Are tow bars removable?
A detachable towbar is just as safe and sturdy as a fixed towbar, with the added benefit of being able to remove the neck. A detachable towbar doesn’t affect your car’s appearance and is easy to use, remove and store. Detachable towbars have a safety lock so the neck cannot be removed.
How do you remove an X-Trail rear bumper?
The T30 rear bumper is super easy to remove, all you need to do is remove all screws of the rear mud-flaps (I think there are 3 of them on each side) and then remove the 2 main bolts holding the bumper in place on the tailgate side and then lift the whole bumper up to slide it off the alignment clips.
How to wire a Nissan T31 X Trail towbar?
NISSAN T31 X TRAIL TOWBAR WIRING HARNESS FITTING INSTRUCTIONS FOR Fitting Instructions: 1. Remove 2 piece luggage floor board assembly. Refer ( Fig 1A ). 2. Remove RHS luggage drawer and if fitted LHS luggage drawer. Refer(Fig 1B). 3. Remove LHS and RHS plastic press studs by depressing centre. Refer ( Fig 1C ). 4. Rotate both LHS and RHS locking
What is the towing weight of a Nissan X Trail?
For the Nissan X-Trail 2014 Onwards the maximum capacity nose weight is 100kg, nose weights are displayed under each tow bar below. Towing weight is the weight that the Nissan X-Trail 2014 Onwards towbars can tow safely, without damaging the vehicle, the maximum towing weight capacity is 2000kg.
Do you need a bumper cut on Nissan xtrail?
The only option on the Nissan X-Trail 2014 Onwards towbars is, None Visible Cut, a bumper cut is required . Nose weight is the amount of weight pushing down on the tow ball, it is important to not exceed the nose weight set on the tow bar, failure to do so could damage the car chassis and/or tow bar mounting points.
Who are the fitters for the Nissan tow bar?
We only use our own employed fitters to fit our Nissan towbars, we do not use 3rd party or sub contractor fitters. We have a great team of professionally trained NTTA fitters that will come to your home or work whichever is more convenient to fit your Nissan tow bar. It is important to match the electrics to how you will be using your tow bar.
NISSAN T31 X TRAIL TOWBAR WIRING HARNESS FITTING INSTRUCTIONS FOR Fitting Instructions: 1. Remove 2 piece luggage floor board assembly. Refer ( Fig 1A ). 2. Remove RHS luggage drawer and if fitted LHS luggage drawer. Refer(Fig 1B). 3. Remove LHS and RHS plastic press studs by depressing centre. Refer ( Fig 1C ). 4. Rotate both LHS and RHS locking
Where can I get a Nissan towbar for my car?
Nissan towbars by Towsure – UK suppliers of high quality EC-approved towbars. Towing brackets for your Nissan car come either as kits for self-installation or choose our professional fitting service – you can fit your own towbar with full instructions provided and high quality technical support available.
How to remove a bumper from an X Trail?
1. Remove mud flaps. 3 Torx screws in wheel well and underneath is 1 10mm screw and 1 plastic clip. 2. Remove part of wheel arch to access bumper bolt. Use medium flat blade screwdriver to pry under wheel Arch mould. (plugs will just pop out) be careful not to crease the wheel arch. Then remove 10mm bolt holding bumper on. TOTAL POSTS: (??) 3.
How to install anti rattle nut on towbar?
1. To install Anti-Rattle Nut and Bolt, finger tighten the M10 Nut (Item 13) up to head of M10 Bolt (Item 15). 2. Secure the M10 Bolt to the under side of the Towbar. Refer to figure 2. 3. When tightened, use the M10 Nut to lock the Bolt into position.