Why is my AC clutch slipping?
A slipping AC compressor clutch is a sign of severe wear, shorted clutch coil or an incorrect air gap (explained later). The AC compressor drive belt rotates the compressor pulley at all times when the engine is running.
What would cause an AC clutch to not engage?
Why AC clutch won’t engage If the clutch doesn’t engage, the problem could be a blown fuse, an open in the wire to the clutch coil, a bad clutch coil, a poor ground, a low pressure switch lockout, or even a bad engine coolant temperature switch.
Can I drive my car with a bad AC clutch?
Your AC pulley is a free spinning pulley that has a clutch on it. It will spin freely until you turn the air conditioning on. If the clutch doesn’t work properly, you will still be able to drive your car.
Do AC clutches wear out?
As we just talked about, there is a decent chance that the AC compressor clutch will stay strong for many years to come without wearing out on you when you first get your car. But if it ever does give out on you and fail completely, it’s not going to be too difficult for you to tell.
Why does my air conditioner clutch not engage?
In a few cases, the clutch does not engage due to a clogged refrigerant circuit. If you want to diagnose an AC compressor clutch for defects, apply these techniques: Working Method 1. Set all air conditioning controls to the MAX before kicking off the engine. Check the front side of the clutch to examine its condition.
What to do if your Subaru clutch is not engaging?
Subaru outback , AC clutch not engaging ,super easy fix.. – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.
Why is the pulley not engaging the clutch?
Turn the air conditioning controls to MAX AC and start the engine. Then look at the front of the compressor clutch. Both the pulley and the clutch should be spinning. That means the clutch has properly engaged with the pulley. If only the pulley is turning, but the clutch disc isn’t, there’s a problem somewhere in the system.
How to manually engage AC compressor clutch, the easiest?
There is no need to switch on the air conditioning system for this method to work. Tips – You should route the jumper wire to avoid it getting tangled or interfering with other moving components. It is an ominous sign when the clutch engages but the compressor does not spin. Changing the compressor clutch could be the only solution in this case.