Why does my Yamaha R1 bike not start?
When i go to start the bike the relay clicks away fast, and the speedo gages go blank for a second or two. I have 12.96 volts in the batery befor i tun the key on, turn the key it goes down to 11.0, then i try to start it and the relay clicks away and it goes down to 7-6 volts .
Why does my car not start when I Turn on the key?
This feature is not available right now. Please try again later. One possible reason your car wont start is a bad connection. This is one of those things that is often over looked until after the battery or starter or alternator have been replaced or all of the above. if this happens to you check your battery connections. Loading…
How to diagnose no start, turn key and nothing happens?
Spark (Only gas engines need a spark, diesel engines need high compression and glow plugs in cold weather to start) Compression (without compression the engine will not run, or not have any power) To read my article where I really lay out the FastC method of diagnosing any no start condition read here.
Why does my steering wheel not turn when I turn the key?
Turn the Steering Wheel The most common reason that a car key will not turn is that the steering wheel has locked. This will happen when the steering wheel has been moved after the key has been removed from the ignition cylinder. Turn the steering wheel to the right and left.
How to fix worn ignition on Yamaha R6 R1?
Yamaha R6 R1 worn ignition with immobilizer new red key cut stiff turn sticky problem – YouTube I cut new keys for a customer that lost ALL of his existing motorcycle keys by extracting the immobilizer code out of the ECU and programming and cutting a n…
Where does the POS Cable go on a Yamaha R1?
There will be one cable that goes to the battery pos post,you want the other one.You will want to attach the pos cable from the jump box to this cable and the neg cable to batt neg.
Why does my Yamaha Star Stryker have no power?
I think a guy on the Raider site had a problem with that (blown fuse on it after mods) and since the installation of that changes the power routing it could be the issue (if installed). Other than that, you’d have to go step-by-step, last place you have power to next place you should.
When i go to start the bike the relay clicks away fast, and the speedo gages go blank for a second or two. I have 12.96 volts in the batery befor i tun the key on, turn the key it goes down to 11.0, then i try to start it and the relay clicks away and it goes down to 7-6 volts .
There will be one cable that goes to the battery pos post,you want the other one.You will want to attach the pos cable from the jump box to this cable and the neg cable to batt neg.
What should I do if my motorcycle won’t start?
Unless you have one of those new all-electric motorcycles, your bike needs three main things to run- Spark, Fuel/Air mixture and Compression. Your bike will either run rough or not start at all without the proper amounts of any of those elements.
I think a guy on the Raider site had a problem with that (blown fuse on it after mods) and since the installation of that changes the power routing it could be the issue (if installed). Other than that, you’d have to go step-by-step, last place you have power to next place you should.