Why is the rear tail light not working?
neither the hand break lever or the foot lever are doing anything. The rear running light is not working either. I checked the connector at the rear tail light. It seemed ok, no rust or corrosion. I dident notice any breaks in the wire running under the rear fender. Under your seat there should be a 3 or 4 wire connector to the rear fender.
How do you turn on the tail lights?
Ask an assistant to hold down the brake pedal on the vehicle to activate the electrical system. If the vehicle has integrated turn signal-tail lights, you can set the emergency flashers or turn on the car’s ignition and headlights.
Where is the tail light on a Harley Davidson?
The blue wire (?) in the fender connector should be the tail light (running light). You should have 12Vdc there. Does your bike have the brake light harness that makes the rear turn signals brake lights also? Check under the seat for the wiring harness? neither the hand break lever or the foot lever are doing anything.
Why are my brake lights not connected to my trailer?
(Hard Wire Only) Vehicle has separate turn signal and brake lights, brake wire is not connected. Insufficient ground or short to ground on trailer or vehicle side. None of the trailer lights work for any functions. (Powered Converter Only) 12V power wire is not connected to vehicle battery.
Is there no power to left rear tail light?
Re: No power to Left rear Tail light or Number plate… If the bulbs are ok check for broken cable or bad earth. both tail and number plate lights are inter connected, so if the right tail is ok you have battery voltage to there, You can’t post conmments that contain an email address.
Ask an assistant to hold down the brake pedal on the vehicle to activate the electrical system. If the vehicle has integrated turn signal-tail lights, you can set the emergency flashers or turn on the car’s ignition and headlights.
Can a 12V battery be used for a trailer light?
A power drill will be used to install the screws for the ground wires. A 12V battery can also be useful for testing trailer lights in situations where you don’t have access to the vehicle or you suspect an issue with a particular trailer light. Trailer lights work except for one function: brake, right turn, left turn, or tail.
Why is my 7 way trailer not sending 12V?
The issue is that your truck is computerized even at the 7-way. It can sense when a trailer is connected based on the voltage draw so it won’t sent a signal for 12V when using some testers, especially LED testers because there isn’t enough of a power draw.