Why does my Mercedes-Benz ml-320 shut off?

Why does my Mercedes-Benz ml-320 shut off?

2009 ML-320 – same problem but happens very rarely, often a month between. Drive 30 minutes with a lot of stop and go. Try to restart a few minutes later, the starter turns over 10 seconds and then stops. Wait 10 minutes and it starts and works perfectly. I replaced the crankshaft sensor a few months back and it has happened twice since then.

Can a car fan still run after the engine is turned off?

Then you notice the engine cooling fan is still running even though the car is turned off. It is ok for the engine cooling fan to keep running for a few minutes after turning off the car. Your car fan will run for a few minutes after you turn off the car then turn off. This is normal in many vehicles, such as BMW or Mercedes-Benz.

What happens when you restart a 1999 ml430?

I own a 1999 ML430, and the one anomally that I experience is that when I try to restart after it dies, the ignition goes into a continuous crank. It gets stuck in that mode and continues to crank unsuccessfully. Do you also experience this?

What to do if your Mercedes Benz fan is stuck?

Not hard to do, just drop the blower motor and replace the regulator. The hardest part is positioning your self under the dash and looking upwards to locate the mounting screws. Hi Paul, just wondering if you found a solution to your stuck fan.

Why does my Mercedes E320 fan not shut off?

Mercedes-Benz E320 The fan motor wont shut off when ignition… The fan motor won’t shut… The fan motor won’t shut off when ignition is turned off Show More Show Less Ask Your Own Mercedes Question Share this conversation Answered in 2 minutes by: 10/14/2011 Mercedes Mechanic: Marty, Mercedes Technician replied 9 years ago

Then you notice the engine cooling fan is still running even though the car is turned off. It is ok for the engine cooling fan to keep running for a few minutes after turning off the car. Your car fan will run for a few minutes after you turn off the car then turn off. This is normal in many vehicles, such as BMW or Mercedes-Benz.

What happens to the fan motor when ignition is turned off?

The fan motor won’t shut off when ignition is turned off The fan motor won’t shut off when ignition is turned off – Answered by a verified Mercedes Mechanic We use cookies to give you the best possible experience on our website.

How can I stop the Mercedes blower motor?

Otherwise you will need to remove the panel under the passenger side dash and access the regulator and disconnect it. Unfortunately there are no fuses that can be removed to stop the blower motor. Marty, Mercedes Technician Category: Mercedes Satisfied Customers:57,126 Experience: Bosch Certified Master Tech. Over 35 years experience. Verified

Why is my Mercedes Benz M class not starting?

I took it to autozone and it said the EGR Valve was bad. It was replaced yesterday and today when I drove my car, it shut off while I was driving it and now it won’t start. Just had the crankshaft position sensor replaced today and now my SUV has started and will post if the problem still happens.

What are the problems with a Mercedes Benz?

Top 5 Mercedes-Benz no start problems 1 Engine Click, No Start 2 Engine Dies Right After It Starts 3 Car turns over, but it won’t start 4 The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery 5 Key will not turn the ignition More …

Why is my Mercedes Benz ML320 not starting?

The ML also has some issues with the ignition switch and with the fuse box and wiring. The only way to be sure is to have a voltage check done at the starter. If the starter is getting a signal from the ignition switch and if the battery is fully charged and the cable connections are all good then the starter will need to be replaced.

What should I do if my Mercedes Benz won’t start?

Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.

Top 5 Mercedes-Benz no start problems 1 Engine Click, No Start 2 Engine Dies Right After It Starts 3 Car turns over, but it won’t start 4 The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery 5 Key will not turn the ignition More

Why does my Mercedes not start when I charge the battery?

This Mercedes-Benz is not starting because of a low battery. In this case, what you need to do is trickle charge your battery using any of these 12 volt battery trickle chargers. If you need help read this article on How to charge a Mercedes-Benz the right way. Mercedes won’t start, and it’s not the battery.

2009 ML-320 – same problem but happens very rarely, often a month between. Drive 30 minutes with a lot of stop and go. Try to restart a few minutes later, the starter turns over 10 seconds and then stops. Wait 10 minutes and it starts and works perfectly. I replaced the crankshaft sensor a few months back and it has happened twice since then.

What causes battery to die on Mercedes medic?

A defective electrical system, Control Unit or a fault on the CAN Bus (Controller Area Network) are also causes that can cause your Mercedes-Battery battery to die. To troubleshoot the current draw, you need a multimeter that can perform current reading.

I own a 1999 ML430, and the one anomally that I experience is that when I try to restart after it dies, the ignition goes into a continuous crank. It gets stuck in that mode and continues to crank unsuccessfully. Do you also experience this?

Why does my Mercedes Benz M class shut off?

Try to restart a few minutes later, the starter turns over 10 seconds and then stops. Wait 10 minutes and it starts and works perfectly. I replaced the crankshaft sensor a few months back and it has happened twice since then. 33 people found this helpful.

Where is the shut down button on a Mercedes Benz?

This is located behind your ignition tumbler. Remove the instrument cluster and remove the switch’s connector by wiggling it out very slowly and carefully. Remove the three screws, replace the unit, reinstall the three screws and reinstall the connector.

What causes a Mercedes Benz to not start?

In most cases you will get a fault code related to one of the following: 1 ECM / PCM computer failure 2 Camshaft position sensor 3 Shifter Selector module 4 Fault codes related to driver authorization or immobilizer 5 Electrical problems

Why is the battery on my Mercedes Benz not working?

Hint: Starter Problem or Low Battery This may seem obvious, but an old battery is the root of many headaches and can cause all sorts of malfunctions on Mercedes-Benz cars. How old is the battery on your Mercedes-Benz?

Are there any problems with my Mercedes 320 SLK?

I just purchased a new 2001 320 SLK automatic 20,000 miles over thanksgiving and haven’t really had any problems with it until recently when I found out some rodents were chewing through some wires and one of my gaskets was leaking gas.

How many times has my Mercedes Benz C300 been towed?

My 2010 C300 has been towed 5 times in 3 years as it won’t start. Today, first warm and humid day – call the tow truck. The dealer has no idea !! 68 people found this helpful. I have experienced the same issue as well.

How many times has my Mercedes C class not started?

It will cost you around 1200 to replace because of the computer system. 66 people found this helpful. My 2010 C300 has been towed 5 times in 3 years as it won’t start. Today, first warm and humid day – call the tow truck. The dealer has no idea !!

How long is the drive cycle for a Mercedes?

2. On-Board Diagnostic System (OBDII) used on the vehicle, are ME1.0, ME2.0 or ME2.1 systems. 3. Performing the drive cycle on the vehicle will take up to 1 1/2 hours. 4. Required tools are: SDS equipment and all required cables. Readiness/function codes cannot be displayed for tests performed on vehicles at altitudes above 8200 feet.

Can a 2002 Mercedes Benz drive cycle be incomplete?

Also, one customer with a 2002 Mercedes was unable to complete the secondary air injection monitor until one evening he allowed his vehicle to idle for 5-20 minutes in his driveway. He then turned off his vehicle and restarted the vehicle the next morning and allowed it to idle for another 5-10 minutes.

Is there a service bulletin for a Mercedes Benz?

We located a Mercedes Benz Service Bulletin (S-B-14.00/17) that may be helpful. Also, one customer with a 2002 Mercedes was unable to complete the secondary air injection monitor until one evening he allowed his vehicle to idle for 5-20 minutes in his driveway.

Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.

Try to restart a few minutes later, the starter turns over 10 seconds and then stops. Wait 10 minutes and it starts and works perfectly. I replaced the crankshaft sensor a few months back and it has happened twice since then. 33 people found this helpful.

What causes problems with Mercedes CAN bus system?

Congestion at any point can cause problems. Traffic backs up, then gridlock causes everything to stop, and that takes time to clear. CAN bus systems are not new.

I took it to autozone and it said the EGR Valve was bad. It was replaced yesterday and today when I drove my car, it shut off while I was driving it and now it won’t start. Just had the crankshaft position sensor replaced today and now my SUV has started and will post if the problem still happens.

What to do when your Mercedes Benz shuts off?

Drive 30 minutes with a lot of stop and go. Try to restart a few minutes later, the starter turns over 10 seconds and then stops. Wait 10 minutes and it starts and works perfectly. I replaced the crankshaft sensor a few months back and it has happened twice since then. 23 people found this helpful.

When does a car engine stall while driving?

The stalling only occurs when the engine has reached operating temperature (15-20 min driving). It stalls very quietly with NO jerking, shaking, surging or choking. It seems as soon as driver foot leaves the accelerator paddle, at low speed, the engine stalls.

What are the problems with a 2005 Mercedes Benz ML350?

Worst 2005 Mercedes-Benz ML350 Problems #1: Idler Pulley Bolt Broke Off In Engine Block 2005 ML350 Average Cost to Fix: $3,500 #2: Air Bag Sensor Went Out 2005 ML350 Average Cost to Fix: $700 #3: Power Steering Pump Stopped Working 2005 ML350 Average Cost to Fix: $500

What to do when your Mercedes goes into limp mode?

You may also get a check engine light if your transmission goes into limp mode. When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level.

How much is a 2002 Mercedes Benz CLK Class worth?

Compare to Similar Vehicles Used 2002 Mercedes-Benz CLK-Class Used 2010 Chevrolet Cobalt See Details Price $5,360 $5,381 KBB.com Rating N/A N/A Consumer Rating 4.4 4.5

What should I do if my Mercedes battery dies?

If the battery should die on your Mercedes-Benz, the airbag light on the instrument panel may stay on after you hook up a new battery. The oil light indicator also may stay on, and the radio may not work until you reset its code. You can reset the airbag and oil lights with a service-light reset tool…

Why does my car stall at a stop light?

While stopped at a stop light, my car will start to sputter as if it’s a bout to stall for a moment. Then, the car will rev up a bit and idle back up on its own. Also, after I stopped briefly to make a turn, when I pressed on the gas pedal it took about four seconds before the car would accelerate properly.

How often does a Mercedes Benz turn signal malfunction?

Traffic Law Headquarters reported that about 2 million crashes per year are a result of failure to signal. A warning may or may not show on your Mercedes dashboard depending on its model and the problem. “Turn Signal Left / Right / Front / Rear / Side Malfunction” warning may appear on electronic instrument cluster on newer Mercedes models.

Can a car stall at a stop light?

I have a 2003 C240 sedan and I’m having the same problem. However, my car does not completely stall. While stopped at a stop light, my car will start to sputter as if it’s a bout to stall for a moment. Then, the car will rev up a bit and idle back up on its own.

When does the engine stall in a Mercedes?

There are never any notifications on the dash or any signs of it beginning to fail. This typically happens when I’m slowing down at an intersection or just driving slower in traffic.

How to reset service light indicator Mercedes ML350 4Matic?

From years: 2005, 2006, 2007, 2008, 2009, 2010, 2011. How to reset service light indicator Mercedes ML350 4Matic (164.186). Turn ignition on, do not start engine. From mileage screen press “R” 3 times quickly to show voltage screen. Picture below. . Use up and down arrows to bring up “Service menu”.

Why is the brake light switch on my Mercedes not working?

If you don’t see the letters on the cluster change from P to R to N, it is a good sign that the gear selector module is defective. You can buy a new brake light switch on Amazon for less than $15 USD, just do a search for Mercedes-Benz Brake Light Switches.

What causes a Mercedes Benz M class to stop?

11 people found this helpful. Hi Mark, car was stopping due to disconnection of wiring on footwell under carpet. This was caused by blockage on water vent under box below windscreen causing water to enter car down footwell. Regards, Bryan 6 people found this helpful.

How long does it take to replace a Mercedes battery?

Replacing the battery on a Mercedes-Benz car is easy and straight forward. The whole process of installing a Mercedes battery takes about 20 minutes. When you compare Mercedes-Benz battery replacement procedure with the procedure to replace the battery on a BMW, Mercedes is much simpler and easier.

How do you remove battery from Mercedes medic?

Disconnect the negative battery terminal first. You will need to loosen the 10mm bolt and pull the terminal away from the post. If the terminal doesn’t come out very easily, try twisting the terminal then pull it. Don’t use extreme force. If the battery cable clamp is stuck, use a battery terminal puller. Disconnect the positive battery terminal.

How to put Mercedes Benz ML320 in low range?

How to put Mercedes-Benz SUV (example ML320) in LOW RANGE mode. In order to set your ML in LOW Range mode you need to: Press the brake pedal and move the gear selector to Neutral position. Press the LOW RANGE switch on the dashboard for a couple of seconds.

Can you drive a Mercedes with low range?

If the Low Range Light flashes three times and then it goes off when you first start the car, you can drive your Mercedes-Benz SUV (such as ML320, ML350) normally. It just means that you will now be able to engage the Low Range if you try to go off road – on a very steep incline.

What should I do if my headlight is not working?

Unplug the light, pull the switch, and see if the fuse blows. If not, the problem is not in the wiring. Make sure you have purchased the correct wattage of bulb. Ensure that you do not have a faulty or damaged bulb. Check and see if your high beam bulb is the issue. If so, replace it. Check all wired connections and look for any exposed wiring.

What to do if your headlight Fuse has melted?

Check your car’s owner’s manual for information on how to access the fuses and where they are located. Check for melted wires leading to any of the fuses, and replace said fuses if necessary. Use a voltmeter to make sure that power is actually running to your headlight.

What should I do if my Mercedes engine stops working?

Be aware that if you reset the unit and it again stops working, you need to take the vehicle in to the dealership for repairs. Insert the key into the Mercedes ignition and turn the ignition cylinder to the “2” position.

How does the defrost button on a Mercedes work?

The defrost button has three lines going through it, while the recirculated air button has a picture of a car with a curved line through it. Hold these buttons down for about five to 10 seconds, or until the LED lights on both buttons start flashing. Wait 45 to 60 seconds for the LED lights to stop flashing. Then turn off the car.

How much does a 2001 Mercedes E Class E 320 cost?

See pricing for the Used 2001 Mercedes-Benz E-Class E 320 Sedan 4D. Get KBB Fair Purchase Price, MSRP, and dealer invoice price for the 2001 Mercedes-Benz E-Class E 320 Sedan 4D. View local inventory and get a quote from a dealer in your area. Home Car Values Price New/Used My Car’s Value Instant Cash Offer Cars for Sale Cars for Sale Sell Your Car

Who is the Mercedes mechanic for the E320?

Answered in 1 minute by: 3/29/2012 Mercedes Mechanic: Marty, Mercedes Technician replied 9 years ago Marty, Mercedes Technician Category: Mercedes Satisfied Customers:57,141 Experience: Bosch Certified Master Tech. Over 35 years experience. Verified eurotec :

What kind of compressor does a 2002 Mercedes E320 have?

2002 Mercedes E320 compressor had 12 volts but won’t engage .  read more Lou Palomino associates in automotive technology 11,061 satisfied customers EC light will not turn off not getting air conditioning

How much does a 2001 Mercedes Benz cost?

Mercedes-Benz of Arcadia Used 2003 Mercedes-Benz E 320 Sedan $5,799 Baldwin Auto Sales Used 2003 Mercedes-Benz E 320 Sedan $5,999 Carbook Used 2001 Mercedes-Benz E 320 Sedan $6,990 Driveway Used 2002 Mercedes-Benz E 320 Sedan $9,999 VW-BENZ Used 2001 Mercedes-Benz E 320 Sedan New Listing $13,991 Mercedes Benz of West Covina

What happens when a Mercedes Benz goes into limp mode?

When a Mercedes-Benz goes into limp mode, it only operates in second gear and reverse only. When you put it in gear, you may also feel a bang as transmission engages. The first thing you should try is to check the transmission fluid level. The transmission has a dipstick tube but with no dipstick in it.

Where are the transmission codes stored in a Mercedes?

Specific codes related to the transmission are stored in the TCU (Transmission Control Unit) and come generic codes such as P0705 are stored in ECU (Engine Control Unit). You don’t need to pay anyone to read the codes; you can retrieve them yourself in a couple of minutes with the right OBD II scanner.

Why is the traction control on my 2001 ML320 breaking?

What occurs is that the Traction Control System believes you are driving with one foot on the brake and one on the gas pedal and returns the Throttle Actuator to the idle position. Remove the cover below the instrument panel and then your present Brake Light Sw. and follow the instructions as if you were replacing a new one.

How to troubleshoot Mercedes Benz no audio troubleshooter?

SLK 99-02 ML 01-02 Troubleshooting “No Audio” for your specific Mercedes-Benz, ML, S, and SL. Mercedes Benz SL NO AUDIO Locating and Troubleshooting Components in Fiber Optic Loop Mercedes SL NOTE- When troubleshooting, check fiber optic cable for damage near hinge and piston for center console at front of voice control module.

What to do if your Mercedes key won’t turn?

If you have this problem you will have to install a new / virgin EIS. You can not install a used unit because the EIS has to be paired / married to the car using Mercedes-Benz Star Diagnostic Software. They key itself may be the reason why the car doesn’t start. The key may open the doors, but it will not start the car.

This Mercedes-Benz is not starting because of a low battery. In this case, what you need to do is trickle charge your battery using any of these 12 volt battery trickle chargers. If you need help read this article on How to charge a Mercedes-Benz the right way. Mercedes won’t start, and it’s not the battery.

11 people found this helpful. Hi Mark, car was stopping due to disconnection of wiring on footwell under carpet. This was caused by blockage on water vent under box below windscreen causing water to enter car down footwell. Regards, Bryan 6 people found this helpful.

When did the Mercedes-Benz ML 400 CDI come out?

At the same time, the ML 430 was replaced by the 5.0-litre V8-powered ML 500 and a new 4.0-litre V8 turbodiesel ML 400 CDI became available in Europe. The following year, in 2002, Mercedes-Benz launched the ML 350 fitted with a 3.7-litre V6 engine. The ML 350 replaced the ML 320 in some markets, but supplemented it in others.

Is the Mercedes-Benz ML the same as the M class?

This forced Mercedes-Benz to defer to a double-tiered marketing strategy of “ML” badging (e.g. ML 320) under an M-Class umbrella. There has been some confusion surrounding this nomenclature, with many sources erroneously referring to the series as the “ML-Class”, including Mercedes-Benz itself.

When did the Mercedes-Benz ML 450 Hybrid come out?

At the 2009 New York International Auto Show, Mercedes-Benz showed their ML 450 Hybrid SUV, which was announced on 8 April 2009. The ML 450 Hybrid consumes almost 50% less fuel than the ML 550 does, even though it produces over 90% of the power generated by the V8 model.

When do you miss the reduce speed ahead sign?

Say you’re driving on your local road, and you enter a construction zone. The construction is wrapping up for the day, the sun is coming down, and you just miss the “Reduce Speed Ahead” sign. You come to the Stop sign and notice a state trooper pulled up behind you.

Why is my electric seat not working on my CLK 320?

My CLK 320 electric seat on the driver side is not functioning, the forward and backward movement is not working but the back rest and the head rest works perfectly. Can someone advice how i can shift my seat backward to the position i preferred for driving?

What kind of fuel does a Mercedes CLK 320 use?

The Mercedes-Benz CLK 320 is available in a number of variants and body types that are powered by PULP and ULP fuel type (s). It has an estimated fuel consumption starting from 7.95L/100km for Convertible /PULP for the latest year the model was manufactured.

How much does a Mercedes CLK 320 cost?

Starting at $16,720 and going to $72,380 for the latest year the model was manufactured. The model range is available in the following body types starting from the engine/transmission specs shown below. The Mercedes-Benz CLK 320 has a number of different wheel and tyre options.

How big are the tyres on a Mercedes CLK 320?

The Mercedes-Benz CLK 320 has a number of different wheel and tyre options. When it comes to tyres, these range from 205×55 R16 for Convertible in 2005 with a wheel size that spans from 16×7 inches. The dimensions shown above are for the base model. See All Mercedes-Benz CLK 320 Wheel Sizes

Why does my ML not start while driving?

One might be the cause of the battery drain or not starting then your ML may have lost the key information. If it wouldn’t start or it stop while driving but after say 30 minutes it would start and run normally then it might be your crank shaft position sensor. $50 sensor back of engine drivers side about 10 minutes to diy fix.

Can a pre 2000 ml lose its settings?

On the early pre 2000 ml’s the aam can loose it’s settings when disconnected from the battery. These can include the ignition key sync or even the keys rfid information. If when you try to start it starts then run some for maybe a half second before shutting down this could be your problem.

One might be the cause of the battery drain or not starting then your ML may have lost the key information. If it wouldn’t start or it stop while driving but after say 30 minutes it would start and run normally then it might be your crank shaft position sensor. $50 sensor back of engine drivers side about 10 minutes to diy fix.

When did Mercedes AMG become part of Mercedes Benz?

In 1990, AMG signed a co-operation agreement with Daimler-Benz, and AMG options and cars were then offered in Mercedes-Benz showrooms; in 1999 Daimler AG, then known as DaimlerChrysler AG, bought the controlling share of AMG and made them part of the official Mercedes-Benz line-up.

Why does my Mercedes Benz alarm keep going off?

There are a few common causes that will set your alarm off in your Mercedes-Benz. The most common is an issue with the battery. However, if you are unsure where to begin, continue reading as this article will cover the possible causes for an errant alarm. A low or depleted car battery can lead to a malfunctioning car alarm.

What does it mean when a Mercedes is stuck in Park?

Mercedes stuck in Park (P)and refuse to go to D or N. Stuck in D, R, N and will not move back to Park (P). Can’t remove keys from the ignition. Mercedes transmission won’t go into drive. Mercedes E, S, C, ML Class gear shift stuck in park. Mercedes will start, but transmission won’t go into gear.

How does Mercedes lowers the drops when parked?

Mercedes lowers drops on rear or front. When the car is parked the airmatic will try to level the car. It does this by discharging air from the airmatic suspension strut that is too high. Typically the car is leveled by lowering the one or two corners of the car that are too high.


Can a car go over 100, 000 miles?

Although many cars in the past couldn’t be trusted to cross the 100,000-mile threshold without serious issues, things are a lot more nuanced today. Many cars will have no trouble passing 200,000 miles without any significant issues — while many others still adhere to the 100,000-mile cutoff.

What’s the new 100, 000 mile mile point?

In other words: What is the “new” 100,000-mile point, the figure you don’t want to cross, fearing that you might be purchasing a car at the end of its life? And my answer is — just like it usually is when I write these columns — it depends.

Why does my 2001 ML320 break by itself?

I have 2001 ML320 which I really enjoy driving, got 170K running strong. However I just ran into strange issue as I was driving, car felt like the engine was going die as it suddenly lost speed, turns out the brake is acting up by itself, then I see exclamation mark flashing in dashboard and BAS/ETS light come up.

How can I drive without fear of my ml braking itself?

You can drive without fear of your ML braking itself by pressing the ESP off button. You have to switch it off every time you start the car. Then you’ll have more time to save up for the yaw rate sensor. Don’t let it go forever. just saw the switch. You can drive without fear of your ML braking itself by pressing the ESP off button.

There are never any notifications on the dash or any signs of it beginning to fail. This typically happens when I’m slowing down at an intersection or just driving slower in traffic.

Why does my car stall after a few miles?

When a bad module is responsible for an intermittent stalling problem, the engine will usually cold start just fine and run OK for short distances, but stalls after driving more than a few miles or when driving at highway speeds (especially during hot weather). It’s as if somebody suddenly turned off the ignition.

What happens when a car stalls at low speed?

It stalls very quietly with NO jerking, shaking, surging or choking. It seems as soon as driver foot leaves the accelerator paddle, at low speed, the engine stalls. Most of the time after stalling the engine starts up right away, but sometimes it just cranks.

Is there such a thing as a random engine stall?

Random Engine Stall, decreasing idle too… I have a 2002 C240 and I’ve recently had an issue while driving. I’ve read similar posts to this one but someone always writes their own issues that are different from this matter.

How long does it take for car engine to start after stalling?

Most of the time after stalling the engine starts up right away, but sometimes it just cranks. After 30 min waiting or when engine get cooler, it starts every time. I am the only owner of this car. It’s been well maintained and cared for.

Posted In Q&A