How do I reset my Maintenance Minder?
Using this method, the only thing you need to use in order to rest the maintenance minder light is…
- Press the trip button until the oil life is displayed on your dash.
- Hold the trip Button down until the oil life flashes.
- Once it starts flashing release the trip button and press it again. That’s it.
How do I Reset my maintenance required light?
Press and hold the reset button until you see the oil life indicator (this says “oil life” and has a percentage). Resetting changes the percentage to 100. Let go of the button and press it again, holding it for 10 seconds. The oil life indicator and maintenance requirement light blinks. Let go of the button one more time and hold for five seconds.
How do I reset maintenance light on 2004 Toyota Sienna?
Press and hold the Trip Odometer Reset button, and turn the ignition switch to the “On” position If your car has START push-button , press the “Start” twice without touching the brake pedal. Continue to hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off.
How do you reset the maintenance required light on a Prius?
2015-2020 Prius (OIL RESET) Maintenance Required Indicator Reset STEP 1. Push the START BUTTON, don’t start the ENGINE (Accessory Mode Only) STEP 2. First Clear the System message by pressing the BACK Button on Driver Info Button.
What causes the maintenance required light to go on?
As we discussed earlier, the maintenance required light is triggered by mileage, and is concerned with regular car maintenance schedules. The check engine light is triggered by something that’s faulty in the OBD II system. The check engine light can go on for many reasons, including: Faulty or missing gas cap
How do you reset the Mant. required light?
- Turn ignition switch to the ON position
- Trip Display to TRIP A mode
- Turn the ignition switch to the OFF position
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
How do I reset the maintance light?
Here’s how you do a maintenance light reset: Put your key in the ignition. Turn the key to position one. This is the position just before starting the car. Push the trip meter reset button on the dashboard. Hold it down for a second or two. Continue to hold the odometer button for around ten seconds. The light should flash, beep, and then go out. Once off, release the odometer button. Start your car.
How can you reset the service light?
- but don’t start the engine.
- Press the button on the lower left part of the steering wheel. The display panel will tell you why the vehicle needs servicing.
- Find and press the reset button on the left side of the instrument panel.
How do you turn off the maintenance required light on a Toyota Sienna?
Turn your ignition key to the ‘ACC’ or ‘LOCK’ position. Press and hold the trip meter reset nob (next to your Toyota Sienna’s odometer). While holding the trip meter reset nob, turn the ignition to ‘ON’, but do not start your Toyota Sienna. Hold the meter reset until the MAINT REQD light switches off.