Why is my Remote key not working on my Grand Prix?
I own a 2007 Pontiac Grand Prix. My remote key isn’t working to unlock my doors sometimes, but it always opens my trunk easily when I press it. Sometimes I have to press the unlock button over and over to open the doors, sometimes it never works, or sometimes it works the first time.
What kind of remote does a Pontiac Grand Prix have?
The 2006 came in three variations; Grand Prix, GT and GXP, each with a larger engine than the last. The car also came with an optional keyless remote-entry system. With this remote you are able to unlock or lock the doors as well as set off the car alarm with the touch of a button.
What should I do if my Pontiac remote key is not working?
They don’t usually last too long. Changing out the guts is no harder than changing your battery. Ensure the two halves are completely snapped together and that the o-ring is in place when you put it back together. This will ensure it is water tight and you won’t have any issues going forward.
Why is my Remote key not working to unlock my doors?
My remote key isn’t working to unlock my doors sometimes, but it always opens my trunk easily when I press it. Sometimes I have to press the unlock button over and over to open the doors, sometimes it never works, or sometimes it works the first time. I don’t know what to do to fix it. It sounds to me like the fob contacts are giving up the ghost.
How to replace the keyless remote on a Pontiac Grand Prix?
To replace a Grand Prix keyless remote, you must purchase a new one from a retailer and then reprogram it using a working key for the car. Turn off the car, close all of the doors and remove the “Mall Pgm” fuse from the fuse block located under the hood of the car, near the battery. Sit in the driver’s seat and close the driver’s side door.
What kind of Keys do you need for a Pontiac Grand Prix?
A: The Pontiac Grand Prix has different types of keys. Some require programming, and some don’t. All transponder chip keys and/or smart key fobs need to be programmed. This process requires a special programming machine that only an automotive locksmith or the dealer has.
My remote key isn’t working to unlock my doors sometimes, but it always opens my trunk easily when I press it. Sometimes I have to press the unlock button over and over to open the doors, sometimes it never works, or sometimes it works the first time. I don’t know what to do to fix it. It sounds to me like the fob contacts are giving up the ghost.
When did the Pontiac Grand Prix vats key come out?
VATS Key: 1994 to 1996. Non-Transponder Keys: 1970 to 1999. Please keep in mind that while some keys or keys may look the same, they have different capabilities/frequencies/keyways. Therefore, having the right key is essential.
How to get a remote door unlock on Mopar?
Uconnect Care: 1) If you need to unlock the doors of your vehicle, contact Uconnect Care by calling 855-792-4241. o Note: The Uconnect Care agents are trained to help you with unlocking of your door (for example, in an accidental lock-out). All other Remote Services should be performed via the Mopar Owner Connect website
How do you lock a car with a keyless remote?
Hit the “Lock” switch on your driver’s side door and insert the key into the ignition. Turn the key to the “Run” position and aim the keyless remote at the steering wheel. Press and hold the “Lock” button for five seconds.
How to reset keyless remote transmitters in Jeep Grand Cherokee?
Climb into your Jeep Grand Cherokee with your keyless remote(s) in hand and your manual ignition key. Do not close the driver’s door. Hit the “Lock” switch on your driver’s side door and insert the key into the ignition. Turn the key to the “Run” position and aim the keyless remote at the steering wheel.
Is there a remote for the Jeep Grand Cherokee?
Shop AutoZone for Jeep Grand Cherokee Remote Keyless Entry. Notes: Black, 4 button. Without remote start
What kind of key do I need to program my Jeep Cherokee?
In other words, if you find your old key after programming the new one, it will not work. Therefore, we highly recommend having at least two new cut keys and program them both. B. There are a few transponder keys (Y160-PT, Y164-PT, FOBIK, Push to start remotes etc) that work on Jeep models.
Why is my Jeep Grand Cherokee key not working?
I have a 2014 Jeep Grand Cherokee and the key fobs don’t always work. They won’t unlock the Jeep or start it. When I open the door with the key the alarm always goes off and takes a few minutes for it to stop. I have states that the key has left the vehicle..
How do you unlock a Jeep Grand Cherokee?
1.Open the door, turn the key to the “on” position. 2.Lock the door. 3.Hold the remote next to the little black dome and hold unlock. The doors should unlock. This process may take a couple of tries.
What does it mean when your car remote is not working?
If your car key remote is working inconsistently, it is often a sign that there is an underlying issue with your car remote battery. In this instance, consistency refers to the way your car remote works with your vehicle.
What to do if your GM remote is not working?
If the display still does not appear, contact your nearest GM car care professional. Press the Set/Reset button until “Remote Key Learning Active” appears on the display. The Set/Reset button should be near the Vehicle Information button.
Is it possible to program a GM keyless remote?
If your car is a GM post-2010 model, you should contact your nearest car care professional. After 2011, most GM models have already synced transmitters that come with the car when you buy it. Once you determine which category your car fits in, programming a keyless remote becomes a very easy process, only involving a few quick steps.
Why is the remote start on my car not working?
If the ‘Check Engine Light’ or Malfunction Indicator Lamp (MIL) is illuminated, the remote start system will not work. Don’t panic, one of the reasons the MIL can illuminate is due to a loose gas cap!
What does a chime sound like on a GM remote?
You should hear a noise that sounds like a chime. This means that your transmitter has been successfully synced. If that does not happen, it is likely the sync is off, in which case you will have to restart the process. Repeat the previous step for each transmitter, up to four. Do this in rapid succession.
Why is the lock button not working on my Pontiac?
Since you say the trunk button works, and I bet the lock button works as well, this is a pretty good indication the unlock button doesn’t want to play anymore. As an intermediate step before replacing the clam shell, you can clean the contacts (rubber button side and electronics portion) with some rubbing alcohol and a Q-Tip type swab.
I own a 2007 Pontiac Grand Prix. My remote key isn’t working to unlock my doors sometimes, but it always opens my trunk easily when I press it. Sometimes I have to press the unlock button over and over to open the doors, sometimes it never works, or sometimes it works the first time.
They don’t usually last too long. Changing out the guts is no harder than changing your battery. Ensure the two halves are completely snapped together and that the o-ring is in place when you put it back together. This will ensure it is water tight and you won’t have any issues going forward.
Since you say the trunk button works, and I bet the lock button works as well, this is a pretty good indication the unlock button doesn’t want to play anymore. As an intermediate step before replacing the clam shell, you can clean the contacts (rubber button side and electronics portion) with some rubbing alcohol and a Q-Tip type swab.
Why is my key fob not working on my car?
The key fob may have some broken buttons or the battery could be dying out causing the buttons to not function. If the key fob has been dropped, a contact point inside the electronics on the key fob could have been broken causing the buttons to fail and short out with each other.
What are the buttons on my key fob?
On my key fob, there are five buttons. Lock, unlock, trunk unlock, alarm, and one that’s used in the remote start process. The lock and unlock buttons are the only ones that don’t get any response from the car. I can lock and unlock all four doors manually.
Why are my lock and unlock buttons not working?
My car has an automatic transmission. The key fob may have some broken buttons or the battery could be dying out causing the buttons to not function. If the key fob has been dropped, a contact point inside the electronics on the key fob could have been broken causing the buttons to fail and short out with each other.
What happens when your key fob is not working?
A faulty key fob is an inconvenience that can throw off your whole schedule. While it may seem far-fetched to think of your fob as needing regular maintenance, your key fob is not something to overlook because when it fails it can stop you from being able to enter your vehicle at all, let alone start the engine.
Why does my key fob not work on my car?
This video is based on the reasons as to why the key fob or keyless entry doesn’t work completely as in operating the lock, unlock, panic, trunk and door features all together. If only one button doesn’t work or your vehicle doesn’t start, well that can be relating to another issue.
What makes a car key remote not work?
In truth, car remotes are simple devices that simply rely on communication. Your car key remote is a miniature radio transmitter that sends signals to the corresponding receiver in your vehicle. Most car key remotes are primarily powered by lithium coin batteries. Car remote key not working? Here are some reasons why 1.
Where can I buy a car key remote?
Since the car key remote is powered by a battery, it only makes sense that dead battery is one of the reasons for car remotes not working. A replacement car remote battery can be purchased from local hardware stores like Home Depot or Lowes.
How to reset the theft system in a Pontiac Grand Prix?
Enter the vehicle and insert the ignition key into the ignition. Turn the ignition to the “ON” position but do not start the engine. Wait 30 seconds and start the engine. Verify that none of the security lights on the dashboard are flashing or illuminated.
How to order a GM remote start key?
Description: Requires 2 Keys with Remotes. Otherwise, order a coded key via gmspo.. This product requires: 13504259, 13501514. This product requires:… More Info Description: This product replaces 22997089.