Do fuel injected Harleys need to warm up?
Carburetted models often require longer warm-ups, while fuel-injected Harleys need less time to warm up. If your Harley is an FI model, then there’s no need to disturb your neighbors with the noise your idling engine makes. Also, make sure you perform warm-ups the right way.
What temperature should my Harley run at?
about 160-220 degrees
Extremely hot! Motorcycle engine temperature can vary, but in normal circumstances, a Harley’s temperature should average about 160-220 degrees. If you are moving at high speeds or frequently idling, chances are good the engine is running on the hotter end of the spectrum.
What kind of engine does a Harley Davidson Fatboy have?
This Harley Davidson Fat Boy is powered by a 88 cubic inch fuel injected engine, paired with a five speed transmission. After going over the motorcycle that are no major dents or dings that I can find. Other than a few minor scuffs on the chrome, both the chrome and the aluminum on this motorcycle are in decent condition.
Where does fuel injection on a Harley Davidson come from?
The mighty Harley is slowly loosing its carburetor. For those of you who haven’t noticed or are stuck back in the 80’s, a large number of the bikes coming from Milwaukee have fuel injection installed. International environmental concerns have slowly forced the change from carburetor to electronic fuel injection.
Where is the fuel tank vent hose on a 1998 Fat Boy?
Discussion in ‘ Engine, Fuel and Exhaust ‘ started by nascar7613, Dec 21, 2016 . 1998 Fat Boy with split tanks builds pressure in the tank. I found that the hose going to the vapor valve is broken in the battery area. The hose goes to the vapor valve, but I can’t find the other end of it that goes to the fuel tank.
What kind of fuel does a Harley Davidson use?
I have a 2002 Roadking Fuel Injected,with 16000 miles, that acts like it is starving for fuel. The first mile I drive there is no problem, but then it starts to sputter and act like a clogged filter. It idles fine. I removed the fuel pump and checked the lines and the filter sock. No visible cracks and the sock was clean.
Where can I find a 2003 Harley Davidson Fat Boy?
You can list all 2003 Harley-Davidson FLSTFI Fat Boy available and also sign up for e-mail notification when such bikes are advertised in the future. Bikez has a high number of users looking for used bikes.
What kind of fuel injection does a Harley Davidson have?
In theory Harley’s fuel injection system is still an open-loop system by design. Article courtesy of American Iron Magazine The Harley-Davidson ESPFI system is known as a Speed/Density, Open Loop, Sequential Port Fuel Injection system, that controls both fuel flow, and spark timing. Let’s further explain these terms.
Discussion in ‘ Engine, Fuel and Exhaust ‘ started by nascar7613, Dec 21, 2016 . 1998 Fat Boy with split tanks builds pressure in the tank. I found that the hose going to the vapor valve is broken in the battery area. The hose goes to the vapor valve, but I can’t find the other end of it that goes to the fuel tank.
What’s the top speed of a Harley Davidson Fat Boy?
MCycle mentions that the bike has a top speed of 91.96 MPH and that it weighs 657 lbs. The Fat Boy is perhaps the most car-like of any Bike that we can think of. The suspension is so good you could probably ride directly over an open manhole and never notice.