How do I set my carburettor?

How do I set my carburettor?

Part of 1 of 1: Adjusting your carburetor

1. Materials Needed.
2. Step 1: Remove engine air filter.
3. Step 2: Adjust the air fuel mixture.
4. Step 3: Observe the engine’s condition.
5. Step 4: Re-adjust air fuel mixture screws.
6. Step 5: Test the engine at idle and while revving.
7. Step 6: Locate the idle mixture screw.

How big is a 1977 Suzuki GS 550?

GS 550 1977 Overall Length: 2 175 mm (85.6 in) Overall Width: 850 mm (31.7 in) Overall Height: 1 155 mm (45.5 in) Wheelbase: 1 435 mm (56.5 in) Dry Weight: 196 kg (431 lbs) Engine type: Air-cooled 549 cc inline-4, DOHC, 8 valves. 49 hp (35,8 kW) / 9.000 rpm, 42 Nm / 7.500 rpm. Single front disc.

What kind of engine does a Suzuki gs550l have?

The last incarnation of the GS550L had a slim-line tear-drop fuel tank, and adjustable Full-Floater rear suspension, The 1985 GS550L came in Maroon and Black. Engine type: Air-cooled 549 cc inline-4, DOHC, 8 valves. 49 hp (35,8 kW) / 9.000 rpm, 42 Nm / 7.500 rpm.

How tall is the CARB on a Suzuki gs850?

Suzuki GS Series Carb Specs Float Height Illustrations CV Carb Jetting and Cleaning VM Carb Tuning Guide Fine Points Of CV Carb Internals Shimming The Needle Mikuni/Dynojet Conversion Spreadsheet Vance & Hines Jetting Recommendations(PDF-600k) GS850 Carb Specs: Measurements = mm (in.) Carburetor type = Mikuni BS32SS

Can you remove the top of a gs850 carb?

Remove the tops of the carbs. You might be able to just remove the four screws that hold the ‘dome’ on the top of the carb and lift it off. There is a soft rubber diaphragm right under it with a light-weight spring between it and the cap. Gently remove the diapragm, lift it out of the carb.

How manycc does a Suzuki GS550 motorcycle have?

Suzuki’s use of stylish and inexpensive variations has been commercially successful: last year the E models outsold the standard versions in all four displacement categories where they were offered-400, 550, 750 and 1000cc.

Suzuki GS Series Carb Specs Float Height Illustrations CV Carb Jetting and Cleaning VM Carb Tuning Guide Fine Points Of CV Carb Internals Shimming The Needle Mikuni/Dynojet Conversion Spreadsheet Vance & Hines Jetting Recommendations(PDF-600k) GS850 Carb Specs: Measurements = mm (in.) Carburetor type = Mikuni BS32SS

What should the vacuum be on a Suzuki GS?

Loosen the locknut between #1 and #2 cylinders, and adjust the vacuum to 11.25 in Hg (28.5 cm Hg) for #1 cylinder. Tighten locknut being careful not to move the set screw. Most Suzuki GS 4 cylinder bikes with stock airbox and exhaust draw greater vacuum on the two outboard cylinders vs. the inner two.

How to change cylinder number on Suzuki GS400?

Remove the screws in the balance ports on the carbs. On the GS1100, they were allen bolts; on the GS400: phillips head screws. Install the hose barbs in their place. Note: for twins, replace “cylinder #3” with “right cylinder” and “cylinder #2” with “left cylinder” in the next few paragraphs