark plug close to the engine to ground it, and try starting the engine. If you see spark coming from the end of the spark plug, your ATV engine is getting spark.
Where does the spark come from on an ATV?
Reinsert the plug back into the coil wire. Hold the electrodes of the spark plug close to the engine to ground it, and try starting the engine. If you see spark coming from the end of the spark plug, your ATV engine is getting spark.