How can you tell the polarity of a coil?
You can test for correct polarity of the ignition coil by using a voltmeter. Connect the negative lead to the (-) negative terminal and the positive lead to the engine block. Set the meter on the highest volt range (these connections are the same whether you have a positive ground or negative ground electrical system).
How are the ignition wires on a Dyna’s connected?
Crimp the connectors supplied with the kit on to the ignition wires. 11. One end of the primary of each coil should be connected together with the supplied jumper. The 12 volt wire from the ignition switch is also connected to that end of one of the coils. Connect the red wires from the DYNA S to that same end of one of the coils.
Can a Dyna twin coil be used with a dc6-4 spark plug?
The DC6-4 is used for all dual spark plug head applications. The Dyna Twin Fire coil can be used with any electronic ignition system that incorporates dwell control, but cannot be used with the DS6-2, Dyna S or similar ignitions.
How do you disconnect dyna’s from coils?
Disconnect the Dyna S wires from the coils. Connect the negative ohmmeter lead to the mounting plate and the positive lead to one of the coil (-] wires. This should read open [infinite ohms) on all ranges. Any other reading indicates a damaged output.
What kind of coils do you need for Dyna 4000?
DYNA IGNITION SYSTEM COIL REQUIREMENTS. DYNA 4000 Pro Ignition: Must use DC9-1 or DC9-2. The DYNA 4000 ignition system is designed for racing only and is matched to the characteristics of the DC9-1 coil for optimum energy production. Recommended – DC7-1, DC8-1, DC10-1, DC3-1, DC6-1.
Crimp the connectors supplied with the kit on to the ignition wires. 11. One end of the primary of each coil should be connected together with the supplied jumper. The 12 volt wire from the ignition switch is also connected to that end of one of the coils. Connect the red wires from the DYNA S to that same end of one of the coils.
Disconnect the Dyna S wires from the coils. Connect the negative ohmmeter lead to the mounting plate and the positive lead to one of the coil (-] wires. This should read open [infinite ohms) on all ranges. Any other reading indicates a damaged output.
How does the coil work on a Harley Davidson?
The coil consists of two winding’s of wire, the primary and the secondary. The primary receives 12 volts from the motorcycle and allows voltage to build; transferring voltage to the secondary winding where voltage is increased to thousands of volts and released through the spark plug wires to the spark plug.
Where is the spark plug on a Harley Davidson ignition coil?
The primary is the area on the Harley Davidson ignition coil where the wires from the motorcycle’s harness are connected. The secondary of the coil is the area/towers where the spark plug wires plug in. There are two types of coils used on most Harley-Davidsons. Dual fire and single fire. Dual fire coils send spark to both cylinders, all the time.