Why are the lights blinking on my Dakota?
There are a number of things that could cause this, including bad connections in various wiring harness connectors. A somewhat common problem of intermittently blinking lights for that year Dakota is the Light Switch mounted on the instrument panel.
Why are my blinkers and radio not working?
Once you know where that relay housing is, you can reach underneath to the right of the support column and feel it without pulling off that lower dash section, and you would need to lift the housing upwards to remove it from the connector socket..My radio and blinkers stopped working along with my heater fan at any speeds.
Why are the lights on my instrument panel blinking?
A somewhat common problem of intermittently blinking lights for that year Dakota is the Light Switch mounted on the instrument panel. Thanks Dusty………I suspected it could be the light switch because I couldn’t find a relay or any other electrical device that controlled all the lights. I will replace the switch and see what happens.
Why did my turn signal light up after the Flasher was removed?
(That’s why they didn’t work after new signal were installed and also why they would still light even after the flasher was removed.) Since the Brown/Blue buzzer lead is connected to the Orange or Blue turn signal leads when the switch is activated, that is why the signals only came on (and didn’t flash) when the switch was avtivated.
Why does my bike Flasher not come on?
The proper bulbs come on when the switch is moved L or R, but they just don’t flash. The same thing happens when the flasher is completely removed from the bike. This means the bulbs are getting their current from somewhere other than the grey lead from the flasher.
How does a lamp flasher work on a lamp?
The flasher is connected to “ignition” (switch on) power fthen the flasher output connects to the switchpod signal switch (grey wire) When you activaet the switch and a lamp load is connected the flasher is on at first then starts to flash off-on-off-on.
Why does the Brown buzzer only flash when avtivated?
Since the Brown/Blue buzzer lead is connected to the Orange or Blue turn signal leads when the switch is activated, that is why the signals only came on (and didn’t flash) when the switch was avtivated.