How do I set up my Epson Stylus 1400?
Epson stylus photo 1400 wireless network setup Remove the yellow tapes from the cartridges and insert the cartridges in the cartridge holder according to the colours specified. Now, connect the power cord and switch on the printer. Leave the epson stylus photo 1400 printer to install the ink and get ready to print.
How to load paper into epson Stylus Photo 1400?
- Open the paper support and slide out its extensions.
- Open the front flap, then pull out the output tray and its extension.
- Press in the release button on the left edge guide and slide the guide to the left.
- Insert the paper, printable side up, against the right edge guide and behind the tab.
How do I load photo paper into my Epson printer?
Loading Paper in the Photo Tray
- Close the output tray, if necessary.
- Open the front cover.
- Pull out the paper cassette.
- Pinch the tabs on the photo tray edge guides and slide them outward.
- Load photo paper, printable side down, in the photo tray as shown.
- Slide the left edge guide to the edge of the paper.
Are Epson print heads replaceable?
Many of the other printer manufacturers built their printheads right into the ink cartridge, so you are basically replacing the print head each time you replace the ink cartridge. Epson, however, has a separate print head from its ink cartridges. If you need a WF 7620 print head, that’s what you need to buy.
Which way do you put photo paper in printer?
Place your photo paper in the tray with the glossy or printable side facing down. Hold the paper by the edges to avoid fingerprints on the glossy surface.
How do you check printhead nozzles?
You can check the print head nozzles using the control panel on your product.
- Load a few sheets of plain paper in the product.
- Press the up or down arrow button, select Setup, and press the OK button.
- Select Maintenance and press the OK button.
- Select Print Head Nozzle Check and press the OK button.