Why does my radio not work after a battery disconnect?

Radio doesn’t work after battery disconnect – YouTube After changing your car battery the radio will not work. You did it the wrong way. So now you need to reprogram the radio, and you don’t want to break your b… After changing your car battery the radio will not work. You did it the wrong way.

When do you enter the car radio code?

Some car radios come with an anti-theft feature that kicks in whenever they lose battery power. This feature typically locks the unit up until the correct car radio code is entered. The code is almost always specific to not only the make and model of the radio but also to that specific unit.

How do you enter your Honda security radio code?

Normally, you can activate your radio’s battery by pressing and holding the power button for about 2 seconds. However, this method will not always work. If your radio cannot be reset, you will need to enter your Honda radio codes. How do you find your radio security code?

How can I bypass the code on my car radio?

Press the SETUP button, then select Bluetooth, then select Bluetooth Connection. On the Bluetooth Connection screen, select Delete Devices and then choose the device that you would like to delete, then select Delete. How can I bypass the code on my car radio?

How to get anti theft code after battery disconnect?

For the vehicles that are equiped with power net or NTG4 radios. If the Telematics Gateway Module (TGW) or the radio have been removed or replaced. A four digit security code is required in order for the radio to function: The key must be in the “RUN” position. Press the “ON/VOL” control button.

Why does my Honda radio lock up after battery is disconnected?

After a silent drive home I researched what had happened and found out that newer Honda radios have a theft-deterrent feature whereby after being disconnected from the battery they “lock up” and won’t work again until a security code is entered. My owner’s manual told me I should have received this code number with my owner’s manual kit.

Why does my Honda radio Say enter code?

No radio- no AM, no FM no Bluetooth Audio- all I got was the mysterious message- “Enter Code.” After a silent drive home I researched what had happened and found out that newer Honda radios have a theft-deterrent feature whereby after being disconnected from the battery they “lock up” and won’t work again until a security code is entered.

How do I enter an anti theft code on my Radio?

A four digit security code is required in order for the radio to function: The key must be in the “RUN” position. Press the “ON/VOL” control button. The word “CODE” or ” Please enter Anti-Theft Code” will appear on the display.

Is it possible to fix a car stereo that quit working after the battery died?

And it probably isn’t. In most cases, fixing a car stereo that quit working after the battery died is a lot simpler than that. Of course, it can also be a lot more complicated. There are a few different reasons for a car radio to stop working after the battery has gone completely dead.

What happens when the radio and lights don’t work?

But when a car owner attempts to turn on the engine and the attempt fails, yet the radio and lights still work, it can lead to confusion. This is particularly true among motorists who aren’t very well-versed in the issues that can occur with vehicles that could lead to such problems.

What should I do if my car radio stopped working?

That means car radio codes almost overwhelmingly become headaches for the lawful owners of those car radios, instead of the thieves they are meant to inconvenience. The best way to deal with a car radio code is to not deal with it at all.

What to do if your radio doesn’t have a security code?

If your radio doesn’t have a security code, and all the fusible links and fuses check out, you’ll have to do more diagnostic work to figure out what’s going on. Car radio codes are meant to act as a sort of passive anti-theft feature.

Why is the radio not working on my Ram truck?

The radio is “married” to the trucks vin# which it reads through the CAN bus network. A replacement radio needs a code but not the one that was installed from the factory. It’s possible something else went wrong but that’s how mine has worked each time I disconnect my battery. Others have confirmed this. Ouch, sorry man.

How to change your car battery without losing your radio?

How to change your car battery without losing your radio code and dashboard setting. HD – YouTube How to change your car battery without losing your radio code and dashboard setting. HD If playback doesn’t begin shortly, try restarting your device.

What happens if you enter an incorrect radio code?

If an incorrect code is entered, the word “SAFE” appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour.

What happens to a GMC radio if battery dies?

Chevy and GMC vehicles both feature Theftlock radios which render the stereo inoperable to would-be thieves. The downside of the Theftlock system is that if your battery dies or becomes disconnected, you’ll need to enter the radio code to deactivate the Theftlock system.

What happens if you hook up a battery to a ground cable?

This is why the final cable you hook up should always be a ground cable, and it should be hooked to ground, rather than the battery. If you hook directly to a battery, and any hydrogen gas has leaked from the battery, the resulting spark could ignite the gas and cause an explosion.

How to reset my Honda radio after putting in a new battery?

Step 1 Turn the ignition key to the “On” position, but don’t start the engine. Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display. Release the power button when the display lights up and the radio turns on.

What to do if your car stereo battery dies?

Car stereos with a code feature require you to input a preset code any time the battery dies or is disconnected. The code may be in your owner’s manual, or you might have to contact a dealer. Electrical system components can be damaged during a jump start if precautions aren’t taken.

How to run cab radio off of cab battery?

The battery switch by the coach door needed to be turned on. BUT…..one would normally run the cab radio off of the CAB battery. You should check the position of THAT switch too. Thank you everyone. The battery switch by the coach door needed to be turned on.

Why does my radio not work in my car?

For instance, if your radio turns on and displays a station, but no sound comes out of the speakers, then it’s probably an issue with the speakers or the wiring or even the antenna. In that same vein, a car stereo with a non-functioning radio may be tracked down to an antenna problem if other audio sources, like the CD player, work just fine.

What to do if your Honda CRV radio does not work?

For 2016 crv if you change the battery and the radio does not come back on start the car and give a minute and then press and hold the power button until you here the beep. That will restart the radio identifying the radio is still in the car.

What should I do if my car radio won’t work?

Apply 12 volt power to the vehicle either through the data link connector under the dash or by jumpering wires to a battery powered circuit at the fusebox or other connector. Always verify that all electrical devices and systems operate properly before releasing the car to the customer. Sounds like they failed on all three.

Why is my 6 disc CD changer not working?

However, this past weekend we changed her battery for a new one. Since then, my stock 6 disc cd changer no longer works. It makes a clicking noise as though it is trying to retrieve a disc, but it keeps saying “MECHANICAL ERR”. Then a few seconds later it says “EJECT DISC”.

Why is my Chevy TheftLock radio not working?

The radio display will read “LOC” and the device will not turn on. Whenever your Chevy battery is disconnected or the battery dies, the Delco Theftlock radio enters the “LOC” mode. Follow these steps and you can reset the anti-theft radio and return the radio to a working state.

Why is my 6 disc CD player not working?

Those codes are common on Hondas but nissans do not have them. Unfortunately the factory 6 disc CD players are known for going out. Hope you find a fix. Known for going out? Where are you finding that information?

Why did my car radio stop working after the battery died?

In most cases, fixing a car stereo that quit working after the battery died is a lot simpler than that. Of course, it can also be a lot more complicated. There are a few different reasons for a car radio to stop working after the battery has gone completely dead.

What to do when your car stereo stops working?

First, your battery went dead, and now your car stereo is dead, and it’s really shaping up to be just one of those days. So you drive the rest of the way to work in silence, and you hope that the next step isn’t going to be buying a brand new car stereo. And it probably isn’t.

What should I do if my Radio is not working?

^^^^ Don’t even try that (disconnection at the battery). The correct way to do it as hinted by @atlcarl69 is to simply unbolt the big black battery negative lead from the ‘jump-start post’ over the fuse box near the driver side under the cowl. You never touch the battery, don’t even remove its cover.

Why does my clock radio not turn on?

If you have a clock radio and the clock is not running but you are sure power is getting to the system, one of the wires from the clock or clock switch may have come detached from the radio circuit. Radio won’t turn on. Sounds like something rattling inside. One of the tubes came out of its socket. Usually the 50C5.

Why is my Honda Civic LX radio not working?

2004 Honda Civic LX, radio/CD not working. I disconnected battery recently to change headlamp bulb. Codes began to show up. Each time I punch a station select button another code, i.e., “1 Code”, “2 Code,” “3 Code”.

What kind of car won’t start after a radio change?

My car won’t start after my husband changed out the radio pls help! I have a 2007 Jeep Compass. My husband changed out the radio today and then the car wouldn’t start. It will turn over and over and over, but will not start. Any advice is appreciated!

Can a Crutchfield cable be plugged into a radio?

If he used a crutchfield cable, you usually don’t need to cut anything – just plug the thing into the car’s cable, plug the other end into the radio. If he needed to cut anything, something went wrong, I bet. If the ECM is located near the radio, perhaps he jostled one of its connections loose while working on the car.

What should I do when I Disconnect my car battery?

Use a settings keeper that will save computer codes, radio settings and other settings normally lost when disconnecting the vehicle’s battery. Most of these small units plug in to the cigarette lighter or the optional 12-volt plug-in port on many vehicles.

How to properly use a battery disconnect switch?

Battery disconnect switches can be toggled by moving them from the “on” to “off” position and vice versa. Other models may require a simple push of the button to activate. Aside from being activated in different ways, battery disconnect switches can also vary in terms of their security features.

How to reset a computer by touching the battery cables together?

Does touching the battery cables together to reset computer? 1 Clean any corrosion off of the battery and terminals with a can of spray-on battery cleaner. 2 Hold the positive and negative cable ends together so they’re touching each other but not the battery. 3 Wait five minutes for the diagnostic information to be erased.

When to remove the batteries from a radio?

If you are not going to be using the radio for a long time, or even if you think you might not use it for awhile, remove the batteries. This is true of any electronic device that uses the typical alkaline AA or AAA battery. Some batteries will begin to leak when they remain inserted without use for a long time.

Why are the batteries in my portable radio corroding?

When they begin to leak, the battery terminals themselves will corrode and will eventually be ruined. It’s a disappointing sight to see battery corrosion and that white fluffy stuff in the battery compartment of a nice portable radio. The reason I am posting this is due to a recent experience.

Why is the Scan button on my Radio not working?

Even the scan buttons under the display didn’t work. It was stuck, so I turned it off by pressing the middle dial button. Checked fuse 67 one more time as I worried that maybe not connecting it properly blew it but it’s still fine. Tried to turn the radio back on and now there’s nothing, so sound whatsoever, none of buttons are working.

What happens when you disconnect the battery on a ram truck?

Was on the phone with U-connect so they suggested to disconnect the battery. When I did this it seems to have disabled the truck. When I get in it acts normal but, when I go to push button and brake nothing happens. Lights etc come on but, that’s it. Also now I can’t lock or unlock the doors from my remote key.

What happens if you enter the wrong code on a radio?

Another says if I use ten incorrect error code entries radio will be toast.) If you enter the wrong code too many times, it will lock you out permanently. Disconnect the battery for a few minutes to reset the lock out, then try the code again. Make sure you’re using the code in the owner’s manual. 93 people found this helpful.

When do you need a radio unlock code?

Operating the unit will require a “secret stereo unlock code” known only by the owner. A radio code is required if you have: Experienced a dead battery. Disconnected the factory radio harness. Disconnected the battery to thevehicle. Click on your vehicle below to retrieve code now!

How do I get my radio code back if I lost it?

You must have the code, it’s 5 digits long and would be next to impossible to enter at random. If the code has been lost, the only other way to get it back is from Honda, by providing the VIN number of the vehicle and the serial number of the audio system.

Can a CD player be plugged into a car stereo?

Versatility: Some personal CD players can be plugged into a car stereo, which is useful if yours only has a radio or cassette player. Did you know? Most portable CD players have a small display screen that lets you see the track number and other useful information.

What kind of battery does a portable CD player use?

Some use regular AA or D batteries; others have proprietary battery packs, either internal or removable. Portable CD players with internal battery packs tend to recharge using a USB cable, which may or may not be included. The main point of a portable CD player is that it’s just that – portable.

How do you get a CD out of a CD player?

Inserting any objects into a multi-disk changer risk further damaging the mechanism. Step 1: Wrap two-sided tape around the popsicle stick. Make sure the tape is thin enough so that you can still fit the stick in the CD player. Step 2: Insert the stick in the CD player. Insert the taped stick about 1” inch into the CD player and push down.

What to do if your CD player won’t eject?

Try to eject the CD normally. If the CD player still refuses to eject the CD, try replacing the CD player’s fuse. Step 1: Locate the fuse box. The fuse box should be under the dashboard on the driver’s side. To replace the fuse, find the corresponding fuse for the CD player.

How do you remove a fuse from a CD player?

To replace the fuse, find the corresponding fuse for the CD player. Usually the fuse box has a front panel which shows the locations of each specific fuse. Step 2 Remove the correct fuse. To remove a fuse you’ll want to use a pair of needle-nose pliers or a fuse puller. Fuses can sometimes be difficult to remove.

Which is the best battery powered CD player?

Megatek CB-M25BT Portable CD Player Boombox with FM Stereo Radio, Bluetooth Wireless & Enhanced Sound, CD-R/CD-RW/MP3/WMA Playback, USB Port, AUX Input, Headphone Jack, LCD Display, AC/Battery Powered . CD players are essential in helping you find the perfect music album.

Can a car battery drain with the negative cable disconnected?

Leaving the battery hooked up will drain it at 20% or more per week! In this article I’ll dive into how a car battery will still lose some of its charge despite disconnecting the negative cable and best practices for keeping your battery ready to go when you returned to your vehicle.

Why does my car battery drain while driving?

Sometimes, though parasitic drain exceeds what is normal, and can cause car battery drain. If your charging system isn’t working properly, your car battery can be draining even when you’re driving. If your lights, radio, and other things are running off your alternator, your car battery will drain and you could end up with car battery failure.

Why is my car radio draining the battery?

Heck, just disconnect the negative battery connector, the next time you park it. Then, hook it back up when you’re ready to drive it. If it is the battery, you’ll know right now! By the way, a leaky diode in the alternator can cause the parasitic draw to increase too.

How can I Stop my Car Stereo from draining my battery?

Simple as that! Just stop using your stereo system or any other battery draining application on your car’s battery. You should always ignite your engine first, let the alternator do its work and it won’t strain your battery. No one wants to listen to the beats coming out of your car from miles away. Just try to keep it to yourself.

How much power does a radio clock drain?

A clock in the radio draws as little as 0.01 amps, whereas the combined interior lights can exceed 1 amp. That seems like a tiny amount, but a single incandescent dome light pulls enough power to drain a battery in one day.

What does it mean when your car radio doesn’t work?

When It’s Just the Car Radio That Doesn’t Work. If your radio doesn’t work, but you can listen to CDs, MP3 players, and other audio sources, then the problem is either related to the tuner or the antenna.

What to do if your car radio is broken?

It’s to render the radio useless for car radio thieves. If you’ve recently had to deal with a dead or disconnected car battery, your radio may be in anti-theft mode. Your radio may be flashing “code” or another message, or it may remain blank. The good news is that it’s a super easy fix.

Can a hard reset on a VW radio work?

Even though the hard reset doesn’t make the radio start working again in most cases, a few VW owners have reported that this booted their radios back into working order. It’s so easy that it’s worth a try. If the hard reset doesn’t work for you, check the fuse box and replace any blown fuses.

How to fix a problem with a CD player?

Solutions to Common CD Player Problems 1 Solution. Most of the time, this simple step helps you in restoring back your player back to its normal self. 2 Solution. Check if it is getting proper power supply. 3 Solution. To start off with the troubleshooting process, you need to first remove the case of the CD player.

Why is my car radio not working after a new battery?

Today the dealership did a tuneup, replaced the timing belt, and put in a new battery. I started my car and the radio did not work. They went out and reset the radio but said it would not reset, they check the fuses and said they were all good.

Why does my Ricks free auto radio not work?

The radio may have been damaged by the electrical spike or may be locked up. Try disconnecting the battery terminals with the M12 fuse in place. Touch the battery terminals together to drain the radio capacitors. Then reinstall the battery cables. If the radio works, the problem was simply logic lock.

Why does my car radio not work after a jump start?

The radio may also be damaged if the current battery goes dead and you replace it without removing the fuse. If the radio doesn’t work after a jump start or a battery cable disconnect/reconnect and you find a U0184 trouble code, it means the digital data bus has lost communication with the radio.

Why do I need an unlock code for my Radio?

An unlock code will allow you to set your radio and navigation system back up after your battery has died or been disconnected. Your radio or navigation system requires this code as an anti-theft function. Finding the Right Information to Reset the Radio Code by VIN Number

What to do when your radio won’t work?

> popular one). I remembered half the code, now I had the keystroke > that left the other half of the code to guess. I did it on the 7th guess. > now written the code in a safe place (not in the car!) > bonnet. In many cases, the radio has been removed or replaced from the > original.

How do you change a car battery without losing the radio code?

Put the clamp back in place and tighten the bolt (s) that hold it in place. Fire up the car to ensure that the new battery has been successfully fitted. Now try the radio. If you have follwed this guide correctly, the power to your radio will not have been cut and your radio will not require programming with the radio code.

How long does it take to reconnect a car battery?

Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds. Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.). Switch on the side lights through the driver’s window. Switch on the ignition and check system’s functionality. Hold lock button on key down for 10 seconds.

What to do if your car radio is not working?

Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.). Switch on the side lights through the driver’s window. Switch on the ignition and check system’s functionality. Hold lock button on key down for 10 seconds. Remove key open & close door test central locking system. Start the engine and complete the system’s check.

What happens when you disconnect the battery from a car?

Nothing should lock up on you when disconnecting the battery, sometimes the vehicle will need to relearn some items such as idle speed and transmission shift parameters if the battery is disconnected for long periods of time.

What happens when you disconnect the battery on a Silverado?

If you do disconnect the battery for any extended period let the truck idle for a few minutes after reconnecting the battery. It gives everything time to relearn the things mentioned above. No worries. The only strange thing that I personally have experienced . When I replaced the battery on my silverado the air conditioning doesn’t work.

Do you need to disconnect car battery to remove?

So to be safe, when working with car electronic appliances, disconnect battery terminal. No you don’t, I don’t think I ever did. If your car is off then your speakers should be off, the radio technically except unless it has other functions or another screen that might interface with it but the radio itself should be off.

How to do battery disconnect reconnect reset procedures?

Someone with some time and extra compassion lying around, provide a solution so that when you tell some to search “reset procedure” they will hopefully get THIS post in their top 10 search results. I found this while looking around at an unrelated search. This tells the steps, but not necessarily how to do them.

How to reset the battery in a Mercedes?

As for the gearbox, it is an adaptive gearbox and will “learn” your driving style as you drive it.Many people have tried this reset procedure,myself included, and found no difference but here it is anyway. Push the gas pedal right down to the floor and hold for 5 seconds. Turn the ignition off then release the pedal.

Why does my Mercedes medic draw so much battery?

A radio receiver in the car continuously listens for wake up signal from the key. As the car receives a signal in the assigned frequency it wakes up to validate the key. This causes current draw for several seconds. If the car is left parked in high pedestrian traffic areas this could be a problem.

How to reset a Mercedes Benz after a flat battery?

How to Reset a Mercedes-Benz After a Flat Battery. 1 Step 1. Insert the reset tool into the Mercedes’ data-link connector, which is near the hood-release latch. Turn on the ignition. 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5.

What to do if your Cadillac radio stops working?

So anytime you have any radio problems just unhook the battery to clear the radios memory. I have a 1994 Cadillac Coupe Deville. Radio is on but it will not power to the stations (cassette player) the antenna won’t go up either. I tried the unplugging the battery. Did not work.

Why did my radio stop working on my Eldorado?

No clue why, just figured it was one of those Caddy quirks it has happened maybe 3or 4 times in the 5 years I owned it. We have two people here with radio problems, one with a 2002 Eldorado and one with a 2000 Deville DHS. For each of you, please run your OBD codes and post them here.

What to do if your Mercedes Benz Radio is not working?

For you to do that, you will need to remove the fuses for the CD Changer, COMAND/ NAV / DVD Player / Radio, Audio Gateway AGW, and the Voice Unit if it is equipped with one, for at least 10 minutes. Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order.

Why is my car radio display not working?

Your car radio may have damaged connectors that are not able to transmit power and information to the display LED, and it is not able to work. There can be several possible reasons that can cause the connectors of the LED to stop giving power. The main reason for the damaged connectors can be a loose connection of wires of the connectors.

Is there a way to fix a blank radio display?

It seems to be a common problem, and there are company’s around that can fix the ‘Ford blank radio problem’. It seems like it would simply need to be resolder inside somewhere. Does anyone have knowledge on how easy it is?

Can a Ford F250 have a blank radio display?

My friend has a 2012 F250 and the radio display is blank. It seems to be a common problem, and there are company’s around that can fix the ‘Ford blank radio problem’. It seems like it would simply need to be resolder inside somewhere.

What happens to the clock when the battery is disconnected?

• Reset the clock to the correct time. The engine electronic control system automatically adapts to certain characteristics of the vehicle. When the battery is disconnected, these adaptations are lost.

What to do after battery has been disconnected?

1. NOTE: After the battery has been disconnected it is necessary to up function. further two seconds. 2. Release the window control switch. 3. Operate the window control switch in the closed position and continue to operate the window control switch for a further two seconds. 4.

Is it dangerous to disconnect an alarm system?

Alarm systems are designed to be in a constant power-on status; your house power is permanently applied, so you are working on a live system. All of the voltages are low voltage/current and are not dangerous. However, you should be careful that you do not short out the terminals or other electronics or you may damage your system.

What to do when RDP session disconnects?

Every time I changed anything in the local group policy, the RDP session would forcefully disconnect. The solution is the registry entry needs to be applied locally so the fDenyTSConnections=0 is the default that is used when reprocessing group policy. Was this post helpful?

Why do USB ports keep disconnecting and reconnecting?

How to Fix USB Ports Keep Disconnecting and Reconnecting Windows 10 Solution 1: Reinstall the Universal Serial Bus Controllers Driver. A driver issue can be the reason for USB devices… Solution 2: Turn off the Power Saving Option. Some users say that they solve USB keeps disconnecting and

Why does remote desktop disconnect after a period?

My frustration is that something is causing Remote Desktop sessions to just abruptly disconnect after an arbitrary period.

What to do if you can’t find the radio code?

If this is the case for you, then excellent – all you need to do is enter the code on the radio, and you are good to go. However, there will be times when the radio code is nowhere to be found. If this is the case, there are a few things you can do. However, there is some information that you are going to need before you can get started:

What happens when you reset the radio code?

Anyone who does not know the radio code can’t operate it if it is removed from the car. However, the radio also goes into this mode whenever the battery is disconnected, an electrical fuse is blown or you disconnect the radio from the current supply. You may need to reset the radio if this happens.

Is there a way to reset the radio code?

Depending on the type of radio you own, they might be able to reset the stereo code for you. Once you’ve received the security code, it’s relatively easy to enter the code to disable the security function. Most of the time, the code is adjusted by turning the volume or tuner knobs, or preset buttons.

Do you need a code for a 55 plate radio?

what year 407 ?, mine is a 55 plate and have no problems when the battery has been disconected. Share this content via… You shouldn’t need a code, these radios are usually coded by the VIN number to the car. If you take it out and try and fit it to another it works but makes an annoying bleeping noise every two seconds.

Do you need a radio code for a car stereo?

Radio codes protect your stereo system from thieves, but if you’ve removed your stereo from your vehicle or disconnected the battery, you’ll need to enter your radio code for the stereo to function again. Your radio code is printed on a small card and included with your owner’s manual.

What do you do when your radio code is 1000?

Radio is on and appears in “SAFE” mode. Simultaneously press the P.SCAN and RBDS buttons, holding them down, until “1000” lights up. Release the buttons. (If you continue to hold the button down or press the buttons again this will make the radio think your radio code is 1000, so don’t do that)

Normally they charge for this but in your case, since they changed the battery, they should do this for free. You might find a small tag somewhere in the bottom of your glove box with the reset code on it. The radio is almost 8 years old. If the radio is busted, don’t have the original fixed.

What should I do if my car battery loses power?

If proper battery replacement practices were followed then the radio, clock, or anything else on the car would never have lost battery power. There are a few rules for replacing a battery: Always make sure the radio and any other electrical devices are switched off before beginning.

Why does my car radio not recognize the VIN?

When the battery was disconnected it caused the radio not to recognize the VIN. Try turning the ignition key to run position so the dash lights come on for ten minutes to see the radio recognizes the VIN so it works again. +1 for @Tester and break out the owner’s manual.

How to reset the radio after a battery replacement?

This function is designed to prevent theft of the radio. Replacing the battery will also trigger the lock mode. The radio can only be reset by entering the security code that came with the Freestyle. If you no longer have the code, contact a Ford dealer to have them provide it for you.

Where can I find the reset code on my Radio?

If its the OEM radio, the dealership should be able to look up the reset code based on the VIN. Normally they charge for this but in your case, since they changed the battery, they should do this for free. You might find a small tag somewhere in the bottom of your glove box with the reset code on it. The radio is almost 8 years old.

How do you connect a 12 Volt Radio to a car?

Always make sure the radio and any other electrical devices are switched off before beginning. Apply 12 volt power to the vehicle either through the data link connector under the dash or by jumpering wires to a battery powered circuit at the fusebox or other connector.

What to do if you have electrical issues after replacing a battery?

If you’re experiencing electrical issues immediately after a battery replacement or disconnect, make sure the battery cables were re-attached and tightened down properly. Herculean strength isn’t necessary, but the cables should be snug and not move around or come off of the battery posts.

What to do when your car radio stops working?

Just disconnect the ground from the battery for 30 seconds. BTW this might be a good time for you to disconect the + cable also & give it a good cleaning. upon re-connecting everything, the radio should be fine. Thanks all for the excellent information and responses. All it ended up requiring was a disconnect of the negative battery cable.

Navigation