How do I change settings on One Touch Ultra Mini?

How do I change settings on One Touch Ultra Mini?

Put the UltraMini into Settings Mode: Press and hold the power button on the meter (the ▼ button on the front of the meter) for at least 10 seconds. If you have held the button long enough, you should see the time and date appear on the top right hand of the screen.

How do I set the time and date on a One Touch Ultra Mini?

Or, to change the time and date, start with the meter off, then press and hold ▼ for five seconds until the start-up test screen appears. After the start-up test screen, the pre-set time and date will appear on the display.

Why was the One Touch Ultra Mini discontinued?

Last updated on Dec 3, 2018. LifeScan has discontinued the manufacturing the OneTouch Ultra and OneTouch UltraSmart Meters, effective December 31, 2012. This action was taken due to a shift in demand from these products to the newer OneTouch Brand Blood Glucose Meters and not the result of any safety issues.

What does Error 5 mean on One Touch Ultra Mini?

 CAUTION: You may get an ERROR 5 message or an inaccurate result if the blood sample does not fill the confirmation window completely. See Troubleshooting in Section E. Discard the test strip and re-start the test process.

How do I change the date and time on my OneTouch?

Set time & date

1. From any Home screen, tap the All apps icon.
2. Scroll and tap Settings.
3. Scroll down to ‘SYSTEM,’ then tap Date & time.
4. Tap Automatic date & time.
5. Tap Off.
6. Clear the box next to Automatic time zone.
7. Tap Set date and enter the date.
8. Tap Set time and enter the time.

Is the One Touch Ultra Accurate?

Conclusion: The FreeStyle Flash and the One Touch Ultra are precise glucose meters; however, the FreeStyle Flash was associated with greater accuracy. Success rates of forearm glucose sampling were significantly greater when the FreeStyle Flash meter was used.

How to troubleshoot an OneTouch UltraMini?

Check that the temperature is between 43 degrees and 111 degrees.

Look at each of your test strips for any obvious damage.

Place the meter on a flat surface,while the OneTouch is reading your blood-glucose level,so you do not accidentally move the test strip.

How do you use One Touch Ultra 2?

There are 2 ways to turn on your One Touch Ultra 2 blood glucose meter. You can activate the unit either by pressing and holding the “OK” key for 2 seconds or by inserting a test strip into the top of the meter. Test strips should be inserted into the test port with the contacts at the bottom of the strip facing you.

What is One Touch Ultra?

The OneTouch Ultra is a small portable blood glucose monitoring system that can be used by patients suffering from diabetes. It consists of a meter, testing strips, and a control solution.

What is one touch supply?

One Touch Support (OTS) is a Naval Supply Systems Command (NAVSUP) web application, managed by NAVSUP Global Logistics Support (GLS) and sustained by the NAVSUP Business Systems Center ( BSC ).